skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: SO{sub 2} control in low emissions boiler systems with the COBRA process

Technical Report ·
OSTI ID:121459
;  [1];  [2]
  1. Tecogen, Waltham, MA (United States)
  2. Riley Stoker Corporation, Worcester, MA (United States); and others

The COBRA process is an advanced embodiment of the chemically well proven copper oxide process. COBRA stands for Copper Oxide Bed Regenerative Adsorber, a moving bed - cross flow configuration which is ideally suited for SO{sub 2} control and NO{sub x}, reduction through its SCR capabilities. The moving bed adsorber provides low sorbent attrition and allows the use of larger sorbent particle sizes for an overall more economical design. The location of the COBRA process between the economizer and the air heater enhances low temperature heat recovery by removing SO{sub 3} in addition to SO{sub 2}, thereby allowing for very low flue gas temperatures. This paper presents the results of a sensitivity analysis aimed at optimizing the design of a 400 Mw system and integration into a low emissions boiler system. It will identify the benefits of the technology, showing how it is possible to achieve a 99% reduction of SO{sub 2} with very low power consumption and produce a salable by-product - either sulfuric acid or elemental sulfur.

Research Organization:
Electric Power Research Inst. (EPRI), Palo Alto, CA (United States)
OSTI ID:
121459
Report Number(s):
EPRI-TR-105258-Vol.3; CONF-950332-Vol.3; TRN: 95:007569-0027
Resource Relation:
Conference: 15. EPRI-EPA-DOE SO/sub 2/ control symposium, Miami Beach, FL (United States), 28-31 Mar 1995; Other Information: PBD: Jun 1995; Related Information: Is Part Of Proceedings: 1995 SO{sub 2} control symposium. Volume 3, Sessions 6a, 6b, 7a, 7b; PB: 300 p.
Country of Publication:
United States
Language:
English