Heater effects on cyclone performance for the separation of solids from high temperature and pressure effluents
A 25.4-mm diameter hydrocyclone with an underflow receiver was evaluated for its ability to achieve separation of fine particles from water at elevated temperatures and pressures relevant to supercritical oxidation. Temperature was varied from 25 C to 340 C, while pressure was maintained at 27.6 MPa. The particles studied were {alpha}-alumina. Particle-removal efficiency was affected by the separation capabilities of the hydrocyclone, deposition on the heater surface, and flocculation of the particles. Particle-size distributions and suspended solids analyses confirmed that cyclone, separation efficiency was controlled by the (density{sub particle}--density{sub water})/viscosity{sub water} ratio. Because this ratio is sensitive to temperature, especially in the neighborhood of the supercritical point, separation efficiencies sharply increased with temperature. Contrary to traditional air cyclone theory, removal efficiency was inversely correlated to flow rate. This result was caused by particle deposition and particle flocculation in the heater. Low flow rates increased heater detention times and, thus, opportunities for flocculation and particle deposition. Therefore, the performance of a hydrocyclone used in conjunction with supercritical oxidation depends on phenomena occurring in the heater and the hydrocyclone.
- Research Organization:
- Northwestern Univ., Evanston, IL (US)
- OSTI ID:
- 20017409
- Journal Information:
- Separation Science and Technology, Vol. 34, Issue 15; Other Information: PBD: Nov 1999; ISSN 0149-6395
- Country of Publication:
- United States
- Language:
- English
Similar Records
The separation of particles from supercritical water oxidation effluents
The separation of particulates from supercritical water oxidation processes