Microscale Enhancement of Heat and Mass Transfer for Hydrogen Energy Storage

Drost, Kevin; Jovanovic, Goran; Paul, Brian

doi:10.2172/1225296

Title: Microscale Enhancement of Heat and Mass Transfer for Hydrogen Energy Storage

Full Record
Other Related Research

Abstract

The document summarized the technical progress associated with OSU’s involvement in the Hydrogen Storage Engineering Center of Excellence. OSU focused on the development of microscale enhancement technologies for improving heat and mass transfer in automotive hydrogen storage systems. OSU’s key contributions included the development of an extremely compact microchannel combustion system for discharging hydrogen storage systems and a thermal management system for adsorption based hydrogen storage using microchannel cooling (the Modular Adsorption Tank Insert or MATI).

Authors:

Drost, Kevin ^[1]; Jovanovic, Goran ^[1]; Paul, Brian ^[1]

Oregon State Univ., Corvallis, OR (United States)

Publication Date:: Wed Sep 30 00:00:00 EDT 2015

Research Org.:: Oregon State Univ., Corvallis, OR (United States)

Sponsoring Org.:: USDOE Office of Energy Efficiency and Renewable Energy (EERE), Sustainable Transportation Office. Hydrogen Fuel Cell Technologies Office

OSTI Identifier:: 1225296

Report Number(s):: 1

DOE Contract Number:: FC36-09GO19005

Resource Type:: Technical Report

Country of Publication:: United States

Language:: English

Subject:: 08 HYDROGEN; hydrogen, storage, automotive, MATI, heat exchanger, adsorbent, microchannel

Citation Formats


                    Drost, Kevin, Jovanovic, Goran, and Paul, Brian. Microscale Enhancement of Heat and Mass Transfer for Hydrogen Energy Storage.  United States: N. p., 2015. 
        Web.  doi:10.2172/1225296.

Copy to clipboard


                    Drost, Kevin, Jovanovic, Goran, & Paul, Brian. Microscale Enhancement of Heat and Mass Transfer for Hydrogen Energy Storage.  United States.  https://doi.org/10.2172/1225296

Copy to clipboard


                    Drost, Kevin, Jovanovic, Goran, and Paul, Brian. 2015.  
        "Microscale Enhancement of Heat and Mass Transfer for Hydrogen Energy Storage".  United States.  https://doi.org/10.2172/1225296.  https://www.osti.gov/servlets/purl/1225296.

Copy to clipboard


                    
@article{osti_1225296,

  title        = {Microscale Enhancement of Heat and Mass Transfer for Hydrogen Energy Storage},

  author       = {Drost, Kevin and Jovanovic, Goran and Paul, Brian},

  abstractNote = {The document summarized the technical progress associated with OSU’s involvement in the Hydrogen Storage Engineering Center of Excellence. OSU focused on the development of microscale enhancement technologies for improving heat and mass transfer in automotive hydrogen storage systems. OSU’s key contributions included the development of an extremely compact microchannel combustion system for discharging hydrogen storage systems and a thermal management system for adsorption based hydrogen storage using microchannel cooling (the Modular Adsorption Tank Insert or MATI).},

  doi          = {10.2172/1225296},

  url          = {https://www.osti.gov/biblio/1225296},
  journal      = {},
number       = ,

  volume       = ,

  place        = {United States},

  year         = {Wed Sep 30 00:00:00 EDT 2015},

  month        = {Wed Sep 30 00:00:00 EDT 2015}

}

Copy to clipboard

Technical Report:

View Technical Report (16.13 MB)

https://doi.org/10.2172/1225296

Save / Share:

Export Metadata

Save to My Library

Similar records in OSTI.GOV collections:

Advancement of Systems Designs and Key Engineering Technologies for Materials Based Hydrogen Storage

Technical Report van Hassel, Bart

UTRC lead the development of the Simulink Framework model that enables a comparison of different hydrogen storage systems on a common basis. The Simulink Framework model was disseminated on the www.HSECoE.org website that is hosted by NREL. UTRC contributed to a better understanding of the safety aspects of the proposed hydrogen storage systems. UTRC also participated in the Failure Mode and Effect Analysis of both the chemical- and the adsorbent-based hydrogen storage system during Phase 2 of the Hydrogen Storage Engineering Center of Excellence. UTRC designed a hydrogen storage system with a reversible metal hydride material in a compacted formmore »« less
https://doi.org/10.2172/1221532

Full Text Available
Experimental Study of Thermal Management and Enhancement of Adsorption-Based Onboard Hydrogen Storage System

Journal Article Wang, Hailei; Miller, Daniel - Journal of Electrochemical Energy Conversion and Storage

Abstract Although hydrogen has one of the highest specific energies, its energy density in terms of volume is very poor compared to liquid fuels. Thus, to achieve attractive energy density for hydrogen, either high-pressure compression or a storage method is needed. For onboard (vehicles) hydrogen storage, up to 700 bars are needed for commercial fuel cell vehicles. This creates extreme requirements for material strength and thus safety concerns. A new metal-organic framework 5 (MOF-5) was selected as the adsorbent for H2 storage, as it provides promising storage capacity and is commercially available. Under the same H2 storage capacity and tankmore »« less
https://doi.org/10.1115/1.4050508
Enhancement of Heat and Mass Transfer in Mechanically Contstrained Ultra Thin Films

Technical Report Drost, Kevin; Liburdy, Jim; Paul, Brian; ...

Oregon State University (OSU) and the Pacific Northwest National Laboratory (PNNL) were funded by the U.S. Department of Energy to conduct research focused on resolving the key technical issues that limited the deployment of efficient and extremely compact microtechnology based heat actuated absorption heat pumps and gas absorbers. Success in demonstrating these technologies will reduce the main barriers to the deployment of a technology that can significantly reduce energy consumption in the building, automotive and industrial sectors while providing a technology that can improve our ability to sequester CO{sub 2}. The proposed research cost $939,477. $539,477 of the proposed amountmore »« less
https://doi.org/10.2172/861948

Full Text Available
Sorbent Material Property Requirements for On-Board Hydrogen Storage for Automotive Fuel Cell Systems.

Journal Article Ahluwalia, R.; Peng, J-K; Hua, T. - International Journal of Hydrogen Energy

Material properties required for on-board hydrogen storage in cryogenic sorbents for use with automotive polymer electrolyte membrane (PEM) fuel cell systems are discussed. Models are formulated for physical, thermodynamic and transport properties, and for the dynamics of H-2 refueling and discharge from a sorbent bed. A conceptual storage configuration with in-bed heat exchanger tubes, a Type-3 containment vessel, vacuum insulation and requisite balance-of-plant components is developed to determine the peak excess sorption capacity and differential enthalpy of adsorption for 5.5 wt% system gravimetric capacity and 55% well-to-tank (WTT) efficiency. The analysis also determines the bulk density to which the materialmore »« less
https://doi.org/10.1016/j.ijhydene.2015.03.025
New Carbon-Based Porous Materials with Increased Heats of Adsorption for Hydrogen Storage

Technical Report Snurr, Randall; Hupp, Joseph; Kanatzidis, Mercouri; ...

Hydrogen fuel cell vehicles are a promising alternative to internal combustion engines that burn gasoline. A significant challenge in developing fuel cell vehicles is to store enough hydrogen on-board to allow the same driving range as current vehicles. One option for storing hydrogen on vehicles is to use tanks filled with porous materials that act as “sponges” to take up large quantities of hydrogen without the need for extremely high pressures. The materials must meet many requirements to make this possible. This project aimed to develop two related classes of porous materials to meet these requirements. All materials were synthesizedmore »« less
https://doi.org/10.2172/1163140

Full Text Available

Similar Records