Strain Partitioning in Ultra-Fine Grained Medium-Manganese Transformation Induced Plasticity Steel

Gibbs, Paul J.; De Cooman, Bruno; Brown, Donald W.; Clausen, Bjorn; Schroth, James G.; Merwin, Matthew J.; Matlock, David K.

doi:10.1016/j.msea.2014.03.120

Title: Strain Partitioning in Ultra-Fine Grained Medium-Manganese Transformation Induced Plasticity Steel

Journal Article · Fri Aug 01 00:00:00 EDT 2014 · Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing

DOI:https://doi.org/10.1016/j.msea.2014.03.120· OSTI ID:1148952

Gibbs, Paul J. ^[1]; De Cooman, Bruno ^[2]; Brown, Donald W. ^[1]; Clausen, Bjorn ^[1]; Schroth, James G. ^[3]; Merwin, Matthew J. ^[4]; Matlock, David K. ^[5]

Los Alamos National Laboratory
Graduate Institute of Ferrous Technology, Pohang University of Science and Technology
Research and Development Center, General Motors Corp.
United States Steel Research and Technology Center
Advanced Steel Processing and Properties Research Center, Colorado School of Mines

View Journal Article

Cite

Export

Save

Research Organization:: Los Alamos National Laboratory (LANL), Los Alamos, NM (United States)

Sponsoring Organization:: National Science Foundation (NSF)

DOE Contract Number:: AC52-06NA25396

OSTI ID:: 1148952

Report Number(s):: LA-UR-13-27175

Journal Information:: Materials Science and Engineering. A, Structural Materials: Properties, Microstructure and Processing, Vol. 609; ISSN 0921-5093

Publisher:: Elsevier

Country of Publication:: United States

Language:: English

References (40)

Transmission Electron Microscopy Analysis of Yielding in Ultrafine-Grained Medium Mn Transformation-Induced Plasticity Steel De Cooman, Bruno C.; Gibbs, Paul; Lee, Seawoong Metallurgical and Materials Transactions A, Vol. 44, Issue 6 https://doi.org/10.1007/s11661-013-1638-6	journal	February 2013
Austenite stability of ultrafine-grained transformation-induced plasticity steel with Mn partitioning Lee, Seawoong; Lee, Seok-Jae; De Cooman, Bruno C. Scripta Materialia, Vol. 65, Issue 3 https://doi.org/10.1016/j.scriptamat.2011.04.010	journal	August 2011
Ultrafine-grained microstructures and mechanical properties of alloy steels Miller, R. L. Metallurgical and Materials Transactions B, Vol. 3, Issue 4 https://doi.org/10.1007/BF02647665	journal	April 1972
Low-Carbon Manganese TRIP Steels Merwin, M. J. Materials Science Forum, Vol. 539-543 https://doi.org/10.4028/www.scientific.net/MSF.539-543.4327	journal	March 2007
Retained austenite in low carbon, manganese steel after intercritical heat treatment Huang, H.; Matsumura, O.; Furukawa, T. Materials Science and Technology, Vol. 10, Issue 7 https://doi.org/10.1179/mst.1994.10.7.621	journal	July 1994
Influence of Al on the Microstructural Evolution and Mechanical Behavior of Low-Carbon, Manganese Transformation-Induced-Plasticity Steel Suh, Dong-Woo; Park, Seong-Jun; Lee, Tae-Ho Metallurgical and Materials Transactions A, Vol. 41, Issue 2 https://doi.org/10.1007/s11661-009-0124-7	journal	December 2009
Effects of Manganese Content and Heat Treatment Condition on Mechanical Properties and Microstructures of Fine-Grained Low Carbon TRIP-Aided Steels Kim, Sung Joon Materials Science Forum, Vol. 638-642 https://doi.org/10.4028/www.scientific.net/MSF.638-642.3313	journal	January 2010
Ultra Fine-Grained 6wt% Manganese TRIP Steel Lee, Sea Woong; Lee, Kyoo Young; De Cooman, Bruno C. Materials Science Forum, Vol. 654-656 https://doi.org/10.4028/www.scientific.net/MSF.654-656.286	journal	June 2010
Localized Deformation in Multiphase, Ultra-Fine-Grained 6 Pct Mn Transformation-Induced Plasticity Steel Lee, Seawoong; Lee, Seok-Jae; Santhosh Kumar, S. Metallurgical and Materials Transactions A, Vol. 42, Issue 12 https://doi.org/10.1007/s11661-011-0636-9	journal	February 2011
Austenite Stability Effects on Tensile Behavior of Manganese-Enriched-Austenite Transformation-Induced Plasticity Steel Gibbs, P. J.; De Moor, E.; Merwin, M. J. Metallurgical and Materials Transactions A, Vol. 42, Issue 12 https://doi.org/10.1007/s11661-011-0687-y	journal	April 2011
In situ neutron diffraction study of α–γ Fe–Cr–Ni alloys under tensile deformation Harjo, S.; Tomota, Y.; Lukáš, P. Acta Materialia, Vol. 49, Issue 13 https://doi.org/10.1016/S1359-6454(01)00147-1	journal	August 2001
Lattice strain partitioning in a two-phase alloy and its redistribution upon yielding Han, Tong-Seok; Dawson, Paul R. Materials Science and Engineering: A, Vol. 405, Issue 1-2 https://doi.org/10.1016/j.msea.2005.05.095	journal	September 2005
Criterion for the action of applied stress in the martensitic transformation Patel, J. R.; Cohen, M. Acta Metallurgica, Vol. 1, Issue 5 https://doi.org/10.1016/0001-6160(53)90083-2	journal	September 1953
Tensile behavior of TRIP-aided multi-phase steels studied by in situ neutron diffraction Tomota, Y.; Tokuda, H.; Adachi, Y. Acta Materialia, Vol. 52, Issue 20 https://doi.org/10.1016/j.actamat.2004.08.016	journal	December 2004
Micromechanical characterisation of TRIP-assisted multiphase steels by in situ neutron diffraction Jacques, P. J.; Furnemont, Q.; Godet, S. Philosophical Magazine, Vol. 86, Issue 16 https://doi.org/10.1080/14786430500529359	journal	June 2006
Multiscale mechanics of TRIP-assisted multiphase steels: I. Characterization and mechanical testing Jacques, P. J.; Furnémont, Q.; Lani, F. Acta Materialia, Vol. 55, Issue 11 https://doi.org/10.1016/j.actamat.2007.02.029	journal	June 2007
In situ neutron diffraction investigation of the collaborative deformation–transformation mechanism in TRIP-assisted steels at room and elevated temperatures Muránsky, O.; Šittner, P.; Zrník, J. Acta Materialia, Vol. 56, Issue 14 https://doi.org/10.1016/j.actamat.2008.03.026	journal	August 2008
Analysis of lattice parameter changes following deformation of a 0.19C-1.63Si-1.59Mn transformation-induced plasticity sheet steel Streicher-Clarke, A. M.; Speer, J. G.; Matlock, D. K. Metallurgical and Materials Transactions A, Vol. 36, Issue 4 https://doi.org/10.1007/s11661-005-0285-y	journal	April 2005
Tensile Behavior of a TRIP-aided Ultra-fine Grained Steel Studied by Neutron Diffraction Asoo, Kazuya; Tomota, Yo; Harjo, Stefanus ISIJ International, Vol. 51, Issue 1 https://doi.org/10.2355/isijinternational.51.145	journal	January 2011
SMARTS - a spectrometer for strain measurement in engineering materials Bourke, M. A. M.; Dunand, D. C.; Ustundag, E. Applied Physics A: Materials Science & Processing, Vol. 74, Issue 0 https://doi.org/10.1007/s003390201747	journal	December 2002
A profile refinement method for nuclear and magnetic structures Rietveld, H. M. Journal of Applied Crystallography, Vol. 2, Issue 2, p. 65-71 https://doi.org/10.1107/S0021889869006558	journal	June 1969
Microstructural parameters from X-ray diffraction peak broadening Ungár, T. Scripta Materialia, Vol. 51, Issue 8 https://doi.org/10.1016/j.scriptamat.2004.05.007	journal	October 2004
X-ray diffraction study of the single-crystal elastic moduli of ε-Fe up to 30 GPa Merkel, Sébastien Journal of Geophysical Research, Vol. 110, Issue B5 https://doi.org/10.1029/2004JB003197	journal	January 2005
A method of calculating the integral breadths of Debye-Scherrer lines: generalization to non-cubic crystals Stokes, A. R.; Wilson, A. J. C. Mathematical Proceedings of the Cambridge Philosophical Society, Vol. 40, Issue 2 https://doi.org/10.1017/S0305004100018314	journal	June 1944
Contribution of snoek rearrangement to strain aging Rosinger, H. E.; Craig, G. B.; Bratina, W. J. Materials Science and Engineering, Vol. 5, Issue 3 https://doi.org/10.1016/0025-5416(70)90095-9	journal	February 1970
Martensitic transformations induced by plastic deformation in the Fe-Ni-Cr-C system Lecroisey, F.; Pineau, A. Metallurgical and Materials Transactions B, Vol. 3, Issue 2 https://doi.org/10.1007/BF02642042	journal	February 1972
Kinetics of strain-induced martensitic nucleation Olson, G. B.; Cohen, Morris Metallurgical Transactions A, Vol. 6, Issue 4 https://doi.org/10.1007/BF02672301	journal	April 1975
Einfluß der Stapelfehlerenergie auf den kristallographischen Umgitterungsmechanismus der γ/α-Umwandlung in hochlegierten Stählen Schumann, H. Kristall und Technik, Vol. 9, Issue 10 https://doi.org/10.1002/crat.19740091009	journal	January 1974
On the f.c.c. → h.c.p. phase transformation in high manganese-iron alloys Gartstein, E.; Rabinkin, A. Acta Metallurgica, Vol. 27, Issue 6 https://doi.org/10.1016/0001-6160(79)90193-7	journal	June 1979
High-energy X-ray diffraction study on the temperature-dependent mechanical stability of retained austenite in low-alloyed TRIP steels Blondé, R.; Jimenez-Melero, E.; Zhao, L. Acta Materialia, Vol. 60, Issue 2 https://doi.org/10.1016/j.actamat.2011.10.019	journal	January 2012
Lattice changes of iron-carbon martensite on aging at room temperature Cheng, Liu; van der Pers, N. M.; Böttger, A. Metallurgical Transactions A, Vol. 22, Issue 9 https://doi.org/10.1007/BF02669863	journal	September 1991
Aging of freshly formed Fe- based martensites at low temperatures Ullakko, K.; Gavriljuk, V. G.; Nadutov, V. M. Metallurgical and Materials Transactions A, Vol. 25, Issue 5 https://doi.org/10.1007/BF02652265	journal	May 1994
Mn partitioning during the intercritical annealing of ultrafine-grained 6% Mn transformation-induced plasticity steel Lee, Seok-Jae; Lee, Seawoong; De Cooman, Bruno C. Scripta Materialia, Vol. 64, Issue 7 https://doi.org/10.1016/j.scriptamat.2010.12.012	journal	April 2011
Conversional model of transformation strain to phase fraction in low alloy steels Lee, S. -J.; Lusk, M. T.; Lee, Y. -K. Acta Materialia, Vol. 55, Issue 3 https://doi.org/10.1016/j.actamat.2006.09.008	journal	February 2007
High-temperature X-ray studies of austenitizing processes in steels Lipchin, N. N.; Oslon, N. L.; Kokovyakina, S. A. Metal Science and Heat Treatment, Vol. 14, Issue 1 https://doi.org/10.1007/BF00658336	journal	January 1972
Characteristics of the γ→α transformation in Fe–Mn alloys Li, Chun-Ming; Sommer, Ferdinand; Mittemeijer, Eric J. Materials Science and Engineering: A, Vol. 325, Issue 1-2 https://doi.org/10.1016/S0921-5093(01)01459-9	journal	February 2002
Quantitative analyses of ferrite lattice parameter and solute Nb content in low carbon microalloyed steels Lee, Seok-Jae; Lee, Young-Kook Scripta Materialia, Vol. 52, Issue 10 https://doi.org/10.1016/j.scriptamat.2005.01.028	journal	May 2005
Stress-assisted isothermal martensitic transformation: Application to TRIP steels Olson, G. B.; Cohen, Morris Metallurgical Transactions A, Vol. 13, Issue 11 https://doi.org/10.1007/BF02645934	journal	November 1982
Stress-assisted martensitic transformations in steels: A 3-D phase-field study Yeddu, Hemantha Kumar; Borgenstam, Annika; Ågren, John Acta Materialia, Vol. 61, Issue 7 https://doi.org/10.1016/j.actamat.2013.01.039	journal	April 2013
On the deformation behavior of dual-phase steels Ramos, Luis F.; Matlock, David K.; Krauss, George Metallurgical Transactions A, Vol. 10, Issue 2 https://doi.org/10.1007/BF02817636	journal	February 1979

Similar Records

Austenite Stability Controlled Mechanical Behavior of Medium Manganese Transformation Induced Plasticity Steels

Conference · Mon Jun 15 00:00:00 EDT 2015 · OSTI ID:1148952

Rana, Radhakanta; Matlock, David K; Speer, John G; +1 more

Investigation of the structure and properties of iron--manganese--carbon alloys. [Low cost TRIP (Transformation Induced Plasticity) steels with high and medium strengths]

Technical Report · Thu May 01 00:00:00 EDT 1975 · OSTI ID:1148952

Atteridge, D G

Transition from the twinning induced plasticity to the γ-ε transformation induced plasticity in a high manganese steel

Journal Article · Sat Dec 01 00:00:00 EST 2018 · Acta Materialia · OSTI ID:1148952

Xie, Q.; Pei, Z.; Liang, J.; +6 more

Related Subjects

Materials Science(36)

Title: Strain Partitioning in Ultra-Fine Grained Medium-Manganese Transformation Induced Plasticity Steel

Citation Formats

References (40)

Similar Records

Related Subjects