Gas and Pellet Injection Systems for JT-60 and JT-60U
- Japan Atomic Energy Research Institute (Japan)
Designs and operations of the gas system and pellet injection systems for JT-60 and JT-60U are described. A gas injection valve that is a key component of the gas injection system was developed using a multilayer piezoelectric element. The maximum flow rate of this system is 43.3 Pa.m{sup 3}/s. The valve has mechanism for adjustment at atmospheric side meaning that a repair and an adjustment can be conducted without ventilation inside a vacuum vessel. It was confirmed that the effect of magnetic field and temperature change on the valves in the JT-60U environment was negligible.In JT-60U, two systems of pellet injector - a pneumatic drive and a centrifugal one - were developed. The pneumatic type attained a pellet velocity of 2.3 km/s, which was the world record at the time in 1988. On the other hand, the centrifugal one was developed in 1998. This injector can eject trains of up to 40 cubic (2.1 mm{sup 3}) pellets at frequencies of 1 to 10 Hz and speed of 0.1 to 1.0 km/s. A guide tube for a magnetic high field side injection (HFS) (top) was also developed in 1999. The pellet injection experiment with the HFS system started in 2000. In addition, another guide tube for HFS(mid) injection was newly developed and installed in March 2001. These systems are working well.
- OSTI ID:
- 20845860
- Journal Information:
- Fusion Science and Technology, Vol. 42, Issue 2,3; Other Information: Copyright (c) 2006 American Nuclear Society (ANS), United States, All rights reserved. http://epubs.ans.org/; Country of input: International Atomic Energy Agency (IAEA); ISSN 1536-1055
- Country of Publication:
- United States
- Language:
- English
Similar Records
Recent advances in fueling magnetically confined plasmas with pellets
Operation of a repeating pneumatic hydrogen pellet injector on the Tokamak Fusion Test Reactor