skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: A testpart for interdisciplinary analyses in micro production engineering

Journal Article · · Procedia CIRP
 [1];  [2];  [3];  [4];  [4];  [5];  [6];  [7];  [8];  [9];  [10];  [11]
  1. IFQ, OvGU Magdeburg, Magdeburg (Germany)
  2. ISF, Dortmund (Germany)
  3. Univ. of Padova, Vicenza (Italy)
  4. Univ. of Zaragoza (Spain)
  5. Centro Universitario de la Defensa, Zaragoza (Spain)
  6. KU Leuven, Katelijne-Waver (Belgium)
  7. Sabanci Univ., Istanbul (Turkey). Manufacturing Research Lab.
  8. TU Vienna, Karlsplatz (Austria)
  9. Univ. of Twente, Enschede (The Netherlands). Lab. of Design, Production and Management
  10. Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)
  11. Global Industrial Development, Sodertalje (Sweden)
+ Show Author Affiliations

In 2011, a round robin test was initiated within the group of CIRP Research Affiliates. The aim was to establish a platform for linking interdisciplinary research in order to share the expertise and experiences of participants all over the world. This paper introduces a testpart which has been designed to allow an analysis of different manufacturing technologies, simulation methods, machinery and metrology as well as process and production planning aspects. Current investigations are presented focusing on the machining and additive processes to produce the geometry, simulation approaches, machine analysis, and a comparison of measuring technologies. Challenges and limitations regarding the manufacturing and evaluation of the testpart features by the applied methods are discussed.

Research Organization:
Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States)
Sponsoring Organization:
USDOE
Grant/Contract Number:
AC02-05CH11231
OSTI ID:
1196873
Journal Information:
Procedia CIRP, Vol. 28, Issue C; Conference: 3. CIRP Global Web Conference - Production Engineering Research -- Advancement beyond state of the art (CIRPe2014), Naples (Italy), 3-5 Jun 2014; ISSN 2212-8271
Publisher:
ElsevierCopyright Statement
Country of Publication:
United States
Language:
English
Citation Metrics:
Cited by: 4 works
Citation information provided by
Web of Science

References (6)

Higher Efficiency Modeling of Surface Location Errors by Using a Multi-scale Milling Simulation journal January 2013
A general approach to simulating workpiece vibrations during five-axis milling of turbine blades journal January 2010
Dimensional measurement of micro-moulded parts by computed tomography journal October 2012
A 3D edge detection technique for surface extraction in computed tomography for dimensional metrology applications journal January 2013
Fundamental correction strategies for accuracy improvement of dimensional measurements obtained from a conventional micro-CT cone beam machine journal January 2013
Accuracy of industrial computed tomography measurements: Experimental results from an international comparison journal January 2012

Cited By (1)

X-ray computed tomography for additive manufacturing: a review journal June 2016

Similar Records

Related Subjects

97 MATHEMATICS AND COMPUTING
42 ENGINEERING
micro production engineering
testpart
round robin
micro milling
additive manufacturing
metrology
computed tomography