Centrifugal Casting Features/Metallurgical Characterization of Aluminum Alloys
- Mechanical Engineering Department, School of Engineering, Minho University (Portugal)
- Faculty of Mechanical Engineering, Dunarea de Jos University Galati (Romania)
This paper deals with the study of centrifugal effects on aluminium castings under high G values. Most of the studies in this domain (FGMs obtained by centrifugal casting) deal with functionally graded composites reinforced with a solid phase such as silicon particles or others. However, in this study it will be shown that unreinforced aluminium alloys may be significantly influenced by the centrifugal effect and that functionally graded castings are also obtained. It has been observed that the centrifugal effect may increase in some alloys, depending on the relative position in the castings, the rupture strength by approx. 50%, and rupture strain by about 300%, as compared to the gravity casting technique. The Young's modulus may also increase by about 20%. It has also been reported that in vertical centrifugal castings there are mainly three aspects that affect the components thus obtained, namely: fluid dynamics; vibration (inherent to the system); and centrifugal force. These features have a different effect on the castings depending on the aluminium alloy. In this paper, an analysis of the most important effects of the centrifugal casting process on metallurgical features is conducted. A solidification characterization at several points along the mould will be made in order to have an accurate idea of both the fluid dynamics inside the mould during the casting and the solidification behavior in different parts of the component. These two analyses will be related to the metallurgical properties (phase distribution; SDAS; eutectic silicon content and shape, pores density and shape) along the component and mainly along the direction of the centrifugal pressure. A comparison between castings obtained by both centrifugal casting technique and gravity casting technique is made for reference (gravity casting)
- OSTI ID:
- 21055271
- Journal Information:
- AIP Conference Proceedings, Vol. 973, Issue 1; Conference: M and FGM 2006: Conference on multiscale and funtionally graded materials 2006, Oahu Island, HI (United States), 15-18 Oct 2006; Other Information: DOI: 10.1063/1.2896847; (c) 2008 American Institute of Physics; Country of input: International Atomic Energy Agency (IAEA); ISSN 0094-243X
- Country of Publication:
- United States
- Language:
- English
Similar Records
Integrated numerical modeling of the complete casting process
Applying inverse technique for identification of thermal resistance between cast and mould during permanent casting of metals