Heating performances of a IC in-blanket ring array
- Laboratory for Plasma Physics-LPP-ERM/KMS, Brussels (Belgium)
An important limiting factor to the use of ICRF as candidate heating method in a commercial reactor is due to the evanescence of the fast wave in vacuum and in most of the SOL layer, imposing proximity of the launching structure to the plasma boundary and causing, at the highest power level, high RF standing and DC rectified voltages at the plasma periphery, with frequent voltage breakdowns and enhanced local wall loading. In a previous work [1] the concept for an Ion Cyclotron Heating & Current Drive array (and using a different wave guide technology, a Lower Hybrid array) based on the use of periodic ring structure, integrated in the reactor blanket first wall and operating at high input power and low power density, was introduced. Based on the above concept, the heating performance of such array operating on a commercial fusion reactor is estimated.
- OSTI ID:
- 22496207
- Journal Information:
- AIP Conference Proceedings, Vol. 1689, Issue 1; Conference: 21. topical conference on radio frequency power in plasmas, Lake Arrowhead, CA (United States), 27-29 Apr 2015; Other Information: (c) 2015 AIP Publishing LLC; Country of input: International Atomic Energy Agency (IAEA); ISSN 0094-243X
- Country of Publication:
- United States
- Language:
- English
Similar Records
Design, performance, and grounding aspects of the International Thermonuclear Experimental Reactor ion cyclotron range of frequencies antenna
Study of the effects of corrugated wall structures due to blanket modules around ICRH antennas