Preparation and properties of dough-modeling compound/fly ash/reclaim powder composites

Journal Article · Sat Dec 15 00:00:00 EST 2007 · Journal of Applied Polymer Science

DOI:https://doi.org/10.1002/app.27071· OSTI ID:20978305

Wu, W L ^[1]

---

1. Qiqihar University, Qiqihar (China)

A novel composite was prepared with reclaim powder (RP) matrix, dough-modeling compound (DMC) reinforcement and fly ash (FA) filler in this article. The compatibility and crosslinking construction of the FA/RP composites were respectively, studied by the polarizing microscope and IR, the optimal formulation and experimental process were determined by measuring the mechanical properties such as shore A hardness, tensile strength, elongation at break, wear resistance and the thermal stability. The results showed that DMC/FA/RP composites exhibited extremely high mechanical and thermal properties when the mass ratio of the DMC/FA/RP composites was 45/25/100, and the cure condition is at 145 {sup o}C for 30 min under 9 MPa.

• OSTI ID: 20978305
• Journal Information: Journal of Applied Polymer Science, Vol. 106, Issue 6; ISSN 0021-8995
• Country of Publication: United States
• Language: English

Related Subjects

01 COAL, LIGNITE, AND PEAT
FLY ASH
WASTE PRODUCT UTILIZATION
FILLERS
COMPOSITE MATERIALS
CROSS-LINKING
MECHANICAL PROPERTIES
RUBBERS