Ion orbits in plasma etching of semiconductors
- Electrical Engineering Department, University of California, Los Angeles, California 90095-1594 (United States)
Fabrication of high-speed semiconductor circuits depends on etching submicron trenches and holes with straight walls, guided by sheath accelerated ions, which strike the substrate at a normal angle. Electrons accumulate at the nonconductive entrance of each trench, charging it negatively and preventing the penetration of electrons to the bottom of the trench. This 'electron shading' effect causes an ion charge at the bottom, which is well known to cause damage to thin oxide layers. In addition, the deflection of ions by electric fields in the trench can cause deformation of the trench shape. To study this effect, the ion orbits are computed self-consistently with their charging of the trench walls. It is found that (a) the orbits depend only on the electric fields at the entrance and are sensitive to changes in the shape of the photoresist layer there; (b) there is an 'ion shading' effect that protects part of the wall; and (c) the number of ions striking the wall is too small to cause any deformation thereof.
- OSTI ID:
- 21069986
- Journal Information:
- Physics of Plasmas, Vol. 15, Issue 1; Other Information: DOI: 10.1063/1.2819681; (c) 2008 American Institute of Physics; Country of input: International Atomic Energy Agency (IAEA); ISSN 1070-664X
- Country of Publication:
- United States
- Language:
- English
Similar Records
Dependence on ion temperature of shallow-angle magnetic presheaths with adiabatic electrons
SECONDARY ELECTRON TRAJECTORIES IN HIGH-GRADIENT VACUUM INSULATORS WITH FAST HIGH-VOLTAGE PULSES