Use of double-layer ITO films in reflective contacts for blue and near-UV LEDs
- Russian Academy of Sciences, Ioffe Physical-Technical Institute (Russian Federation)
- ZAO Innovation Company TETIS (Russian Federation)
The structural and optical properties of multilayer ITO/SiO{sub 2}/Ag composites are studied. In these composites, the ITO (indium-tin oxide) layer is produced by two different methods: electron-beam evaporation and a combined method including electron-beam evaporation and subsequent magnetron sputtering. It is shown that the reflectance of the composite based on the ITO film produced by electron-beam evaporation is substantially lower. This can be attributed to the strong absorption of light at both boundaries of the SiO{sub 2} layer, which results from the complex surface profile of ITO films deposited by electron-beam evaporation. Samples with a film deposited by the combined method have a reflectance of about 90% at normal light incidence, which, combined with their higher electrical conductivity, makes these samples advantageous for use as reflective contacts to the p-type region of AlInGaN light-emitting diodes of the flip-chip design.
- OSTI ID:
- 22300398
- Journal Information:
- Semiconductors, Vol. 48, Issue 12; Other Information: Copyright (c) 2014 Pleiades Publishing, Ltd.; Country of input: International Atomic Energy Agency (IAEA); ISSN 1063-7826
- Country of Publication:
- United States
- Language:
- English
Similar Records
Technique for the Formation of Antireflection Coatings Based on ITO Films
Technique for forming ITO films with a controlled refractive index