(HC){sub 3} process - An economical technology for upgrading bitumen and heavy oil
- Alberta Dept. of Energy, Calgary (Canada); and others
This paper discusses the development of the (HC){sub 3} Process. (HC){sub 3} is a high conversion hydro-cracking process with integrated hydro-treating that has been developed by Alberta Department of Energy, Oil Sands and Research Division. The (HC){sub 3} Process has been developed and demonstrated to achieve conversion in excess of 95% at moderate pressures and relatively high temperature in a very cost effective manner. This has been achieved with the aid of a colloidal catalyst that selectively converts the asphaltenes, and a proprietary recycle methodology that significantly reduces the catalyst consumption. Cost and economic studies indicate that capital and operating costs of the (HC){sub 3} upgrading scheme are lower than those of other high conversion schemes and are comparable to those of low and moderate conversion upgrading schemes. This cost advantage combined with the high yield gives the (HC){sub 3} a significant economic advantage over other upgrading schemes. The (HC){sub 3} process shows great promise at achieving high conversion efficiently and economically. The process is ready for commercial testing. Discussions are underway with regards to testing the process in a commercial facility designed to process nominally 5000 barrels per day (BPD).
- OSTI ID:
- 229596
- Report Number(s):
- CONF-9502114-Vol.2; TRN: 96:000932-0028
- Resource Relation:
- Conference: 6. UNITAR international conference on heavy crude and tar sands on fueling for a clean and safe environment, Houston, TX (United States), 12-17 Feb 1995; Other Information: PBD: [1995]; Related Information: Is Part Of Heavy crude and tar sands -- Fueling for a clean and safe environment. Proceedings: Volume 2; Meyer, R.F. [ed.]; PB: 733 p.
- Country of Publication:
- United States
- Language:
- English
Similar Records
Bench-scale co-processing economic assessment. Final report
Development of the Write Process for Pipeline-Ready Heavy Oil