Analysis and testing of multilayer and aerogel insulation configurations
- NASA Kennedy Space Center, Kennedy Space Center, Florida
- ORNL
Multilayer insulation systems that have robust operational characteristics have long been a goal of many research projects. Such thermal insulation systems may need to offer some degree of structural support and/or mechanical integrity during loss of vacuum scenarios while continuing to provide insulative value to the vessel. Aerogel-based composite blankets can be the best insulation materials in ambient pressure environments; in high vacuum, the thermal performance of aerogel improves by about one order of magnitude. Standard multilayer insulation (MLI) is typically 50% worse at ambient pressure and at soft vacuum, but as much as two or three orders of magnitude better at high vacuum. Different combinations of aerogel blanket and multilayer insulation materials have been tested at the Cryogenics Test Laboratory of NASA Kennedy Space Center. Analysis performed at Oak Ridge National Laboratory showed an importance to the relative location of the MLI and aerogel blankets. Apparent thermal conductivity testing under cryogenicvacuum conditions was performed to verify the analytical conclusion. Tests results are shown to be in agreement with the analysis which indicated that the best performance is obtained with aerogel layers located in the middle of the blanket insulation system.
- Research Organization:
- Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)
- Sponsoring Organization:
- OE USDOE - Office of Electric Transmission and Distribution
- DOE Contract Number:
- DE-AC05-00OR22725
- OSTI ID:
- 1018574
- Resource Relation:
- Conference: 2009 Cryogenic Engineering Conference and international Cryogenic Materials Conference, Tucson,, AZ, USA, 20090628, 20090702
- Country of Publication:
- United States
- Language:
- English
Similar Records
Thermal performance measurements of a 100 percent polyester MLI (multilayer insulation) system for the Superconducting Super Collider
Thermal performance of various multilayer insulation systems below 80K