Post-assembly magnetization of a 100 kW high speed permanent magnet rotor
- Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology, Wuhan (China)
A post-assembly magnetizing fixture has been designed and successfully used to magnetize the rotor of a 100 kW high speed permanent magnet synchronous motor. The rotor is a solid cylinder with outer diameter of 80 mm and total length of 515 mm. The permanent magnet material is samarium-cobalt (Sm{sub 2}Co{sub 17}) with saturation magnetizing field of 6 T. The mechanical stability of the magnetizing fixture has been studied as well as the general design methodology. The magnetizing coil is subdivided in order to reduce the electromagnetic force, and the coils are separately reinforced in different ways. The electromagnetic and structural optimization is performed by finite element analysis and verified by experiments.
- OSTI ID:
- 22392421
- Journal Information:
- Review of Scientific Instruments, Vol. 86, Issue 3; Other Information: (c) 2015 AIP Publishing LLC; Country of input: International Atomic Energy Agency (IAEA); ISSN 0034-6748
- Country of Publication:
- United States
- Language:
- English
Similar Records
Loss Breakdown of a Dual Conical Rotor Permanent Magnet Motor Using Grain Oriented Electrical Steel and Soft Magnetic Composites
Magnetic measurements of permanent magnet insertion devices at the BNL-NSLS (Brookhaven National Laboratory--National Synchrotron Light Source)