Diameter and wall number control of carbon nanotubes by chemical vapor deposition
- Department of Engineering, University of Cambridge, Cambridge CB2 1PZ (United Kingdom)
We analyze the relationship between the average wall number (N) and the diameter (d) for carbon nanotubes (CNTs) grown by chemical vapour deposition. It is found that N depends linearly on d for diameters in the range of 2.5–10 nm, while single wall nanotubes predominate for diameters under about 2.1 nm. The linear relationship is found to depend somewhat on the growth conditions. It is also verified that the mean diameter depends on the diameter of the originating catalyst nanoparticle, and thus on the initial catalyst thickness where a thin film catalyst is used. This simplifies the characterisation of CNTs by electron microscopy. We also find a linear relationship between nanotube diameter and initial catalyst film thickness.
- OSTI ID:
- 22267797
- Journal Information:
- Journal of Applied Physics, Vol. 114, Issue 24; Other Information: (c) 2013 AIP Publishing LLC; Country of input: International Atomic Energy Agency (IAEA); ISSN 0021-8979
- Country of Publication:
- United States
- Language:
- English
Similar Records
Oxygen-promoted catalyst sintering influences number density, alignment, and wall number of vertically aligned carbon nanotubes
Effect of catalyst film thickness on carbon nanotube growth by selective area chemical vapor deposition