Fabrication of high-performance ultra-thin-body SnO{sub 2} thin-film transistors using microwave-irradiation post-deposition annealing
- Department of Electronic Materials Engineering, Kwangwoon University, 20 Gwangun-ro, Nowon-gu, Seoul 139-701 (Korea, Republic of)
We report on the fabrication of high-performance ultra-thin-body (UTB) SnO{sub 2} thin-film transistors (TFTs) using microwave-irradiation post-deposition annealing (PDA) at a low process temperature (<100 °C). We confirm that the electrical characteristics of SnO{sub 2} TFTs become drastically enhanced below a body thickness of 10 nm. The microwave-annealed UTB SnO{sub 2} TFTs with a thickness of 5 nm exhibited increased optical transmittance, as well as remarkable transfer characteristics: a high mobility of 35.4 cm{sup 2} V{sup −1} s{sup −1}, a drain current on/off ratio of 4.5 × 10{sup 7}, a steep subthreshold gate voltage swing of 623 mV/dec, and a clear enhancement-mode behavior. Additionally, the microwave-annealed SnO{sub 2} TFTs exhibited a better positive gate-bias stress/negative gate-bias stress immunity than thermally annealed SnO{sub 2} TFTs. Therefore, the thickness of the UTB SnO{sub 2} TFTs, as well as the microwave-annealing process, are both shown to be essential for transparent and flexible display technology.
- OSTI ID:
- 22415212
- Journal Information:
- Applied Physics Letters, Vol. 106, Issue 4; Other Information: (c) 2015 AIP Publishing LLC; Country of input: International Atomic Energy Agency (IAEA); ISSN 0003-6951
- Country of Publication:
- United States
- Language:
- English
Similar Records
Improvement in gate bias stress instability of amorphous indium-gallium-zinc oxide thin-film transistors using microwave irradiation
Mitigating Heavy Ion Irradiation‐Induced Degradation in p‐type SnO Thin‐Film Transistors at Room Temperature