Design and implementation of a multiaxial loading capability during heating on an engineering neutron diffractometer

Benafan, O.; Padula, S. A.; Skorpenske, H. D.; An, K.; Vaidyanathan, R.

doi:10.1063/1.4896042

Title: Design and implementation of a multiaxial loading capability during heating on an engineering neutron diffractometer

Abstract

Here we discuss a gripping capability that was designed, implemented, and tested for in situ neutron diffraction measurements during multiaxial loading and heating on the VULCAN engineering materials diffractometer at the spallation neutron source at Oak Ridge National Laboratory.

Authors:

Benafan, O. ^[1]; Padula, S. A. ^[2]; Skorpenske, H. D. ^[3]; An, K. ^[3]; Vaidyanathan, R. ^[4]

NASA Glenn Research Center, Cleveland, OH (United States). Structures and Materials Division; Univ. of Central Florida, Orlando, FL (United States)
NASA Glenn Research Center, Cleveland, OH (United States). Structures and Materials Division
Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Spallation Neutron Source (SNS)
Univ. of Central Florida, Orlando, FL (United States)

Publication Date:: Thu Oct 02 00:00:00 EDT 2014

Research Org.:: Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States). Spallation Neutron Source (SNS)

Sponsoring Org.:: USDOE Office of Science (SC)

OSTI Identifier:: 1163578

Grant/Contract Number:: AC05-00OR22725

Resource Type:: Accepted Manuscript

Journal Name:: Review of Scientific Instruments

Additional Journal Information:: Journal Volume: 85; Journal Issue: 10; Journal ID: ISSN 0034-6748

Publisher:: American Institute of Physics (AIP)

Country of Publication:: United States

Language:: English

Subject:: 42 ENGINEERING

Citation Formats


                    Benafan, O., Padula, S. A., Skorpenske, H. D., An, K., and Vaidyanathan, R. Design and implementation of a multiaxial loading capability during heating on an engineering neutron diffractometer.  United States: N. p., 2014. 
Web.  doi:10.1063/1.4896042.

Copy to clipboard


                    Benafan, O., Padula, S. A., Skorpenske, H. D., An, K., & Vaidyanathan, R. Design and implementation of a multiaxial loading capability during heating on an engineering neutron diffractometer.  United States.  https://doi.org/10.1063/1.4896042

Copy to clipboard


                    Benafan, O., Padula, S. A., Skorpenske, H. D., An, K., and Vaidyanathan, R. Thu .  
"Design and implementation of a multiaxial loading capability during heating on an engineering neutron diffractometer".  United States.  https://doi.org/10.1063/1.4896042.  https://www.osti.gov/servlets/purl/1163578.

Copy to clipboard


                    
@article{osti_1163578,

  title        = {Design and implementation of a multiaxial loading capability during heating on an engineering neutron diffractometer},

  author       = {Benafan, O. and Padula, S. A. and Skorpenske, H. D. and An, K. and Vaidyanathan, R.},

  abstractNote = {Here we discuss a gripping capability that was designed, implemented, and tested for in situ neutron diffraction measurements during multiaxial loading and heating on the VULCAN engineering materials diffractometer at the spallation neutron source at Oak Ridge National Laboratory.},

  doi          = {10.1063/1.4896042},

  journal      = {Review of Scientific Instruments},

  number       = 10,

  volume       = 85,

  place        = {United States},

  year         = {Thu Oct 02 00:00:00 EDT 2014},

  month        = {Thu Oct 02 00:00:00 EDT 2014}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (DOE)

Publisher's Version of Record

https://doi.org/10.1063/1.4896042

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 10 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Works referenced in this record:

Temperature dependent deformation of the B2 austenite phase of a NiTi shape memory alloy
journal, December 2013

Benafan, O.; Noebe, R. D.; Padula, S. A.
International Journal of Plasticity, Vol. 51
DOI: 10.1016/j.ijplas.2013.06.003

An in situ neutron diffraction study of shape setting shape memory NiTi
journal, June 2013

Benafan, O.; Padula, S. A.; Noebe, R. D.
Acta Materialia, Vol. 61, Issue 10
DOI: 10.1016/j.actamat.2013.02.040

In-situ diffraction investigation of superelastic NiTi shape memory alloys under mechanical stress with neutrons and with synchrotron radiation
journal, May 2004

Khalil-Allafi, J.; Hasse, B.; Klönne, M.
Materialwissenschaft und Werkstofftechnik, Vol. 35, Issue 5
DOI: 10.1002/mawe.200400744

First Results from the VULCAN Diffractometer at the SNS
journal, May 2010

Wang, X. L.; Holden, Thomas; Stoica, A. D.
Materials Science Forum, Vol. 652
DOI: 10.4028/www.scientific.net/MSF.652.105

Introduction to the Characterization of Residual Stress by Neutron Diffraction
book, January 2005

Hutchings, M. T.; Withers, P. J.; Holden, T. M.
DOI: 10.1201/9780203402818

Martensite evolution in a NiTi shape memory alloy when thermal cycling under an applied load
journal, October 2011

Jones, N. G.; Dye, D.
Intermetallics, Vol. 19, Issue 10
DOI: 10.1016/j.intermet.2011.03.032

Measurement of the lattice plane strain and phase fraction evolution during heating and cooling in shape memory NiTi
journal, October 2009

Qiu, S.; Krishnan, V. B.; Padula, S. A.
Applied Physics Letters, Vol. 95, Issue 14
DOI: 10.1063/1.3245308

A versatile automated sample changer for texture measurements on the high pressure-preferred orientation neutron diffractometer
journal, September 2010

Reiche, H. M.; Vogel, S. C.
Review of Scientific Instruments, Vol. 81, Issue 9
DOI: 10.1063/1.3485035

First In Situ Lattice Strains Measurements Under Load at VULCAN
journal, October 2010

An, Ke; Skorpenske, Harley D.; Stoica, Alexandru D.
Metallurgical and Materials Transactions A, Vol. 42, Issue 1
DOI: 10.1007/s11661-010-0495-9

On elastic moduli and elastic anisotropy in polycrystalline martensitic NiTi
journal, August 2011

Qiu, S.; Clausen, B.; Padula, S. A.
Acta Materialia, Vol. 59, Issue 13
DOI: 10.1016/j.actamat.2011.04.018

Phase fraction, texture and strain evolution in superelastic NiTi and NiTi–TiC composites investigated by neutron diffraction
journal, September 1999

Vaidyanathan, R.; Bourke, M. A. M.; Dunand, D. C.
Acta Materialia, Vol. 47, Issue 12
DOI: 10.1016/S1359-6454(99)00214-1

Smart wing shape memory alloy actuator design and performance
conference, May 1997

Jardine, A. Peter; Flanagan, John S.; Martin, Christopher A.
Smart Structures and Materials '97, SPIE Proceedings
DOI: 10.1117/12.274685

In situ neutron diffraction studies of martensitic transformations in NiTi polycrystals under tension and compression stress
journal, July 2004

Šittner, P.; Lukáš, P.; Novák, V.
Materials Science and Engineering: A, Vol. 378, Issue 1-2
DOI: 10.1016/j.msea.2003.09.112

Thermoelastic and texture behavior of aluminum at high pressure and high temperature investigated by in situ neutron diffraction
journal, May 2004

He, Duanwei; Zhao, Yusheng; Daemen, L. L.
Journal of Applied Physics, Vol. 95, Issue 9
DOI: 10.1063/1.1688460

VULCAN—The engineering diffractometer at the SNS
journal, November 2006

Wang, X. -L.; Holden, T. M.; Rennich, G. Q.
Physica B: Condensed Matter, Vol. 385-386
DOI: 10.1016/j.physb.2006.06.103

Thermo-mechanical characterization of shape memory alloy torque tube actuators
journal, September 2000

Keefe, Andrew C.; Carman, Gregory P.
Smart Materials and Structures, Vol. 9, Issue 5
DOI: 10.1088/0964-1726/9/5/311

Micromechanical quantification of elastic, twinning, and slip strain partitioning exhibited by polycrystalline, monoclinic nickel–titanium during large uniaxial deformations measured via in-situ neutron diffraction
journal, November 2013

Stebner, A. P.; Vogel, S. C.; Noebe, R. D.
Journal of the Mechanics and Physics of Solids, Vol. 61, Issue 11
DOI: 10.1016/j.jmps.2013.05.008

In-situ measurement of texture and elastic strains with HIPPO–CRATES
journal, November 2006

Hartig, Ch.; Vogel, S. C.; Mecking, H.
Materials Science and Engineering: A, Vol. 437, Issue 1
DOI: 10.1016/j.msea.2006.04.070

Design, implementation, and testing of a cryogenic loading capability on an engineering neutron diffractometer
journal, June 2010

Woodruff, T. R.; Krishnan, V. B.; Clausen, B.
Review of Scientific Instruments, Vol. 81, Issue 6
DOI: 10.1063/1.3436637

Diffraction measurements of elastic strains in stainless steel subjected to in situ biaxial loading
journal, September 2008

Marin, T.; Dawson, P. R.; Gharghouri, M. A.
Acta Materialia, Vol. 56, Issue 16
DOI: 10.1016/j.actamat.2008.04.048

High-pressure neutron-diffraction study of the metallization process in PrNi $O_{3}$
journal, October 1995

Medarde, M.; Mesot, J.; Lacorre, P.
Physical Review B, Vol. 52, Issue 13
DOI: 10.1103/PhysRevB.52.9248

Temperature-dependent behavior of a polycrystalline NiTi shape memory alloy around the transformation regime
journal, April 2013

Benafan, O.; Noebe, R. D.; Padula, S. A.
Scripta Materialia, Vol. 68, Issue 8
DOI: 10.1016/j.scriptamat.2012.11.042

A profile refinement method for nuclear and magnetic structures
journal, June 1969

Rietveld, H. M.
Journal of Applied Crystallography, Vol. 2, Issue 2, p. 65-71
DOI: 10.1107/S0021889869006558

Mechanical and functional behavior of a Ni-rich Ni50.3Ti29.7Hf20 high temperature shape memory alloy
journal, July 2014

Benafan, O.; Garg, A.; Noebe, R. D.
Intermetallics, Vol. 50
DOI: 10.1016/j.intermet.2014.02.006

Young’s modulus evolution and texture-based elastic–inelastic strain partitioning during large uniaxial deformations of monoclinic nickel–titanium
journal, April 2013

Stebner, A. P.; Brown, D. W.; Brinson, L. C.
Acta Materialia, Vol. 61, Issue 6
DOI: 10.1016/j.actamat.2012.12.015

Role of B19′ martensite deformation in stabilizing two-way shape memory behavior in NiTi
journal, November 2012

Benafan, O.; Padula, S. A.; Noebe, R. D.
Journal of Applied Physics, Vol. 112, Issue 9
DOI: 10.1063/1.4764313

Effect of Upper-Cycle Temperature on the Load-Biased, Strain-Temperature Response of NiTi
journal, June 2012

Padula, Santo; Qiu, Shipeng; Gaydosh, Darrell
Metallurgical and Materials Transactions A, Vol. 43, Issue 12
DOI: 10.1007/s11661-012-1267-5

Similar Records in DOE PAGES and OSTI.GOV collections:

Design and implementation of a multiaxial loading capability during heating on an engineering neutron diffractometer

Journal Article Benafan, O., E-mail: othmane.benafan@nasa.gov ; Advanced Materials Processing and Analysis Center, Materials Science and Engineering Department, University of Central Florida, Orlando, Florida 32816 ; Padula, S. A. ; ... - Review of Scientific Instruments

A gripping capability was designed, implemented, and tested for in situ neutron diffraction measurements during multiaxial loading and heating on the VULCAN engineering materials diffractometer at the spallation neutron source at Oak Ridge National Laboratory. The proposed capability allowed for the acquisition of neutron spectra during tension, compression, torsion, and/or complex loading paths at elevated temperatures. The design consisted of age-hardened, Inconel{sup ®} 718 grips with direct attachment to the existing MTS load frame having axial and torsional capacities of 100 kN and 400 N·m, respectively. Internal cooling passages were incorporated into the gripping system for fast cooling rates duringmore »« less
https://doi.org/10.1063/1.4896042
Development of an in-situ Neutron-Scattering Facility for Research and Educaton in the Mechanical Behavior of Materials

Book Liaw, Peter K ; Choo, Hahn ; Buchanan, R. A. ; ...

The present work is to establish a suite of instruments for studying the mechanical behavior of advanced materials using in situ neutron-scattering at the impending Spallation Neutron Source (SNS, The Oak Ridge National Laboratory), which will provide the most intense pulsed-neutron source in the world. The state-of-the-art in situ and real-time characterization instrumentation will be developed for VULCAN at SNS. The VULCAN diffractometer is designed to conduct fundamental studies in materials science and engineering with a focus on the mechanical behavior. The instrumentation described here will enable VULCAN to fulfill its full potential. The characterization capabilities to be developed willmore »« less
Design, implementation, and testing of a cryogenic loading capability on an engineering neutron diffractometer

Journal Article Woodruff, T R ; Krishnan, V B ; Vaidyanathan, R ; ... - Review of Scientific Instruments

A novel capability was designed, implemented, and tested for in situ neutron diffraction measurements during loading at cryogenic temperatures on the spectrometer for materials research at temperature and stress at Los Alamos National Laboratory. This capability allowed for the application of dynamic compressive forces of up to 250 kN on standard samples controlled at temperatures between 300 and 90 K. The approach comprised of cooling thermally isolated compression platens that in turn conductively cooled the sample in an aluminum vacuum chamber which was nominally transparent to the incident and diffracted neutrons. The cooling/heat rate and final temperature were controlled bymore »« less
https://doi.org/10.1063/1.3436637
Neutrons and Nuclear Engineering

Journal Article Ekkebus, Allen E - University Currents

Oak Ridge National Laboratory hosted two workshops in April 2007 relevant to nuclear engineering education. In the Neutron Stress, Texture, and Phase Transformation for Industry workshop [http://neutrons.ornl.gov/workshops/nst2/], several invited speakers gave examples of neutron stress mapping for nuclear engineering applications. These included John Root of National Research Council of Canada, Mike Fitzpatrick of the UK's Open University, and Yan Gao of GE Global Research on their experiences with industrial and academic uses of neutron diffraction. Xun-Li Wang and Camden Hubbard described the new instruments at ORNL that can be used for such studies. This was preceded by the Neutrons formore »« less
Extracting grain-orientation-dependent data from in situ time-of-flight neutron diffraction. I. Inverse pole figures

Journal Article Stoica, Grigoreta M. ; Stoica, Alexandru Dan ; An, Ke ; ... - Journal of Applied Crystallography (Online)

The problem of calculating the inverse pole figure (IPF) is analyzed from the perspective of the application of time-of flight neutron diffraction toin situmonitoring of the thermomechanical behavior of engineering materials. On the basis of a quasi-Monte Carlo (QMC) method, a consistent set of grain orientations is generated and used to compute the weighting factors for IPF normalization. The weighting factors are instrument dependent and were calculated for the engineering materials diffractometer VULCAN (Spallation Neutron Source, Oak Ridge National Laboratory). The QMC method is applied to face-centered cubic structures and can be easily extended to other crystallographic symmetries. Examples includemore »« less
Cited by 14
https://doi.org/10.1107/S1600576714023036

Full Text Available

Similar Records

Title: Design and implementation of a multiaxial loading capability during heating on an engineering neutron diffractometer

Abstract

Citation Formats

Temperature dependent deformation of the B2 austenite phase of a NiTi shape memory alloy journal, December 2013

An in situ neutron diffraction study of shape setting shape memory NiTi journal, June 2013

In-situ diffraction investigation of superelastic NiTi shape memory alloys under mechanical stress with neutrons and with synchrotron radiation journal, May 2004

First Results from the VULCAN Diffractometer at the SNS journal, May 2010

Introduction to the Characterization of Residual Stress by Neutron Diffraction book, January 2005

Martensite evolution in a NiTi shape memory alloy when thermal cycling under an applied load journal, October 2011

Measurement of the lattice plane strain and phase fraction evolution during heating and cooling in shape memory NiTi journal, October 2009

A versatile automated sample changer for texture measurements on the high pressure-preferred orientation neutron diffractometer journal, September 2010

First In Situ Lattice Strains Measurements Under Load at VULCAN journal, October 2010

On elastic moduli and elastic anisotropy in polycrystalline martensitic NiTi journal, August 2011

Phase fraction, texture and strain evolution in superelastic NiTi and NiTi–TiC composites investigated by neutron diffraction journal, September 1999

Smart wing shape memory alloy actuator design and performance conference, May 1997

In situ neutron diffraction studies of martensitic transformations in NiTi polycrystals under tension and compression stress journal, July 2004

Thermoelastic and texture behavior of aluminum at high pressure and high temperature investigated by in situ neutron diffraction journal, May 2004

VULCAN—The engineering diffractometer at the SNS journal, November 2006

Thermo-mechanical characterization of shape memory alloy torque tube actuators journal, September 2000

Micromechanical quantification of elastic, twinning, and slip strain partitioning exhibited by polycrystalline, monoclinic nickel–titanium during large uniaxial deformations measured via in-situ neutron diffraction journal, November 2013

In-situ measurement of texture and elastic strains with HIPPO–CRATES journal, November 2006

Design, implementation, and testing of a cryogenic loading capability on an engineering neutron diffractometer journal, June 2010

Diffraction measurements of elastic strains in stainless steel subjected to in situ biaxial loading journal, September 2008

High-pressure neutron-diffraction study of the metallization process in PrNi O 3 journal, October 1995

Temperature-dependent behavior of a polycrystalline NiTi shape memory alloy around the transformation regime journal, April 2013

A profile refinement method for nuclear and magnetic structures journal, June 1969

Mechanical and functional behavior of a Ni-rich Ni50.3Ti29.7Hf20 high temperature shape memory alloy journal, July 2014

Young’s modulus evolution and texture-based elastic–inelastic strain partitioning during large uniaxial deformations of monoclinic nickel–titanium journal, April 2013

Role of B19′ martensite deformation in stabilizing two-way shape memory behavior in NiTi journal, November 2012

Effect of Upper-Cycle Temperature on the Load-Biased, Strain-Temperature Response of NiTi journal, June 2012

Temperature dependent deformation of the B2 austenite phase of a NiTi shape memory alloy
journal, December 2013

An in situ neutron diffraction study of shape setting shape memory NiTi
journal, June 2013

In-situ diffraction investigation of superelastic NiTi shape memory alloys under mechanical stress with neutrons and with synchrotron radiation
journal, May 2004

First Results from the VULCAN Diffractometer at the SNS
journal, May 2010

Introduction to the Characterization of Residual Stress by Neutron Diffraction
book, January 2005

Martensite evolution in a NiTi shape memory alloy when thermal cycling under an applied load
journal, October 2011

Measurement of the lattice plane strain and phase fraction evolution during heating and cooling in shape memory NiTi
journal, October 2009

A versatile automated sample changer for texture measurements on the high pressure-preferred orientation neutron diffractometer
journal, September 2010

First In Situ Lattice Strains Measurements Under Load at VULCAN
journal, October 2010

On elastic moduli and elastic anisotropy in polycrystalline martensitic NiTi
journal, August 2011

Phase fraction, texture and strain evolution in superelastic NiTi and NiTi–TiC composites investigated by neutron diffraction
journal, September 1999

Smart wing shape memory alloy actuator design and performance
conference, May 1997

In situ neutron diffraction studies of martensitic transformations in NiTi polycrystals under tension and compression stress
journal, July 2004

Thermoelastic and texture behavior of aluminum at high pressure and high temperature investigated by in situ neutron diffraction
journal, May 2004

VULCAN—The engineering diffractometer at the SNS
journal, November 2006

Thermo-mechanical characterization of shape memory alloy torque tube actuators
journal, September 2000

Micromechanical quantification of elastic, twinning, and slip strain partitioning exhibited by polycrystalline, monoclinic nickel–titanium during large uniaxial deformations measured via in-situ neutron diffraction
journal, November 2013

In-situ measurement of texture and elastic strains with HIPPO–CRATES
journal, November 2006

Design, implementation, and testing of a cryogenic loading capability on an engineering neutron diffractometer
journal, June 2010

Diffraction measurements of elastic strains in stainless steel subjected to in situ biaxial loading
journal, September 2008

High-pressure neutron-diffraction study of the metallization process in PrNi $O_{3}$
journal, October 1995

Temperature-dependent behavior of a polycrystalline NiTi shape memory alloy around the transformation regime
journal, April 2013

A profile refinement method for nuclear and magnetic structures
journal, June 1969

Mechanical and functional behavior of a Ni-rich Ni50.3Ti29.7Hf20 high temperature shape memory alloy
journal, July 2014

Young’s modulus evolution and texture-based elastic–inelastic strain partitioning during large uniaxial deformations of monoclinic nickel–titanium
journal, April 2013

Role of B19′ martensite deformation in stabilizing two-way shape memory behavior in NiTi
journal, November 2012

Effect of Upper-Cycle Temperature on the Load-Biased, Strain-Temperature Response of NiTi
journal, June 2012