Deformation mechanisms of ultra-thin Al layers in Al/SiC nanolaminates as a function of thickness and temperature
Abstract
The mechanical properties of Al/SiC nanolaminates with layer thicknesses between 10 and 100 nm were studied by nanoindentation in the temperature range 25 to 100 °C. The strength of the Al layers as a function of the layer thickness and temperature was obtained from the hardness of the nanolaminates by an inverse methodology based on the numerical simulation of the nanoindentation tests by means of the finite element method. The room temperature yield stress of the Al layers showed a large ‘the thinner, the stronger’ effect, which depended not only on the layer thickness but also on the microstructure, which changed with the Al layer thickness. The yield stress of the Al layers at ambient temperature was compatible with a deformation mechanism controlled by the interaction of dislocations with grain boundaries for the thicker layers (>50 nm), while confined layer slip appeared to be dominant for layers below 50 nm. There was a dramatic reduction in the Al yield stress with temperature, which increased as the Al layer thickness decreased, and led to an inverse size effect at 100 °C. In conclusion, this behavior was compatible with plastic deformation mechanisms controlled by grain boundary and interface diffusion at 100 °C,more »
- Authors:
-
- IMDEA Materials Institute, Madrid (Spain)
- Arizona State Univ., Tempe, AZ (United States)
- IMDEA Materials Institute, Madrid (Spain); Polytechnic Univ. of Madrid, Madrid (Spain)
- Publication Date:
- Research Org.:
- Los Alamos National Laboratory (LANL), Los Alamos, NM (United States)
- Sponsoring Org.:
- National Science Foundation (NSF); USDOE Office of Science (SC), Basic Energy Sciences (BES); Spanish Ministry of Economy and Competitiveness; Chinese Scholarship Council (CSC); Spanish Ministry of Education
- OSTI Identifier:
- 1418605
- Grant/Contract Number:
- AC52-06NA25396
- Resource Type:
- Accepted Manuscript
- Journal Name:
- Philosophical Magazine (2003, Print)
- Additional Journal Information:
- Journal Name: Philosophical Magazine (2003, Print); Journal Volume: 96; Journal Issue: 32-34; Journal ID: ISSN 1478-6435
- Publisher:
- Taylor & Francis
- Country of Publication:
- United States
- Language:
- English
- Subject:
- 36 MATERIALS SCIENCE; Multilayers; nanoindentation; thin-films; finite element modeling
Citation Formats
Yang, L. W., Mayer, C., Chawla, N., Llorca, J., and Molina-Aldareguía, J. M. Deformation mechanisms of ultra-thin Al layers in Al/SiC nanolaminates as a function of thickness and temperature. United States: N. p., 2016.
Web. doi:10.1080/14786435.2016.1219075.
Yang, L. W., Mayer, C., Chawla, N., Llorca, J., & Molina-Aldareguía, J. M. Deformation mechanisms of ultra-thin Al layers in Al/SiC nanolaminates as a function of thickness and temperature. United States. https://doi.org/10.1080/14786435.2016.1219075
Yang, L. W., Mayer, C., Chawla, N., Llorca, J., and Molina-Aldareguía, J. M. Tue .
"Deformation mechanisms of ultra-thin Al layers in Al/SiC nanolaminates as a function of thickness and temperature". United States. https://doi.org/10.1080/14786435.2016.1219075. https://www.osti.gov/servlets/purl/1418605.
@article{osti_1418605,
title = {Deformation mechanisms of ultra-thin Al layers in Al/SiC nanolaminates as a function of thickness and temperature},
author = {Yang, L. W. and Mayer, C. and Chawla, N. and Llorca, J. and Molina-Aldareguía, J. M.},
abstractNote = {The mechanical properties of Al/SiC nanolaminates with layer thicknesses between 10 and 100 nm were studied by nanoindentation in the temperature range 25 to 100 °C. The strength of the Al layers as a function of the layer thickness and temperature was obtained from the hardness of the nanolaminates by an inverse methodology based on the numerical simulation of the nanoindentation tests by means of the finite element method. The room temperature yield stress of the Al layers showed a large ‘the thinner, the stronger’ effect, which depended not only on the layer thickness but also on the microstructure, which changed with the Al layer thickness. The yield stress of the Al layers at ambient temperature was compatible with a deformation mechanism controlled by the interaction of dislocations with grain boundaries for the thicker layers (>50 nm), while confined layer slip appeared to be dominant for layers below 50 nm. There was a dramatic reduction in the Al yield stress with temperature, which increased as the Al layer thickness decreased, and led to an inverse size effect at 100 °C. In conclusion, this behavior was compatible with plastic deformation mechanisms controlled by grain boundary and interface diffusion at 100 °C, which limit the strength of the ultra-thin Al layers.},
doi = {10.1080/14786435.2016.1219075},
journal = {Philosophical Magazine (2003, Print)},
number = 32-34,
volume = 96,
place = {United States},
year = {Tue Aug 16 00:00:00 EDT 2016},
month = {Tue Aug 16 00:00:00 EDT 2016}
}
Works referenced in this record:
Interface-Driven Plasticity in Metal–Ceramic Nanolayered Composites: Direct Validation of Multiscale Deformation Modeling via In Situ Indentation in TEM
journal, August 2015
- Mara, Nathan A.; Li, Nan; Misra, Amit
- JOM, Vol. 68, Issue 1
Micropillar compression of Al/SiC nanolaminates
journal, December 2010
- Singh, D. R. P.; Chawla, N.; Tang, G.
- Acta Materialia, Vol. 58, Issue 20
Mechanical properties of thin films
journal, November 1989
- Nix, William D.
- Metallurgical Transactions A, Vol. 20, Issue 11
High-temperature nanoindentation behavior of Al/SiC multilayers
journal, August 2012
- Lotfian, S.; Molina-Aldareguia, J. M.; Yazzie, K. E.
- Philosophical Magazine Letters, Vol. 92, Issue 8
Indentation behavior of multilayered thin films: Effects of layer undulation
journal, November 2014
- Jamison, R. D.; Shen, Y. -L.
- Thin Solid Films, Vol. 570
Cyclic indentation behavior of metal–ceramic nanolayered composites
journal, November 2012
- Shen, Y. -L.; Blada, C. B.; Williams, J. J.
- Materials Science and Engineering: A, Vol. 557
In situ transmission electron microscopy study of thermal-stress-induced dislocations in a thin Cu film constrained by a Si substrate
journal, July 2001
- Dehm, G.; Weiss, D.; Arzt, E.
- Materials Science and Engineering: A, Vol. 309-310
Micromechanical and in situ shear testing of Al–SiC nanolaminate composites in a transmission electron microscope (TEM)
journal, January 2015
- Mayer, C.; Li, N.; Mara, N.
- Materials Science and Engineering: A, Vol. 621
Indentation behavior of metal–ceramic multilayers at the nanoscale: Numerical analysis and experimental verification
journal, April 2010
- Tang, G.; Shen, Y. -L.; Singh, D. R. P.
- Acta Materialia, Vol. 58, Issue 6
High temperature micropillar compression of Al/SiC nanolaminates
journal, July 2013
- Lotfian, S.; Rodríguez, M.; Yazzie, K. E.
- Acta Materialia, Vol. 61, Issue 12
Optimum high temperature strength of two-dimensional nanocomposites
journal, November 2013
- Monclús, M. A.; Zheng, S. J.; Mayeur, J. R.
- APL Materials, Vol. 1, Issue 5
Role of interfaces in shock-induced plasticity in Cu/Nb nanolaminates
journal, November 2011
- Han, W. Z.; Misra, A.; Mara, N. A.
- Philosophical Magazine, Vol. 91, Issue 32
Analysis of plastic deformation in nanoscale metallic multilayers with coherent and incoherent interfaces
journal, October 2011
- Zbib, Hussein M.; Overman, Cory T.; Akasheh, Firas
- International Journal of Plasticity, Vol. 27, Issue 10
Microstructure and mechanical properties of physical vapor deposited Cu/W nanoscale multilayers: Influence of layer thickness and temperature
journal, November 2014
- Monclús, M. A.; Karlik, M.; Callisti, M.
- Thin Solid Films, Vol. 571
Length scale-dependent deformation behavior of nanolayered Cu/Zr micropillars
journal, February 2012
- Zhang, J. Y.; Lei, S.; Liu, Y.
- Acta Materialia, Vol. 60, Issue 4
Interface-driven microstructure development and ultra high strength of bulk nanostructured Cu-Nb multilayers fabricated by severe plastic deformation
journal, April 2013
- Beyerlein, Irene J.; Mara, Nathan A.; Carpenter, John S.
- Journal of Materials Research, Vol. 28, Issue 13
Dislocation sources and the flow stress of polycrystalline thin metal films
journal, January 2003
- von Blanckenhagen, Burghard; Gumbsch, Peter; Arzt, Eduard
- Philosophical Magazine Letters, Vol. 83, Issue 1
Failure mechanisms in metal–metal nanolaminates at elevated temperatures: Microcompression of Cu–W multilayers
journal, March 2015
- Wheeler, J. M.; Raghavan, R.; Chawla, V.
- Scripta Materialia, Vol. 98
An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments
journal, June 1992
- Oliver, W. C.; Pharr, G. M.
- Journal of Materials Research, Vol. 7, Issue 06, p. 1564-1583
Microstructural factors controlling the strength and ductility of particle-reinforced metal-matrix composites
journal, January 1998
- Llorca, J.; González, C.
- Journal of the Mechanics and Physics of Solids, Vol. 46, Issue 1
Intrinsic and extrinsic size effects in the deformation of amorphous CuZr/nanocrystalline Cu nanolaminates
journal, November 2014
- Guo, Wei; Jägle, Eric; Yao, Jiahao
- Acta Materialia, Vol. 80
Microcompression study of Al-Nb nanoscale multilayers
journal, January 2012
- Kim, Youbin; Budiman, Arief Suriadi; Baldwin, J. Kevin
- Journal of Materials Research, Vol. 27, Issue 3
Direct Observations of Confined Layer Slip in Cu/Nb Multilayers
journal, October 2012
- Li, Nan; Wang, Jian; Misra, Amit
- Microscopy and Microanalysis, Vol. 18, Issue 5
Effect of layer thickness on the high temperature mechanical properties of Al/SiC nanolaminates
journal, November 2014
- Lotfian, S.; Mayer, C.; Chawla, N.
- Thin Solid Films, Vol. 571
The mechanical properties of laminated microscale composites of Al/Al2O3
journal, March 1990
- Alpas, A. T.; Embury, J. D.; Hardwick, D. A.
- Journal of Materials Science, Vol. 25, Issue 3
The yield stress of polycrystalline thin films
journal, February 1993
- Thompson, C. V.
- Journal of Materials Research, Vol. 8, Issue 2
Yielding and strain hardening of thin metal films on substrates
journal, August 1998
- Nix, William D.
- Scripta Materialia, Vol. 39, Issue 4-5
Nanoindentation and microstructural studies of Al/TiN multilayers with unequal volume fractions
journal, June 2008
- Bhattacharyya, D.; Mara, N. A.; Hoagland, R. G.
- Scripta Materialia, Vol. 58, Issue 11
Microstructure and ultrahigh strength of nanoscale Cu/Nb multilayers
journal, November 2011
- Zhu, X. Y.; Luo, J. T.; Zeng, F.
- Thin Solid Films, Vol. 520, Issue 2
Microstructure and nanoindentation hardness of Al/Al3Sc multilayers
journal, June 2003
- Phillips, M. A.; Clemens, B. M.; Nix, W. D.
- Acta Materialia, Vol. 51, Issue 11
An analysis of the effects of matrix void growth on deformation and ductility in metal-ceramic composites
journal, October 1991
- Llorca, J.; Needleman, A.; Suresh, S.
- Acta Metallurgica et Materialia, Vol. 39, Issue 10
Compressive flow behavior of Al–TiN multilayers at nanometer scale layer thickness
journal, June 2011
- Bhattacharyya, D.; Mara, N. A.; Dickerson, P.
- Acta Materialia, Vol. 59, Issue 10
Orientation dependence of indentation behavior in Al–SiC nanolaminate composites
journal, April 2016
- Mayer, C.; Yang, L. W.; Singh, S. S.
- Materials Letters, Vol. 168
A Model for Boundary Diffusion Controlled Creep in Polycrystalline Materials
journal, June 1963
- Coble, R. L.
- Journal of Applied Physics, Vol. 34, Issue 6
Advanced Engineering Materials
journal, January 1999
- Kalveram, Sandra; Cui, Shaoying
- Wiley-VCH GmbH, Weinheim
Nanoindentation investigation of Ti/TiN multilayers films
journal, June 2000
- Daia, M. Ben; Aubert, P.; Labdi, S.
- Journal of Applied Physics, Vol. 87, Issue 11
Mechanical behavior of nanoscale Cu/PdSi multilayers
journal, August 2013
- Knorr, I.; Cordero, N. M.; Lilleodden, E. T.
- Acta Materialia, Vol. 61, Issue 13
An indentation-based method to determine constituent strengths within nanolayered composites
journal, June 2015
- Gram, Michael D.; Carpenter, John S.; Anderson, Peter M.
- Acta Materialia, Vol. 92
Length-scale-dependent deformation mechanisms in incoherent metallic multilayered composites
journal, October 2005
- Misra, A.; Hirth, J. P.; Hoagland, R. G.
- Acta Materialia, Vol. 53, Issue 18
Indentation mechanics and fracture behavior of metal/ceramic nanolaminate composites
journal, July 2008
- Chawla, N.; Singh, D. R. P.; Shen, Y. -L.
- Journal of Materials Science, Vol. 43, Issue 13
Tip shape effect on hot nanoindentation hardness and modulus measurements
journal, August 2014
- Monclús, Miguel Alberto; Lotfian, Saeid; Molina-Aldareguía, Jon Mikel
- International Journal of Precision Engineering and Manufacturing, Vol. 15, Issue 8
Comparing small scale plasticity of copper-chromium nanolayered and alloyed thin films at elevated temperatures
journal, July 2015
- Raghavan, R.; Harzer, T. P.; Chawla, V.
- Acta Materialia, Vol. 93
Mechanical and adhesion properties of Al/AlN multilayered thin films
journal, November 2000
- Lee, Jeong Hoon; Kim, Won Mok; Lee, Taek Sung
- Surface and Coatings Technology, Vol. 133-134
Multiscale modeling and simulation of deformation in nanoscale metallic multilayer systems
journal, January 2014
- Abdolrahim, Niaz; Zbib, Hussein M.; Bahr, David F.
- International Journal of Plasticity, Vol. 52
Deformability of ultrahigh strength 5nm Cu∕Nb nanolayered composites
journal, June 2008
- Mara, N. A.; Bhattacharyya, D.; Dickerson, P.
- Applied Physics Letters, Vol. 92, Issue 23
Ti/Ti‐N Hf/Hf‐N and W/W‐N multilayer films with high mechanical hardness
journal, August 1992
- Shih, K. K.; Dove, D. B.
- Applied Physics Letters, Vol. 61, Issue 6
Characterization of nanoindentation damage in metal/ceramic multilayered films by transmission electron microscopy (TEM)
journal, May 2010
- Sun, P. L.; Chu, J. P.; Lin, T. Y.
- Materials Science and Engineering: A, Vol. 527, Issue 12
Size effects on yield strength and strain hardening for ultra-thin Cu films with and without passivation: A study by synchrotron and bulge test techniques
journal, June 2008
- Gruber, Patric A.; Böhm, Jochen; Onuseit, Felix
- Acta Materialia, Vol. 56, Issue 10
Works referencing / citing this record:
Elevated and cryogenic temperature micropillar compression of magnesium–niobium multilayer films
journal, May 2019
- Thomas, K.; Mohanty, G.; Wehrs, J.
- Journal of Materials Science, Vol. 54, Issue 15
Serration Behavior of a Zr-Based Metallic Glass Under Different Constrained Loading Conditions
journal, August 2016
- Yang, G. N.; Gu, J. L.; Chen, S. Q.
- Metallurgical and Materials Transactions A, Vol. 47, Issue 11