Effect of additives on the reduction of PM2.5 emissions during pulverized coal combustion
- Chubu University, Aichi (Japan). Department of Applied Chemistry
Two bituminous coals used in coal-fired power plants were mixed with either Ca- or Mg-based chemical additives. Coals and the mixtures were burnt in a laboratory-scale drop tube furnace, respectively. The impact of the additives on the transformations of coal minerals, as well as on the emissions of particulate matter with an aerodynamic diameter smaller than 2.5 {mu}m (PM2.5), was investigated. The generated ash particles were collected using a cyclone combined with a low-pressure impactor. The physical and chemical properties of these ash particles were analyzed. The results indicate that the addition of chemical additives can affect the mineral transformation process, and thus, control the emissions of PM2.5 and PM1 during combustion. In particular, additives have a considerable impact on the particle size distribution and chemical composition of PM, wherein it improves the degree of coalescence of submicron and fine mineral particles, which reduces PM2.5 emissions. The effects of additive on the reduction of PM2.5 emissions depend on the type of coals being used. 17 refs., 8 figs., 3 tabs.
- OSTI ID:
- 21233730
- Journal Information:
- Energy and Fuels, Vol. 23, Issue 7; ISSN 0887-0624
- Country of Publication:
- United States
- Language:
- English
Similar Records
Suppression of fine ash formation in pulverized coal flames. Quarterly technical progress report No. 4, July 1, 1993--September 30, 1993
Experimental evaluation of process parameters influencing ash deposition in pulverized coal-fired utility boilers and gas turbines