Improvements of fuel failure detection in boiling water reactors using helium measurements
- Chalmers Univ. of Technology, SE-412 96 Gothenburg (Sweden)
- Forsmarks Kraftgrupp AB, SE-742 03 Oesthammar (Sweden)
To certify a continuous and safe operation of a boiling water reactor, careful surveillance of fuel integrity is of high importance. The detection of fuel failures can be performed by off-line gamma spectroscopy of off-gas samples and/or by on-line nuclide specific monitoring of gamma emitting noble gases. To establish the location of a leaking fuel rod, power suppression testing can be used. The accuracy of power suppression testing is dependent on the information of the delay time and the spreading of the released fission gases through the systems before reaching the sampling point. This paper presents a method to improve the accuracy of power suppression testing by determining the delay time and gas spreading profile. To estimate the delay time and examine the spreading of the gas in case of a fuel failure, helium was injected in the feed water system at Forsmark 3 nuclear power plant. The measurements were performed by using a helium detector system based on a mass spectrometer installed in the off-gas system. The helium detection system and the results of the experiment are presented in this paper. (authors)
- Research Organization:
- American Nuclear Society, 555 North Kensington Avenue, La Grange Park, IL 60526 (United States)
- OSTI ID:
- 22107865
- Resource Relation:
- Conference: ICAPP '12: 2012 International Congress on Advances in Nuclear Power Plants, Chicago, IL (United States), 24-28 Jun 2012; Other Information: Country of input: France; 6 refs.; Related Information: In: Proceedings of the 2012 International Congress on Advances in Nuclear Power Plants - ICAPP '12| 2799 p.
- Country of Publication:
- United States
- Language:
- English
Similar Records
Sodium in-pile loop experiment on delayed neutron detector-, precipitator-, and cover-gas gamma-ray spectrometer-type fuel failure detection systems
Gaseous fission product management for molten salt reactors and vented fuel systems