Design Features and Initial RF Performance of a Gradient Hardened 17 GHz TW Linac Structure
- Haimson Research Corporation 3350 Scott Blvd., Building 60, Santa Clara, CA 95054-3104 (United States)
To avoid surface erosion damage and to assist in studying RF breakdown thresholds in 17 GHz TW linac structures, a gradient hardened structure has been fabricated with high temperature brazed and machined stainless steel surfaces located in the peak E-field region of the beam apertures and the peak H-field regions of the input coupler cavity. The microwave design parameters and physical dimensions of this 22 cavity, 120 degree phase advance structure were chosen to allow the high gradient performance to be compared against a similar design all-copper structure that has been tested in a dual ring, power recirculating amplifier system. The final design parameters of the gradient hardened structure are discussed; the influence of stainless steel RF losses on the power buildup of the resonant ring and on the structure gradient distribution are described; waveforms are shown of the unique ability of the power amplifier to rapidly quench RF breakdown discharges in the linac structure by automatically sensing and redirecting the RF source power to a matched load; and preliminary test results during high power RF processing of the gradient hardened linac structure are presented.
- OSTI ID:
- 21255265
- Journal Information:
- AIP Conference Proceedings, Vol. 1086, Issue 1; Conference: 13. advanced accelerator concepts workshop, Santa Cruz, CA (United States), 27 Jul - 2 Aug 2008; Other Information: DOI: 10.1063/1.3080951; (c) 2009 American Institute of Physics; Country of input: International Atomic Energy Agency (IAEA); ISSN 0094-243X
- Country of Publication:
- United States
- Language:
- English
Similar Records
High-gradient rf tests of welded -band accelerating cavities
A racetrack geometry to avoid undesirable azimuthal variations of the electric field gradient in high power coupling cavities for TW structures