Analysis of ringing effects due to magnetic core materials in pulsed nuclear magnetic resonance circuits
- Department of Electrical and Computer Engineering, Iowa State University, Ames, Iowa 50011 (United States)
- Schlumberger-Doll Research, Cambridge, Massachusetts 02139 (United States)
This work presents investigations and detailed analysis of ringing in a non-resonant pulsed nuclear magnetic resonance (NMR) circuit. Ringing is a commonly observed phenomenon in high power switching circuits. The oscillations described as ringing impede measurements in pulsed NMR systems. It is therefore desirable that those oscillations decay fast. It is often assumed that one of the causes behind ringing is the role of the magnetic core used in the antenna (acting as an inductive load). We will demonstrate that an LRC subcircuit is also set-up due to the inductive load and needs to be considered due to its parasitic effects. It is observed that the parasitics associated with the inductive load become important at certain frequencies. The output response can be related to the response of an under-damped circuit and to the magnetic core material. This research work demonstrates and discusses ways of controlling ringing by considering interrelationships between different contributing factors.
- OSTI ID:
- 22410157
- Journal Information:
- Journal of Applied Physics, Vol. 117, Issue 17; Other Information: (c) 2015 AIP Publishing LLC; Country of input: International Atomic Energy Agency (IAEA); ISSN 0021-8979
- Country of Publication:
- United States
- Language:
- English
Similar Records
Magnetic dipole discharges. II. Cathode and anode spot discharges and probe diagnostics
Compressed magnetic flux amplifier with capacitive load