skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Influence of annealing on the optical properties of vacuum deposited silver thin films

Journal Article · · AIP Conference Proceedings
DOI:https://doi.org/10.1063/1.4917975· OSTI ID:22490430
 [1];  [2];  [3]
  1. Department of Physics, NMSSVN College, Madurai-625019 (India)
  2. School of Basic Engineering and Sciences, PSN Engineering College, Melathidior, Thirunelvelli-627152 (India)
  3. School of Physics, Madurai Kamaraj University, Madurai-625021 (India)

Thin Silver films of thickness 15nm were prepared by thermal evaporation on well cleaned glass substrates at room temperature at a pressure of 2×10{sup −5} mbar with the deposition rate of 0.01À/sec and annealed in air for an hour at temperatures between 300°c and 400°c. The prepared films were characterized by X-ray diffraction (XRD), UV-visible spectroscopy and AFM. The mean grain size of the film at different annealing temperatures was determined by the X-ray diffraction pattern by using Scheer’s formula. It is found that from absorbance studies surface Plasmon peak position decreases as the annealing temperature increases and blue shifted. And also from transmittance studies the thermal effect of silver film strongly affects the optical transmittance. From AFM studies the average particle size and RMS surface roughness increase with increase of annealing temperatures.

OSTI ID:
22490430
Journal Information:
AIP Conference Proceedings, Vol. 1665, Issue 1; Conference: 59. DAE solid state physics symposium 2014, Tamilnadu (India), 16-20 Dec 2014; Other Information: (c) 2015 AIP Publishing LLC; Country of input: International Atomic Energy Agency (IAEA); ISSN 0094-243X
Country of Publication:
United States
Language:
English