Epitaxial La0.5Sr0.5CoO3 thin films: Structure, magnetism, and transport
- University of Minnesota
- Los Alamos National Laboratory (LANL)
- Oak Ridge National Laboratory (ORNL)
La1 xSrxCoO3 has received considerable attention in bulk form. This is due to interest in the fundamental magnetic properties spin-state transitions and magnetic phase separation as well as potential applications in ferroelectric memory and solid-oxide fuel cells. The structure and properties in thin film form are not well understood, and the influence of dimensional confinement on effects such as magnetic phase separation is unknown. Here, we report a comprehensive investigation of structure, magnetism, and transport in strained epitaxial La0.5Sr0.5CoO3 001 films deposited on SrTiO3 001 substrates by reactive dc magnetron sputtering. The crystalline quality, phase purity, strain state, oxygen stoichiometry, morphology, and magnetic and electronic properties of the epilayers are all probed and are found to be particularly sensitive to the total sputtering gas pressure and the ratio of reactive to inert gas PO2 /PAr. The various structure-property relationships are discussed in detail, particularly with respect to the degree of oxygenation and oxygen-induced resputtering. The films are strained and tetragonally distorted due to the 1.9% lattice mismatch with SrTiO3. Significant strain relaxation occurs at thicknesses around 200 , resulting in a crossover from two-dimensional-like to three-dimensional growth. Polarized neutron reflectometry was combined with x-ray reflectometry to obtain chemical and magnetic depth profiles, which are compared with cross-sectional scanning transmission electron microscopy. The results indicate a thin 10 layer at the film/substrate interface with significantly different structural properties to the bulk of the film, as well as a strongly graded magnetic and chemical profile at the film surface due to the significant roughness. The Curie temperature was found to decrease very slowly as the thickness is reduced down to 50 , at which point a rapid decrease occurs, almost coincident with a sharp decrease in saturation magnetization. At this point, the temperature dependence of the resistivity shows a crossover from metallic to insulating, accompanied by dramatic changes in the magnetoresistance. The magnetoresistance has a negative contribution peaking around the Curie point similar to that seen in bulk, a second negative contribution occurring at low temperature only for the thinnest samples, as well as a large anisotropic magnetoresistance, which vanishes at the Curie point. Remarkably, the low temperature contribution in the thinnest x=0.5 films bears a striking resemblance to that seen in the insulating phase x0.17 in bulk, suggesting the formation of a nonmetallic phase at low thickness that is similar to the low doping bulk phase, i.e., magnetic phase separation near the interface with SrTiO3.
- Research Organization:
- Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
- Sponsoring Organization:
- USDOE Office of Science (SC)
- DOE Contract Number:
- DE-AC05-00OR22725
- OSTI ID:
- 1050933
- Journal Information:
- Journal of Applied Physics, Vol. 104, Issue 2; ISSN 0021-8979
- Country of Publication:
- United States
- Language:
- English
Similar Records
Influence of the Thickness of the Ferro- and Antiferromagnetic Phases on Magnetic Properties in Epitaxial Heterostructures Based on Exchange Biased La-Ca-Mn-O System
Growth temperature control of the epitaxy, magnetism, and transport in SrTiO3(001) / La0.5Sr0.5CoO3 thin films
Related Subjects
CONFINEMENT
CURIE POINT
FUEL CELLS
MAGNETIC PROPERTIES
MAGNETISM
MAGNETIZATION
MAGNETORESISTANCE
MAGNETRONS
MORPHOLOGY
NEUTRONS
OXYGEN
RELAXATION
ROUGHNESS
SATURATION
SPUTTERING
STOICHIOMETRY
STRAINS
SUBSTRATES
TEMPERATURE DEPENDENCE
THICKNESS
THIN FILMS
TRANSMISSION ELECTRON MICROSCOPY
TRANSPORT