Beryllium liner implosion experiments on the Z accelerator in preparation for magnetized liner inertial fusion

Journal Article · Wed May 15 00:00:00 EDT 2013 · Physics of Plasmas

DOI:https://doi.org/10.1063/1.4803079· OSTI ID:22228098

McBride, R. D.; Martin, M. R.; Lemke, R. W.; Jennings, C. A.; Rovang, D. C.; Sinars, D. B.; Cuneo, M. E.; Herrmann, M. C.; Slutz, S. A.; Nakhleh, C. W.; Davis, J. -P.; Flicker, D. G.; Rogers, T. J.; Robertson, G. K.; Kamm, R. J.; Smith, I. C.; Savage, M.; Stygar, W. A.; Rochau, G. A.; Jones, M. ^[1] ; others, and

---

1. Sandia National Laboratories, Albuquerque, New Mexico 87185 (United States)

Multiple experimental campaigns have been executed to study the implosions of initially solid beryllium (Be) liners (tubes) on the Z pulsed-power accelerator. The implosions were driven by current pulses that rose from 0 to 20 MA in either 100 or 200 ns (200 ns for pulse shaping experiments). These studies were conducted in support of the recently proposed Magnetized Liner Inertial Fusion concept [Slutz et al., Phys. Plasmas 17, 056303 (2010)], as well as for exploring novel equation-of-state measurement techniques. The experiments used thick-walled liners that had an aspect ratio (initial outer radius divided by initial wall thickness) of either 3.2, 4, or 6. From these studies, we present three new primary results. First, we present radiographic images of imploding Be liners, where each liner contained a thin aluminum sleeve for enhancing the contrast and visibility of the liner's inner surface in the images. These images allow us to assess the stability of the liner's inner surface more accurately and more directly than was previously possible. Second, we present radiographic images taken early in the implosion (prior to any motion of the liner's inner surface) of a shockwave propagating radially inward through the liner wall. Radial mass density profiles from these shock compression experiments are contrasted with profiles from experiments where the Z accelerator's pulse shaping capabilities were used to achieve shockless (“quasi-isentropic”) liner compression. Third, we present “micro-B-dot ” measurements of azimuthal magnetic field penetration into the initially vacuum-filled interior of a shocked liner. Our measurements and simulations reveal that the penetration commences shortly after the shockwave breaks out from the liner's inner surface. The field then accelerates this low-density “precursor” plasma to the axis of symmetry.

• OSTI ID: 22228098
• Journal Information: Physics of Plasmas, Vol. 20, Issue 5; Other Information: (c) 2013 AIP Publishing LLC; Country of input: International Atomic Energy Agency (IAEA); ISSN 1070-664X
• Country of Publication: United States
• Language: English

Related Subjects

70 PLASMA PHYSICS AND FUSION TECHNOLOGY
ALUMINIUM
ASPECT RATIO
BERYLLIUM
COMPRESSION
EQUATIONS OF STATE
ICF DEVICES
INERTIAL CONFINEMENT
INERTIAL FUSION DRIVERS
LASER IMPLOSIONS
LASER-PRODUCED PLASMA
MAGNETIC FIELDS
PLASMA GUNS
PLASMA SIMULATION
SHOCK WAVES
WALL EFFECTS