skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: NOCHAR Polymers: An Aqueous and Organic Liquid Solidification Process for Cadarache LOR (Liquides Organiques Radioactifs) - 13195

Conference ·
OSTI ID:22224959
; ;  [1];  [2];  [3];  [4]
  1. AREVA CL BU, STMI ZAC de Courcelle 1 route de la Noue 91196 Gif-sur-Yvette (France)
  2. Pacific World Trade, Inc. Hillsdale Technical Center 6970 Hillsdale Court Indianapolis, Indiana 46250 (United States)
  3. CEA Cadarache, DSN/SGTD, 13108 St Paul Lez Durance Cedex (France)
  4. CEA Marcoule, DPAD, BP 17171, 30207 Bagnols sur Ceze Cedex (France)

To handle the Very Low Level Waste (VLLW) and the Low Level Waste (LLW) in France, two options can be considered: the incineration at CENTRACO facility and the disposal facility on ANDRA sites. The waste acceptance in these radwaste routes is dependent upon the adequacy between the waste characteristics (physical chemistry and radiological) and the radwaste route specifications. If the waste characteristics are incompatible with the radwaste route specifications (presence of significant quantities of chlorine, fluorine, organic component etc or/and high activity limits), it is necessary to find an alternative solution that consists of a waste pre-treatment process. In the context of the problematic Cadarache LOR (Liquides Organiques Radioactifs) waste streams, two radioactive scintillation cocktails have to be treated. The first one is composed of organic liquids at 13.1 % (diphenyloxazol, mesitylene, TBP, xylene) and water at 86.9 %. The second one is composed of TBP at 8.6 % and water at 91.4 %. They contain chlorine, fluorine and sulphate and have got alpha/beta/gamma spectra with mass activities equal to some kBq.g{sup -1}. Therefore, tritium is present and creates the second problematic waste stream. As a consequence, in order for disposal acceptance at the ANDRA site, it is necessary to pre-treat the waste. The NOCHAR polymers as an aqueous and organic liquid solidification process seem to be an adequate solution. Indeed, these polymers constitute an important variety of products applied to the treatment of radioactive aqueous and organic liquids (solvent, oil, solvent/oil mixing etc) and sludge through a mechanical and chemical solidification process. For Cadarache LOR, N910 and N960 respectively dedicated to the organic and aqueous liquids solidification are considered. With the N910, the organic waste solidification occurs in two steps. As the organic liquid travels moves through the polymer strands, the strands swell and immobilise the liquid. Then as the polymer-organic cure, over time, the polymer continues to collapse on the organic to create a permanent bond. The N960 has the ability to absorb aqueous waste up to 100 times its own weight. It creates a strong mechanical bond which permanently traps the contamination imbedded in the aqueous liquids. As a consequence, these two polymers seem to be able to constitute a suitable solidification matrix for a final acceptance in storage on ANDRA sites. In order to validate the polymers as an acceptable aqueous and organic solidification process for Cadarache LOR, some solidification tests realized with N910 and N960, have been carried out for different Waste/Polymer ratios. The determination of the best Waste/Polymer ratio and of the optimal experimental parameters has been made through an exudation test. Indeed, the process prevents leaching and it results in the absence of residual free organic or aqueous liquid which is forbidden in storage by ANDRA specifications. With these test results, we generated scientific data which are fundamental to obtain an ANDRA agreement. As a conclusion, the aim of this study is to demonstrate that the solidification by polymers can constitute a pre-treatment solution for Cadarache LOR and more generally, for various organic and mixed organic/aqueous waste which can not be directly acceptable at CENTRACO facility or at ANDRA storage sites. This work is, therefore, a solid background to demonstrate the feasibility of the waste pre-treatment by solidification with polymers and to encourage the development of this process. (authors)

Research Organization:
WM Symposia, 1628 E. Southern Avenue, Suite 9-332, Tempe, AZ 85282 (United States)
OSTI ID:
22224959
Report Number(s):
INIS-US-13-WM-13195; TRN: US14V0402045914
Resource Relation:
Conference: WM2013: Waste Management Conference: International collaboration and continuous improvement, Phoenix, AZ (United States), 24-28 Feb 2013; Other Information: Country of input: France; 2 refs.
Country of Publication:
United States
Language:
English