Vacuum ultraviolet photochemical selective area atomic layer deposition of Al{sub 2}O{sub 3} dielectrics
- Centre for Materials and Structures, University of Liverpool, Liverpool, L69 3GH (United Kingdom)
We report the photochemical atomic layer deposition of Al{sub 2}O{sub 3} thin films and the use of this process to achieve area-selective film deposition. A shuttered vacuum ultraviolet (VUV) light source is used to excite molecular oxygen and trimethyl aluminum to deposit films at 60°C. In-situ QCM and post-deposition ellipsometric measurements both show that the deposition rate is saturative as a function of irradiation time. Selective area deposition was achieved by projecting the VUV light through a metalized magnesium fluoride photolithographic mask and the selectivity of deposition on the illuminated and masked regions of the substrate is a logarithmic function of the UV exposure time. The Al{sub 2}O{sub 3} films exhibit dielectric constants of 8 – 10 at 1 MHz after forming gas annealing, similar to films deposited by conventional thermal ALD.
- OSTI ID:
- 22454421
- Journal Information:
- AIP Advances, Vol. 5, Issue 1; Other Information: (c) 2015 Author(s); Country of input: International Atomic Energy Agency (IAEA); ISSN 2158-3226
- Country of Publication:
- United States
- Language:
- English
Similar Records
Site-Selective Atomic Layer Deposition on Rutile TiO2: Selective Hydration as a Route to Target Point Defects
Atomic layer deposition TiO2-Al2O3 stack: An improved gate dielectric on Ga-polar GaN metal oxide semiconductor capacitors