Enhancement of mechanical strength of TiO{sub 2}/high-density polyethylene composites for bone repair with silane-coupling treatment
- Japan Fine Ceramics Center, 2-4-1 Mutsuno, Atsuta-ku, Nagoya 456-8587 (Japan)
- Research Institute for Science and Technology, Chubu University, 1200 Matsumoto-cho, Kasugai 487-8501 (Japan)
Mechanical properties of composites made up of high-density polyethylene (HDPE) and silanated TiO{sub 2} particles for use as a bone-repairing material were investigated in comparison with those of the composites of HDPE with unsilanized TiO{sub 2} particles. The interfacial morphology and interaction between silanated TiO{sub 2} and HDPE were analyzed by means of Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM). The absorption in spectral bands related to the carboxyl bond in the silane-coupling agent, the vinyl group in the HDPE, and the formation of the ether bond was studied in order to assess the influence of the silane-coupling agent. The SEM micrograph showed that the 'bridging effect' between HDPE and TiO{sub 2} was brought about by the silane-coupling agent. The use of the silane-coupling agent and the increase of the hot-pressing pressure for shaping the composites facilitated the penetration of polymer into cavities between individual TiO{sub 2} particles, which increased the density of the composite. Therefore, mechanical properties such as bending yield strength and Young's modulus increased from 49 MPa and 7.5 GPa to 65 MPa and 10 GPa, respectively, after the silane-coupling treatment and increase in the hot-pressing pressure.
- OSTI ID:
- 20891637
- Journal Information:
- Materials Research Bulletin, Vol. 41, Issue 3; Other Information: DOI: 10.1016/j.materresbull.2005.09.014; PII: S0025-5408(05)00352-1; Copyright (c) 2005 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved; Country of input: International Atomic Energy Agency (IAEA); ISSN 0025-5408
- Country of Publication:
- United States
- Language:
- English
Similar Records
Pressure filtration of AlN-TiO{sub 2} slurries for the production of reaction hot-pressed Al{sub 2}O{sub 3}/TiN composites
Interaction of silane coupling agents with the TiO{sub 2}(110) surface