Effect of scandium on the microstructure and ageing behaviour of cast Al-6Mg alloy
- Bangladesh University of Engineering and Technology, Dhaka-1000 (Bangladesh)
- Bengal Engineering and Science University, Shibpur, Howrah 711 103 (India)
- National Institute of Foundry and Forge Technology, Ranchi 834003 (India)
Microstructural modification and grain refinement due to addition of scandium in Al-6Mg alloy has been studied. Transmission electron microscopy is used to understand the microstructure and precipitation behaviour in Al-6Mg alloy doped with scandium. It is seen from the microstructure that the dendrites of the cast Al-6Mg alloy have been refined significantly due to addition of scandium. Increasing amount of scandium leads to a greater dendrite refinement. The age hardening effect in scandium added Al-6Mg alloys has been studied by subjecting the alloys containing varying amount of scandium ranging from 0.2 wt.% to 0.6 wt.% to isochronal and isothermal ageing at various temperatures for different times. It is observed that significant hardening takes place in the aged alloys due to the precipitation of scandium aluminides.
- OSTI ID:
- 21137485
- Journal Information:
- Materials Characterization, Vol. 59, Issue 11; Other Information: DOI: 10.1016/j.matchar.2008.03.006; PII: S1044-5803(08)00100-9; Copyright (c) 2008 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved; Country of input: International Atomic Energy Agency (IAEA); ISSN 1044-5803
- Country of Publication:
- United States
- Language:
- English
Similar Records
Analyzing the microstructural evolution and hardening response of an Al-Si-Mg casting alloy with Cr addition
Effect of as-cast microstructure heterogeneity on aging behavior of a high-pressure die-cast A380 alloy