Corrosion behavior and tensile properties of AISI 316LN stainless steel exposed to flowing sodium at 823 K
Austenitic stainless steel of the grade AISI 316 LN was exposed to flowing sodium in a loop at 823 K for 6,000 h to examine the corrosion and mass-transfer behavior. The specimens were incorporated in specially designed sample holders in the loop. These were retrieved and examined by various metallurgical techniques. Specimens were also subjected to thermal aging in the same sample holder to aid in separating the consequences of exposure to sodium from those cause by mere thermal effects. Microstructural investigations have revealed that thermal aging caused the precipitation of carbides at the grain boundaries. Exposure to sodium caused the leaching of elements such as chromium and nickel from the specimen. Loss of nickel from the austenite phase promoted the generation of ferrite phase. Microhardness investigation revealed the hardening of the sodium-exposed surface. Analysis using an electron Probe Microanalyzer revealed that the surface of the steel was both carburized and nitrided. Tensile tests indicated that there is no appreciable difference in the yield strength (YS) and ultimate tensile strength (UTS) of the thermally aged and sodium-exposed specimens when compared with the material in the as-received condition. However, the thermally aged and sodium-exposed specimens showed a decrease in the uniform elongation and total elongation at rupture, perhaps due to carburization and nitridation.
- Research Organization:
- Indira Gandhi Centre for Atomic Research, Tamil Nadu (IN)
- OSTI ID:
- 20023163
- Journal Information:
- Journal of Materials Engineering and Performance, Vol. 9, Issue 1; Other Information: PBD: Feb 2000; ISSN 1059-9495
- Country of Publication:
- United States
- Language:
- English
Similar Records
Report on sodium compatibility of advanced structural materials.
Decarburization and Carburization Behavior of Grade 91 Steel in Sodium Environments