Pressure Distribution for TPS Storage Ring
- National Synchrotron Radiation Research Center, Hsinchu 30076, Taiwan (China)
The design of the vacuum system at the 3 GeV Taiwan Photon Source (TPS) is described. A localized pumping configuration of the bending chambers (B-chamber) and the injection section of the storage ring is adopted to confine and evacuate the photon-stimulated desorption from the absorbers induced by synchrotron light. The photon absorbers are carefully designed to reduce the photoelectron yield and to protect the downstream components. Non-evaporable getter (NEG) strips are installed inside the insertion device chambers (ID-chamber) to increase the linear pumping speed to solve the conductance-limit problem. Monte Carlo and iterative simulation programs are utilized to calculate the pressure profiles in both the bending section and the straight section to optimize the location of the vacuum pumps. The simulation results show that the pressure satisfies the requirement (< 1 x 10-9 torr) for a 10-hour beam lifetime at 3 GeV, 400 mA after a conditioning time of 100 Ah.
- OSTI ID:
- 21052546
- Journal Information:
- AIP Conference Proceedings, Vol. 879, Issue 1; Conference: 9. international conference on synchrotron radiation instrumentation, Daegu (Korea, Republic of), 28 May - 2 Jun 2006; Other Information: DOI: 10.1063/1.2436001; (c) 2007 American Institute of Physics; Country of input: International Atomic Energy Agency (IAEA); ISSN 0094-243X
- Country of Publication:
- United States
- Language:
- English
Similar Records
Design of the Aluminum Vacuum Chambers for the 3 GeV TPS Electron Storage Ring
Distributed ion pump testing for PEP II, asymmetric B-Factory collider