skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Rate of reduction of ore-carbon composites: Part II. Modeling of reduction in extended composites

Abstract

A new process for ironmaking was proposed using a rotary hearth furnace and an iron bath smelter to produce iron employing wood charcoal as an energy source and reductant. This paper examines reactions in composite pellet samples with sizes close to sizes used in industrial practice (10 to 16 min in diameter). A model was constructed using the combined kinetic mechanism developed in Part I of this series of articles along with equations for the computation of pellet temperature and shrinkage during the reaction. The analysis of reaction rates measured for pellets with wood charcoal showed that heat transfer plays a significant role in their overall rate of reaction at elevated temperatures. The slower rates measured in pellets containing coal char show that the intrinsic kinetics of carbon oxidation is more significant than heat transfer. Model calculations suggest that the rates are highly sensitive to the thermal conductivity of pellets containing wood charcoal and are less sensitive to the external conditions of heat transfer. It was seen that the changes in pellet surface area and diameter due to shrinkage introduce little change on reaction rates. The model developed provides an adequate description of pellets of wood charcoal up to circamore » 90% of reduction. Experimentally determined rates of reduction of iron oxide by wood charcoal were approximately 5 to 10 times faster than rates measured in pellets with coal char.« less

Authors:
;  [1]
  1. US Steel Research & Technological Center, Monroeville, PA (United States)
Publication Date:
OSTI Identifier:
20700966
Resource Type:
Journal Article
Journal Name:
Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science
Additional Journal Information:
Journal Volume: 36; Journal Issue: 6; Journal ID: ISSN 1073-5615
Country of Publication:
United States
Language:
English
Subject:
01 COAL, LIGNITE, AND PEAT; 09 BIOMASS FUELS; FURNACES; ROTATION; IRON ORES; SMELTERS; CARBON; CHARCOAL; COAL; CHARS; REACTION KINETICS; REDUCING AGENTS; MIXTURES; PELLETS; HEAT TRANSFER; OXIDATION; REDUCTION; IRON; THERMAL CONDUCTIVITY

Citation Formats

Fortini, O M, and Fruehan, R J. Rate of reduction of ore-carbon composites: Part II. Modeling of reduction in extended composites. United States: N. p., 2005. Web. doi:10.1007/s11663-005-0074-4.
Fortini, O M, & Fruehan, R J. Rate of reduction of ore-carbon composites: Part II. Modeling of reduction in extended composites. United States. https://doi.org/10.1007/s11663-005-0074-4
Fortini, O M, and Fruehan, R J. 2005. "Rate of reduction of ore-carbon composites: Part II. Modeling of reduction in extended composites". United States. https://doi.org/10.1007/s11663-005-0074-4.
@article{osti_20700966,
title = {Rate of reduction of ore-carbon composites: Part II. Modeling of reduction in extended composites},
author = {Fortini, O M and Fruehan, R J},
abstractNote = {A new process for ironmaking was proposed using a rotary hearth furnace and an iron bath smelter to produce iron employing wood charcoal as an energy source and reductant. This paper examines reactions in composite pellet samples with sizes close to sizes used in industrial practice (10 to 16 min in diameter). A model was constructed using the combined kinetic mechanism developed in Part I of this series of articles along with equations for the computation of pellet temperature and shrinkage during the reaction. The analysis of reaction rates measured for pellets with wood charcoal showed that heat transfer plays a significant role in their overall rate of reaction at elevated temperatures. The slower rates measured in pellets containing coal char show that the intrinsic kinetics of carbon oxidation is more significant than heat transfer. Model calculations suggest that the rates are highly sensitive to the thermal conductivity of pellets containing wood charcoal and are less sensitive to the external conditions of heat transfer. It was seen that the changes in pellet surface area and diameter due to shrinkage introduce little change on reaction rates. The model developed provides an adequate description of pellets of wood charcoal up to circa 90% of reduction. Experimentally determined rates of reduction of iron oxide by wood charcoal were approximately 5 to 10 times faster than rates measured in pellets with coal char.},
doi = {10.1007/s11663-005-0074-4},
url = {https://www.osti.gov/biblio/20700966}, journal = {Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science},
issn = {1073-5615},
number = 6,
volume = 36,
place = {United States},
year = {Thu Dec 01 00:00:00 EST 2005},
month = {Thu Dec 01 00:00:00 EST 2005}
}