Preliminary results of the ion extraction simulations applied to the MONO1000 and SUPERSHyPIE electron cyclotron resonance ion sources
- CIRIL, avenue Henri Becquerel, BP 5133, F-14070 Caen cedex 05 (France)
The goal of this article is to present simulations on the extraction from an electron cyclotron resonance ion source (ECRIS). The aim of this work is to find out an extraction system, which allows one to reduce the emittances and to increase the current of the extracted ion beam at the focal point of the analyzing dipole. But first, we should locate the correct software which is able to reproduce the specific physics of an ion beam. To perform the simulations, the following softwares have been tested: SIMION 3D, AXCEL, CPO 3D, and especially, for the magnetic field calculation, MATHEMATICA coupled with the RADIA module. Emittance calculations have been done with two types of ECRIS: one with a hexapole and one without a hexapole, and the difference will be discussed.
- OSTI ID:
- 21103988
- Journal Information:
- Review of Scientific Instruments, Vol. 79, Issue 2; Conference: ICIS 2007: 12. international conference on ion sources, Jeju (Korea, Republic of), 26-31 Aug 2007; Other Information: DOI: 10.1063/1.2814260; (c) 2008 American Institute of Physics; Country of input: International Atomic Energy Agency (IAEA); ISSN 0034-6748
- Country of Publication:
- United States
- Language:
- English
Similar Records
Prospects of ion beam extraction and transport simulations (invited)
Study of ion beam extraction and transport from an electron cyclotron resonance ion source