skip to main content

SciTech ConnectSciTech Connect

Title: Aluminum electroplating on steel from a fused bromide electrolyte

A quaternary bromide bath (LiBr–KBr–CsBr–AlBr3) was used to electro-coat aluminum on steel substrates. The electrolytewas prepared by the addition of AlBr3 into the eutectic LiBr–KBr–CsBr melt. A smooth, thick, adherent and shiny aluminum coating could be obtained with 80 wt.% AlBr3 in the ternary melt. The SEM photographs of the coated surfaces suggest the formation of thick and dense coatings with good aluminum coverage. Both salt immersion and open circuit potential measurement suggested that the coatings did display a good corrosionresistance behavior. Annealing of the coated surfaces, prior to corrosion tests, suggested the robustness of the metallic aluminum coating in preventing the corrosion of the steel surfaces. Studies also indicated that the quaternary bromide plating bath can potentially provide a better aluminumcoating on both ferrous and non-ferrous metals, including complex surfaces/geometries.
; ; ; ; ; ; ; ;
Publication Date:
OSTI Identifier:
Report Number(s):
Journal ID: ISSN 0257-8972
DOE Contract Number:
Resource Type:
Journal Article
Resource Relation:
Journal Name: Surface and Coatings Technology; Journal Volume: 258
Research Org:
Idaho National Laboratory (INL)
Sponsoring Org:
Country of Publication:
United States
99 GENERAL AND MISCELLANEOUS Aluminum Electroplating