High Velocity Forming of Magnesium and Titanium Sheets
- Technical Research Centre of Finland, P.O. Box 1000, 02044 VTT (Finland)
- Helsinki University of Technology, P.O. Box 6200, 02015 HUT (Finland)
Cold forming of magnesium and titanium is difficult due to their hexagonal crystal structure and limited number of available slip systems. However, high velocity deformation can be quite effective in increasing the forming limits. In this study, electromagnetic forming (EMF) of thin AZ31B-O magnesium and CP grade 1 titanium sheets were compared with normal deep drawing. Same dies were used in both forming processes. Finite element (FE) simulations were carried out to improve the EMF process parameters. Constitutive data was determined using Split Hopkinson Pressure Bar tests (SHPB). To study formability, sample sheets were electromagnetically launched to the female die, using a flat spiral electromagnetic coil and aluminum driver sheets. Deep drawing tests were made by a laboratory press-machine.Results show that high velocity forming processes increase the formability of Magnesium and Titanium sheets although process parameters have to be carefully tuned to obtain good results.
- OSTI ID:
- 21057003
- Journal Information:
- AIP Conference Proceedings, Vol. 907, Issue 1; Conference: 10. ESAFORM conference on material forming, Zaragoza (Spain), 18-20 Apr 2007; Other Information: DOI: 10.1063/1.2729504; (c) 2007 American Institute of Physics; Country of input: International Atomic Energy Agency (IAEA); ISSN 0094-243X
- Country of Publication:
- United States
- Language:
- English
Similar Records
Characterization and formability of continuous-cast AZ31B magnesium alloy sheets
Warm Deep Drawing Of Rectangular Cups With Magnesium Alloy AZ31 Sheets