Examination of the solidification macrostructure of spheroidal and flake graphite cast irons using DAAS and ESBD
- Metallurgy Division INTEMA, National University of Mar del Plata, CONICET, J. B. Justo 4302 (B7608FDQ) Mar del Plata (Argentina)
- Department of Metallurgy and Materials Science, Ghent University (Belgium)
This investigation focuses on the study of the solidification macrostructure of sand cast flake and spheroidal graphite cast irons. The macrostructure is revealed by using a special technique developed earlier by the authors, called Direct Austempering After Solidification. The observations make use of conventional metallography and Electron Back Scattering Diffraction. The latter technique allows a more detailed observation of the morphology of the austenite grains and the microstructure of the matrix. The results of Electron Back Scattering Diffraction validate the observations made using the macrographic technique. It is verified that the solidification of both flake and spheroidal graphite cast irons is dominated by the growth of large austenite dendrites that form a grain pattern similar to that usually found in most metallic alloys.
- OSTI ID:
- 21140776
- Journal Information:
- Materials Characterization, Vol. 59, Issue 9; Other Information: DOI: 10.1016/j.matchar.2007.11.009; PII: S1044-5803(07)00399-3; Copyright (c) 2007 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved; Country of input: International Atomic Energy Agency (IAEA); ISSN 1044-5803
- Country of Publication:
- United States
- Language:
- English
Similar Records
Influence of gravity acceleration on macrosegregation and macrostructure during the unidirectional solidification of cast binary alloys: A numerical investigation
Solidification of spheroidal graphite cast irons. 1: Physical modeling