skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Parametric study on the CO{sub 2} capture capacity of CaO-based sorbents in looping cycles

Journal Article · · Energy and Fuels
DOI:https://doi.org/10.1021/ef800011z· OSTI ID:21073653
;  [1]
  1. CANMET Energy Technology Centre-Ottawa, Ottawa, ON (Canada)

An experimental parametric study on the CO{sub 2} capture activity of four limestone-derived CaO-based sorbents was performed. Experiments were done in a thermogravimetric analyzer (TGA) at temperatures ranging from 650 to 850{sup o}C. Three particle-size fractions of Kelly Rock limestone and powders obtained by their grinding were also tested, while the influence of carbonation and calcination durations was examined at 750 and 850{sup o}C. The results indicated that increasing the calcination/carbonation temperature had a negative influence on the sorbent activity, while the influence of particle size was small, although larger particles have higher activity. This was unexpected, but it can be explained by the higher content of impurities in the smaller particles. Grinding enhances sorbent activity, and this appears to be more than simply due to increased external surface area of the sorbent particles in the powdered samples. Prolonged carbonation time has a negative effect on the sorbent performance. The formation and decomposition of CaCO{sub 3} as well as its presence on the sorbent surface at higher temperatures appear to be key factors in the loss of surface area (i.e., decrease in sorbent activity). However, it is shown that the prolonged exposure to calcination conditions employed in this work (inert atmosphere) has a slightly beneficial effect on sorbent behavior as a function of the number of calcination/carbonation cycles. Experiments with larger sample masses typically resulted in better conversions. Analysis of scanning electron microscope (SEM) images of spent sorbent particles obtained from different reactor types indicated that thermal stresses are the main cause for sorbent particle fracture and attrition. 36 refs., 10 figs.

OSTI ID:
21073653
Journal Information:
Energy and Fuels, Vol. 22, Issue 3; Other Information: banthony@nrcan.gc.ca; ISSN 0887-0624
Country of Publication:
United States
Language:
English

Similar Records

SO{sub 2} Retention by CaO-Based Sorbent Spent in CO{sub 2} Looping Cycles
Journal Article · Wed Jul 15 00:00:00 EDT 2009 · Industrial and Engineering Chemistry Research · OSTI ID:21073653

SO{sub 2} retention by reactivated CaO-based sorbent from multiple CO{sub 2} capture cycles
Journal Article · Fri Jun 15 00:00:00 EDT 2007 · Environmental Science and Technology · OSTI ID:21073653

Sintering and reactivity of CaCO{sub 3}-based sorbents for in situ CO{sub 2} capture in fluidized beds under realistic calcination conditions
Journal Article · Mon Jun 15 00:00:00 EDT 2009 · Journal of Environmental Engineering (New York) · OSTI ID:21073653