The pixel tracking telescope at the Fermilab Test Beam Facility
- Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States)
- Istituto Nazionale di Fisica Nucleare (INFN), Milano (Italy). Sezione di Milano Bicocca and Univ. degli Studi di Milano Bicocca
An all silicon pixel telescope has been assembled and used at the Fermilab Test Beam Facility (FTBF) since 2009 to provide precise tracking information for different test beam experiments with a wide range of Detectors Under Test (DUTs) requiring high resolution measurement of the track impact point. The telescope is based on CMS pixel modules left over from the CMS forward pixel production. Eight planes are arranged to achieve a resolution of less than 8 μm on the 120 GeV proton beam transverse coordinate at the DUT position. In order to achieve such resolution with 100 × 150 μm2 pixel cells, the planes were tilted to 25 degrees to maximize charge sharing between pixels. Crucial for obtaining this performance is the alignment software, called Monicelli, specifically designed and optimized for this system. This paper will describe the telescope hardware, the data acquisition system and the alignment software constituting this particle tracking system for test beam users.
- Research Organization:
- Fermi National Accelerator Laboratory (FNAL), Batavia, IL (United States)
- Sponsoring Organization:
- USDOE Office of Science (SC), High Energy Physics (HEP)
- Grant/Contract Number:
- AC02-07CH11359
- OSTI ID:
- 1226342
- Alternate ID(s):
- OSTI ID: 1251774
- Report Number(s):
- FERMILAB-PUB-14-212-CD
- Journal Information:
- Nuclear Instruments and Methods in Physics Research. Section A, Accelerators, Spectrometers, Detectors and Associated Equipment, Vol. 811, Issue C; ISSN 0168-9002
- Publisher:
- ElsevierCopyright Statement
- Country of Publication:
- United States
- Language:
- English
Web of Science
An EUDET/AIDA Pixel Beam Telescope for Detector Development
|
journal | January 2012 |
Design and performance of the CMS pixel detector readout chip
|
journal | September 2006 |
CAPTAN: A hardware architecture for integrated data acquisition, control, and analysis for detector development
|
conference | October 2008 |
A software solution for the control, acquisition, and storage of CAPTAN network topologies
|
conference | October 2008 |
Laboratory and testbeam results for thin and epitaxial planar sensors for HL-LHC
|
journal | August 2015 |
Testbeam and laboratory characterization of CMS 3D pixel sensors
|
journal | July 2014 |
Pre- and post-irradiation performance of FBK 3D silicon pixel detectors for CMS
|
journal | November 2014 |
Performance of CMS 3D silicon pixel detectors before and after irradiation
|
journal | December 2013 |
3D-FBK pixel sensors with CMS readout: First test results
|
journal | August 2013 |
Test-beam studies of diamond sensors for SLHC
|
journal | August 2013 |
Similar Records
Performance Before and After Irradiation of Pixelated 3D Silicon Sensors for the HL-LHC CMS Tracker
Tracking performance of a single-crystal and a polycrystalline diamond pixel-detector