skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Impact of boron dilution accidents on low boron PWR safety

Conference ·
OSTI ID:22039660
;  [1];  [2]
  1. Dept. of Reactor Dynamics and Reactor Safety, Technical Univ. Munich, Walther Meissner-Str. 2, 85748 Garching (Germany)
  2. ISaR Inst. for Safety and Reliability, Walther Meissner-Str. 2, 85748 Garching (Germany)

In conventional pressurized water reactor (PWR) designs, soluble boron is used for reactivity control over core fuel cycle. As an inadvertent reduction of the boron concentration during a boron dilution accident could introduce positive reactivity and have a negative impact on PWR safety, design changes to reduce boron concentration in the reactor coolant are of general interest. In the framework of an investigation into the feasibility of low boron design, a PWR core configuration based on fuel with higher gadolinium (Gd) load has been developed which permits to reduce the natural boron concentration at begin of cycle (BOC) to 518 ppm. For the assessment of the potential safety advantages, a boron dilution accident due to small break loss-of-coolant-accident (SBLOCA) has been simulated with the system code ATHLET for two PWR core designs: a low boron design and a standard core design. The results from the comparative analyses showed that the impact of the boron dilution accident on the new PWR design safety is significantly lower in comparison with the standard design. The new reactor design provided at least 4, 4% higher reactivity margin to recriticality during the whole accident which is equivalent to the negative reactivity worth of additional 63% of all control rods fully inserted in to the core. (authors)

Research Organization:
American Nuclear Society, 555 North Kensington Avenue, La Grange Park, IL 60526 (United States)
OSTI ID:
22039660
Resource Relation:
Conference: PHYSOR-2006: American Nuclear Society's Topical Meeting on Reactor Physics - Advances in Nuclear Analysis and Simulation, Vancouver, BC (Canada), 10-14 Sep 2006; Other Information: Country of input: France; 7 refs.
Country of Publication:
United States
Language:
English