In situ measurement of tritium permeation through stainless steel
The TMIST-2 irradiation experiment was conducted in the Advanced Test Reactor at Idaho National Laboratory to evaluate tritium permeation through Type 316 stainless steel (316 SS). The interior of a 316 SS seamless tube specimen was exposed to a 4He carrier gas mixed with a specified quantity of tritium (T2) to yield partial pressures of 0.1, 5, and 50 Pa at 292 degrees C and 330 degrees C. In situ tritium permeation measurements were made by passing a He-Ne sweep gas over the outer surface of the specimen to carry the permeated tritium to a bubbler column for liquid scintillation counting. Results from in situ permeation measurements were compared with predictions based on an ex-reactor permeation correlation in the literature. In situ permeation data were also used to derive an in-reactor permeation correlation as a function of temperature and pressure over the ranges considered in this study. In addition, the triton recoil contribution to tritium permeation, which results from the transmutation of 3He to T, was also evaluated by introducing a 4He carrier gas mixed with 3He at a partial pressure of 1013 Pa at 330 degrees C. Less than 3% of the tritium resulting from 3He transmutation contributed to tritium permeation.
- Research Organization:
- Idaho National Lab. (INL), Idaho Falls, ID (United States)
- Sponsoring Organization:
- DOE - NA
- DOE Contract Number:
- DE-AC07-05ID14517
- OSTI ID:
- 1111061
- Report Number(s):
- INL/JOU-13-30660
- Journal Information:
- Journal of Nuclear Materials, Vol. 437, Issue 1 - 3; ISSN 0022-3115
- Country of Publication:
- United States
- Language:
- English
Similar Records
IN-SITU MEASUREMENT OF TRITIUM PERMEATION THROUGH STAINLESS STEEL
Tritium permeation through oxidized 304 and 316 stainless steel