Improvement of four anode rods ion source
- Accelerators and Ion Sources Department, Nuclear Research Center, Atomic Energy Authority, P. No. 13759 (Egypt)
- Physics Department, Faculty of Science, Helwan University, Cairo (Egypt)
In this work, an improved form of a saddle field ion source has been designed and constructed. It consists of four anode rods made from copper and two copper cathode discs. The two cathode discs are placed symmetrically on both sides of the four anode rods. The electrical discharge and output ion beam characteristics were measured at different pressures using argon gas. The optimum distance between each two anode rods was determined. Also the optimum distance between the four anode rods and any cathode disc was obtained. It was found that the optimum distance between each two anode rods equal to 6 mm, while the optimum distance between the four anode rods and any cathode disc equal to 16 mm, where a stable discharge current and maximum output ion beam current can be obtained. The effect of negative extraction voltage applied to both the extractor electrode and Faraday cup on the output ion beam current was studied. The sputter yield of copper and aluminum targets using argon ions of different energies was determined.
- OSTI ID:
- 22068446
- Journal Information:
- Review of Scientific Instruments, Vol. 82, Issue 3; Other Information: (c) 2011 American Institute of Physics; Country of input: International Atomic Energy Agency (IAEA); ISSN 0034-6748
- Country of Publication:
- United States
- Language:
- English
Similar Records
Ion source with low voltage extraction using glow discharge
Investigation of the pseudospark produced intense electron beam