Microstructure, welding mechanism, and failure of Al/Cu ultrasonic welds

Wu, Xin; Liu, Teng; Cai, Wayne

doi:10.1016/j.jmapro.2015.05.003

Title: Microstructure, welding mechanism, and failure of Al/Cu ultrasonic welds

Full Record
Other Related Research

Authors:: Wu, Xin; Liu, Teng; Cai, Wayne

Publication Date:: Thu Oct 01 00:00:00 EDT 2015

Sponsoring Org.:: USDOE

OSTI Identifier:: 1253222

Grant/Contract Number:: EE0002217

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: Journal of Manufacturing Processes

Additional Journal Information:: Journal Name: Journal of Manufacturing Processes Journal Volume: 20 Journal Issue: P3; Journal ID: ISSN 1526-6125

Publisher:: Elsevier

Country of Publication:: United States

Language:: English

Citation Formats


                    Wu, Xin, Liu, Teng, and Cai, Wayne. Microstructure, welding mechanism, and failure of Al/Cu ultrasonic welds.  United States: N. p., 2015. 
Web.  doi:10.1016/j.jmapro.2015.05.003.

Copy to clipboard


                    Wu, Xin, Liu, Teng, & Cai, Wayne. Microstructure, welding mechanism, and failure of Al/Cu ultrasonic welds.  United States.  https://doi.org/10.1016/j.jmapro.2015.05.003

Copy to clipboard


                    Wu, Xin, Liu, Teng, and Cai, Wayne. Thu .  
"Microstructure, welding mechanism, and failure of Al/Cu ultrasonic welds".  United States.  https://doi.org/10.1016/j.jmapro.2015.05.003.

Copy to clipboard


                    
@article{osti_1253222,

  title        = {Microstructure, welding mechanism, and failure of Al/Cu ultrasonic welds},

  author       = {Wu, Xin and Liu, Teng and Cai, Wayne},

  abstractNote = {},

  doi          = {10.1016/j.jmapro.2015.05.003},

  journal      = {Journal of Manufacturing Processes},

  number       = P3,

  volume       = 20,

  place        = {United States},

  year         = {Thu Oct 01 00:00:00 EDT 2015},

  month        = {Thu Oct 01 00:00:00 EDT 2015}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Publisher's Version of Record
https://doi.org/10.1016/j.jmapro.2015.05.003

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 13 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Similar Records in DOE PAGES and OSTI.GOV collections:

Microstructure, welding mechanism, and failure of Al/Cu ultrasonic welds

Journal Article Wu, Xin ; Liu, Teng ; Cai, Wayne - Journal of Manufacturing Processes
Cited by 46
https://doi.org/10.1016/j.jmapro.2015.06.002
Interfacial microstructure evolution and weld formation during ultrasonic welding of Al alloy to Cu

Journal Article Fujii, H.T., E-mail: fujii@material.tohoku.ac.jp ; Endo, H. ; Sato, Y. S. ; ... - Materials Characterization

Highlights: • Surface oxide layer was fractured and dispersed around the weld interface during ultrasonic welding of Al alloy to Cu. • Mechanical mixing around the weld interface was caused by compressive deformation with ultrasonic vibration. • Once micro-bonds were generated between Al and Cu, shear deformation occurred around the weld interface. • Enhanced Cu diffusion into Al in the severely deformed region significantly contributed to the weld formation. - Abstract: Dissimilar welds of Al alloy 1050 to Cu were prepared via ultrasonic spot welding in order to understand the formation of welds and interfacial microstructures. To observe oxide layermore »« less
https://doi.org/10.1016/J.MATCHAR.2018.03.010
Effects of Rotation Speed on Microstructure and Mechanical Properties of 2060 Al-Cu-Li Alloy in Friction Stir Welding

Journal Article Yan, Keng ; Wang, Tianyu ; Liang, Haimei ; ... - Journal of Materials Engineering and Performance

Microstructural and mechanical properties of 2.0-mm-thick 2060 Al-Cu-Li alloy joints obtained at different rotation speeds were assessed in this study. The rotation speeds ranged from 400 to 1300 rpm, with welding speed kept at a constant value of 100 mm/min. With the increase in rotation speed, grain coarsening occurred while the density of precipitation decreased in the stir zone (SZ), and great amounts of the Al{sub 2}CuLi and Al{sub 2}Cu phases were dissolved while only small amounts of the Al{sub 3}Zr and Al{sub 3}Li phases remained. The lowest hardness was found at the interface between the heat-affected zone (HAZ) and thermo-mechanically affectedmore »« less
https://doi.org/10.1007/S11665-018-3650-X
Microstructural and mechanical characterization of CO{sub 2} laser and gas tungsten arc welds of an Al-Li-Cu alloy 2195

Conference Hou, K H ; Baeslack, III, W A ; Szabo, A

Lithium-containing aluminum alloys offer an attractive combination of low density and high strength and stiffness and have been the focus of vigorous research for their promising aerospace applications. To achieve the full potential advantages in using these alloys, the integrity of welded joints, both n the fusion zone and the heat-affected zone, must be ensured. In the present study, Weldalite{sup TM} 049 (designated as alloy 2195) with nominal composition of Al-1.0Li-4.0Cu-0.4Mg0.4Ag-0.14Zr (wt%) was welded autogenously using the gas tungsten-arc (GTA) and CO{sub 2} laser beam (LB) welding processes. The average ultimate tensile strengths for as-welded, 160{degrees}C/16 h-aged, and 190{degrees}C/16 h-agedmore »« less
Evaluation of microstructure stability at the interfaces of Al-6061 welds fabricated using ultrasonic additive manufacturing

Journal Article Sridharan, Niyanth S. ; Gussev, Maxim N. ; Parish, Chad M. ; ... - Materials Characterization

Here, ultrasonic additive manufacturing (UAM) is a solid-state additive manufacturing process that uses fundamental principles of ultrasonic welding and sequential layering of tapes to fabricate complex three-dimensional (3-D) components. One of the factors limiting the use of this technology is the poor tensile strength along the z-axis. Recent work has demonstrated the improvement of the z-axis properties after post-processing treatments. The abnormally high stability of the grains at the interface during post-weld heat treatments is, however, not yet well understood. In this work we use multiscale characterization to understand the stability of the grains during post-weld heat treatments. Aluminum alloymore »« less
Cited by 23
https://doi.org/10.1016/j.matchar.2018.02.043

Full Text Available

Similar Records