Development and Validation of a Slurry Model for Chemical Hydrogen Storage in Fuel Cell Applications
The US Department of Energy's (DOE) Hydrogen Storage Engineering Center of Excellence (HSECoE) is developing models for hydrogen storage systems for fuel cell-based light duty vehicle applications for a variety of promising materials. These transient models simulate the performance of the storage system for comparison to the DOE’s Technical Targets and a set of four drive cycles. The purpose of this research is to describe the models developed for slurry-based chemical hydrogen storage materials. The storage systems of both a representative exothermic system based on ammonia borane and endothermic system based on alane were developed and modeled in Simulink®. Once complete the reactor and radiator components of the model were validated with experimental data. The model was then run using a highway cycle, an aggressive cycle, cold-start cycle and hot drive cycle. The system design was adjusted to meet these drive cycles. A sensitivity analysis was then performed to identify the range of material properties where these DOE targets and drive cycles could be met. Materials with a heat of reaction greater than 11 kJ/mol H2 generated and a slurry hydrogen capacity of greater than 11.4% will meet the on-board efficiency and gravimetric capacity targets, respectively.
- Research Organization:
- Pacific Northwest National Lab. (PNNL), Richland, WA (United States)
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- AC05-76RL01830
- OSTI ID:
- 1209868
- Report Number(s):
- PNNL-SA-103265; HT0202000
- Journal Information:
- Journal of Power Sources, 271:504515, Journal Name: Journal of Power Sources, 271:504515
- Country of Publication:
- United States
- Language:
- English
Similar Records
Slurry-Based Chemical Hydrogen Storage Systems for Automotive Fuel Cell Applications
Systems Modeling, Simulation and Material Operating Requirements for Chemical Hydride Based Hydrogen Storage