Electrodeposited Nanolaminated CoNiFe Cores for Ultracompact DC-DC Power Conversion

Journal Article · Tue Sep 01 00:00:00 EDT 2015 · IEEE Transactions on Power Electronics

DOI:https://doi.org/10.1109/TPEL.2014.2368140· OSTI ID:1211441

Kim, J; Kim, M; Herrault, F; Park, JY; Allen, MG

Laminated metallic alloy cores (i.e., alternating layers of thin film metallic alloy and insulating material) of appropriate lamination thickness enable suppression of eddy current losses at high frequencies. Magnetic cores comprised of many such laminations yield substantial overall magnetic volume, thereby enabling high-power operation. Previously, we reported nanolaminated permalloy (Ni-80 Fe-20) cores based on a sequential electrodeposition technique, demonstrating negligible eddy current losses at peak flux densities up to 0.5 T and operating at megahertz frequencies. This paper demonstrates improved performance of nanolaminated cores comprising tens to hundreds of layers of 300-500-nm-thick CoNiFe films that exhibit superior magnetic properties (e.g., higher saturation flux density and lower coercivity) than permalloy. Nanolaminated CoNiFe cores can be operated up to a peak flux density of 0.9 T, demonstrating improved power handling capacity and exhibiting 30% reduced volumetric core loss, attributed to lowered hysteresis losses compared to the nanolaminated permalloy core of the same geometry. Operating these cores in a buck dc-dc power converter at a switching frequency of 1 MHz, the nanolaminated CoNiFe cores achieved a conversion efficiency exceeding 90% at output power levels up to 7 W, compared to an achieved permalloy core conversion efficiency below 86% at 6 W.

• Sponsoring Organization: USDOE Advanced Research Projects Agency - Energy (ARPA-E)
• DOE Contract Number: DE-AR0000107
• OSTI ID: 1211441
• Journal Information: IEEE Transactions on Power Electronics, Vol. 30, Issue 9; ISSN 0885-8993
• Country of Publication: United States
• Language: English