Towards an advanced reactor network modeling framework for fluidized bed biomass gasification: Incorporating information from detailed CFD simulations

Stark, Addison K.; Altantzis, Christos; Bates, Richard B.; Ghoniem, Ahmed F.

doi:10.1016/j.cej.2016.06.026

Title: Towards an advanced reactor network modeling framework for fluidized bed biomass gasification: Incorporating information from detailed CFD simulations

Full Record
Other Related Research

Authors:: Stark, Addison K.; Altantzis, Christos; Bates, Richard B.; Ghoniem, Ahmed F.

Publication Date:: Tue Nov 01 00:00:00 EDT 2016

Sponsoring Org.:: USDOE

OSTI Identifier:: 1324360

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: Chemical Engineering Journal

Additional Journal Information:: Journal Name: Chemical Engineering Journal Journal Volume: 303 Journal Issue: C; Journal ID: ISSN 1385-8947

Publisher:: Elsevier

Country of Publication:: Switzerland

Language:: English

Citation Formats


                    Stark, Addison K., Altantzis, Christos, Bates, Richard B., and Ghoniem, Ahmed F. Towards an advanced reactor network modeling framework for fluidized bed biomass gasification: Incorporating information from detailed CFD simulations.  Switzerland: N. p., 2016. 
Web.  doi:10.1016/j.cej.2016.06.026.

Copy to clipboard


                    Stark, Addison K., Altantzis, Christos, Bates, Richard B., & Ghoniem, Ahmed F. Towards an advanced reactor network modeling framework for fluidized bed biomass gasification: Incorporating information from detailed CFD simulations.  Switzerland.  https://doi.org/10.1016/j.cej.2016.06.026

Copy to clipboard


                    Stark, Addison K., Altantzis, Christos, Bates, Richard B., and Ghoniem, Ahmed F. Tue .  
"Towards an advanced reactor network modeling framework for fluidized bed biomass gasification: Incorporating information from detailed CFD simulations".  Switzerland.  https://doi.org/10.1016/j.cej.2016.06.026.

Copy to clipboard


                    
@article{osti_1324360,

  title        = {Towards an advanced reactor network modeling framework for fluidized bed biomass gasification: Incorporating information from detailed CFD simulations},

  author       = {Stark, Addison K. and Altantzis, Christos and Bates, Richard B. and Ghoniem, Ahmed F.},

  abstractNote = {},

  doi          = {10.1016/j.cej.2016.06.026},

  journal      = {Chemical Engineering Journal},

  number       = C,

  volume       = 303,

  place        = {Switzerland},

  year         = {Tue Nov 01 00:00:00 EDT 2016},

  month        = {Tue Nov 01 00:00:00 EDT 2016}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Publisher's Version of Record
https://doi.org/10.1016/j.cej.2016.06.026

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 17 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Similar Records in DOE PAGES and OSTI.GOV collections:

Experimental investigation of hardwood air gasification in a pilot scale bubbling fluidized bed reactor and CFD simulation of jet/grid and pressure conditions

Journal Article Nam, Hyungseok ; Rodriguez-Alejandro, David Aaron ; Adhikari, Sushil ; ... - Energy Conversion and Management

Not provided.
https://doi.org/10.1016/j.enconman.2018.05.003
Experimental investigation of hardwood air gasification in a pilot scale bubbling fluidized bed reactor and CFD simulation of jet/grid and pressure conditions

Journal Article Nam, Hyungseok ; Rodriguez-Alejandro, David Aaron ; Adhikari, Sushil ; ... - Energy Conversion and Management

A pilot scale pressurized (50 psi) fluidized bed gasification was performed to investigate the effects of the jet/ grid air ratio (5:95–90:10) and equivalence ratio (ER = 0.23–0.45) on the gasification products such as syngas, tar, contaminant gas, and biochar. There was a noticeable effect of the jet/grid ratios on the syngas concentration. An increase in CO, CH₄, and C₂ gases was obtained at the condition closer to jet/grid = 50:50, whereas a higher jet/grid ratio favored water–gas shift reaction by increasing CO₂ and H₂ gases under the pressurized condition. The highest lower heating value (LHV) of 7.7 MJ/Nm³ wasmore »« less
Cited by 22
https://doi.org/10.1016/j.enconman.2018.05.003

Full Text Available
Complex reaction in fluidized beds. Simulation of gasification. [Mathematical model of fluidized bed reactor for gasification of coal with O or water; good agreement with reported data] (in Japanese)

Journal Article Yoshida, K ; Kunii, D - J. Chem. Eng. Jpn.
https://doi.org/10.1252/jcej.7.34
Enriched hydrogen production over air and air-steam fluidized bed gasification in a bubbling fluidized bed reactor with CaO: Effects of biomass and bed material catalyst

Journal Article Nam, Hyungseok ; Wang, Shuang ; Sanjeev, K. C. ; ... - Energy Conversion and Management

Gasification is one of the methods of generating biopower or biofuels from biomass waste. In this study, a benchscale fluidized bed reactor was used for biomass air and air-steam gasification. Gasification was performed under constant operating conditions (~780 °C, equivalence ratio = ~0.32) to investigate the effect of biomass (switchgrass, pine residues) and bed materials (sand, CaO+ sand, Al₂O₃, and CaO + Al₂O₃). All gasification products, such as synthesis gas (syngas), contaminant gases, tar, and biochar (solid) were comprehensively analyzed. The composition of biomass significantly impacted CO and H₂ yield from volatile combustible matter and fixed carbon. Further, the presencemore »« less
Cited by 32
https://doi.org/10.1016/j.enconman.2020.113408

Full Text Available
Coupling DAEM and CFD for simulating biomass fast pyrolysis in fluidized beds

Journal Article Xiong, Qingang ; Zhang, Jingchao ; Wiggins, Gavin ; ... - Journal of Analytical and Applied Pyrolysis

We report results from computational simulations of an experimental, lab-scale bubbling bed biomass pyrolysis reactor that include a distributed activation energy model (DAEM) for the kinetics. In this study, we utilized multiphase computational fluid dynamics (CFD) to account for the turbulent hydrodynamics, and this was combined with the DAEM kinetics in a multi-component, multi-step reaction network. Our results indicate that it is possible to numerically integrate the coupled CFD–DAEM system without significantly increasing computational overhead. It is also clear, however, that reactor operating conditions, reaction kinetics, and multiphase flow dynamics all have major impacts on the pyrolysis products exiting themore »« less
Cited by 63
https://doi.org/10.1016/j.jaap.2015.11.015

Full Text Available

Similar Records