skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Phased Implementation of In Situ Chemical Oxidation for a Large TCE DNAPL Source Area at the Portsmouth Gaseous Diffusion Plant, USA

Conference ·
OSTI ID:21156373
 [1]
  1. Del Baird CDM, 3930 US Rt. 23, Piketon, OH 45661-2465 (United States)

This paper describes the In Situ Chemical Oxidation (ISCO) remediation being implemented for the X-701B groundwater plume at the Department of Energy (DOE) Portsmouth Gaseous Diffusion Plant (PORTS). Modified Fenton's reagent is the principal oxidant for the remedy, and Direct Push Technology (DPT) is being used for delivery of the oxidant. Trichloroethene (TCE) is the primary contaminant of concern and is present within the unit as a dense non - aqueous phase liquid (DNAPL). A phased approach is being implemented to optimize the type, location, and mass of the oxidant injections. During Phase I, a unique near-real time monitoring approach was utilized to observe the transient effects of the oxidant injections on the formation. As a result of the positive results from Phase I, Ohio EPA has approved the final work plan for the remedy, and the approach is now being applied to the source area of the plume. The results from Phase I and the layout for the first series of Phase II injections are presented in this paper. Previous testing at the site has shown that the shallow, water-bearing formation is primarily composed of silty gravel and clay, and is both heterogeneous and anisotropic. These factors have significantly compromised earlier attempts to remediate the unit. A patented ISCO process from In-Situ Oxidative Technologies, Inc. (ISOTEC) was selected for the remediation of the plume. Phase I results indicate that oxidant delivery via DPT is feasible for the unit. Contaminant reduction to date has been minimal due to the small quantity of oxidant injected during Phase I. Contaminant rebound in the aqueous phase remains a concern and will be monitored closely during the remedy. (author)

Research Organization:
American Society of Mechanical Engineers (ASME), Three Park Avenue, New York, NY 10016-5990 (United States); Technological Institute of the Royal Flemish Society of Engineers (TI-K VIV), Het Ingenieurshuis, Desguinlei 214, 2018 Antwerp (Belgium); Belgian Nuclear Society (BNS) - ASBL-VZW, c/o SCK-CEN, Avenue Hermann Debrouxlaan, 40 - B-1160 Brussels (Belgium)
OSTI ID:
21156373
Resource Relation:
Conference: ICEM'07: 11. International Conference on Environmental Remediation and Radioactive Waste Management, Bruges (Belgium), 2-6 Sep 2007; Other Information: Country of input: France; Proceedings may be ordered from ASME Order Department, 22 Law Drive, P.O. Box 2300, Fairfield, NJ 07007-2300 (United States)
Country of Publication:
United States
Language:
English