Effect of temperature and aluminium on calcium (alumino)silicate hydrate chemistry under equilibrium conditions
- Laboratory for Concrete and Construction Chemistry, EMPA, Dübendorf 8600 (Switzerland)
There exists limited information regarding the effect of temperature on the structure and solubility of calcium aluminosilicate hydrate (C–A–S–H). Here, calcium (alumino)silicate hydrate (C–(A–)S–H) is synthesised at Ca/Si = 1, Al/Si ≤ 0.15 and equilibrated at 7–80 °C. These systems increase in phase-purity, long-range order, and degree of polymerisation of C–(A–)S–H chains at higher temperatures; the most highly polymerised, crystalline and cross-linked C–(A–)S–H product is formed at Al/Si = 0.1 and 80 °C. Solubility products for C–(A–)S–H were calculated via determination of the solid-phase compositions and measurements of the concentrations of dissolved species in contact with the solid products, and show that the solubilities of C–(A–)S–H change slightly, within the experimental uncertainty, as a function of Al/Si ratio and temperature between 7 °C and 80 °C. These results are important in the development of thermodynamic models for C–(A–)S–H to enable accurate thermodynamic modelling of cement-based materials.
- OSTI ID:
- 22475483
- Journal Information:
- Cement and Concrete Research, Vol. 68; Other Information: Copyright (c) 2014 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.; Country of input: International Atomic Energy Agency (IAEA); ISSN 0008-8846
- Country of Publication:
- United States
- Language:
- English
Similar Records
X-ray photoelectron spectroscopic investigation of nanocrystalline calcium silicate hydrates synthesised by reactive milling
Transformation of meta-stable calcium silicate hydrates to tobermorite: reaction kinetics and molecular structure from XRD and NMR spectroscopy