The influence of ion beam rastering on the swelling of self-ion irradiated pure iron at 450 °C

Gigax, Jonathan G.; Aydogan, Eda; Chen, Tianyi; Chen, Di; Shao, Lin; Wu, Y.; Lo, W. Y.; Yang, Y.; Garner, F. A.

doi:10.1016/j.jnucmat.2015.05.025

Title: The influence of ion beam rastering on the swelling of self-ion irradiated pure iron at 450 °C

Full Record
Other Related Research

Authors:: Gigax, Jonathan G.; Aydogan, Eda; Chen, Tianyi; Chen, Di; Shao, Lin; Wu, Y.; Lo, W. Y.; Yang, Y.; Garner, F. A.

Publication Date:: Thu Oct 01 00:00:00 EDT 2015

Sponsoring Org.:: USDOE

OSTI Identifier:: 1251993

Grant/Contract Number:: NE0008297

Resource Type:: Publisher's Accepted Manuscript

Journal Name:: Journal of Nuclear Materials

Additional Journal Information:: Journal Name: Journal of Nuclear Materials Journal Volume: 465 Journal Issue: C; Journal ID: ISSN 0022-3115

Publisher:: Elsevier

Country of Publication:: Netherlands

Language:: English

Citation Formats


                    Gigax, Jonathan G., Aydogan, Eda, Chen, Tianyi, Chen, Di, Shao, Lin, Wu, Y., Lo, W. Y., Yang, Y., and Garner, F. A. The influence of ion beam rastering on the swelling of self-ion irradiated pure iron at 450 °C.  Netherlands: N. p., 2015. 
Web.  doi:10.1016/j.jnucmat.2015.05.025.

Copy to clipboard


                    Gigax, Jonathan G., Aydogan, Eda, Chen, Tianyi, Chen, Di, Shao, Lin, Wu, Y., Lo, W. Y., Yang, Y., & Garner, F. A. The influence of ion beam rastering on the swelling of self-ion irradiated pure iron at 450 °C.  Netherlands.  https://doi.org/10.1016/j.jnucmat.2015.05.025

Copy to clipboard


                    Gigax, Jonathan G., Aydogan, Eda, Chen, Tianyi, Chen, Di, Shao, Lin, Wu, Y., Lo, W. Y., Yang, Y., and Garner, F. A. Thu .  
"The influence of ion beam rastering on the swelling of self-ion irradiated pure iron at 450 °C".  Netherlands.  https://doi.org/10.1016/j.jnucmat.2015.05.025.

Copy to clipboard


                    
@article{osti_1251993,

  title        = {The influence of ion beam rastering on the swelling of self-ion irradiated pure iron at 450 °C},

  author       = {Gigax, Jonathan G. and Aydogan, Eda and Chen, Tianyi and Chen, Di and Shao, Lin and Wu, Y. and Lo, W. Y. and Yang, Y. and Garner, F. A.},

  abstractNote = {},

  doi          = {10.1016/j.jnucmat.2015.05.025},

  journal      = {Journal of Nuclear Materials},

  number       = C,

  volume       = 465,

  place        = {Netherlands},

  year         = {Thu Oct 01 00:00:00 EDT 2015},

  month        = {Thu Oct 01 00:00:00 EDT 2015}

}

Copy to clipboard

Journal Article:

Free Publicly Available Full Text

Accepted Manuscript (Publisher)

Publisher's Version of Record
https://doi.org/10.1016/j.jnucmat.2015.05.025

Other availability

Search WorldCat to find libraries that may hold this journal

Citation Metrics:

Cited by: 59 works

Citation information provided by
Web of Science

Save / Share:

Export Metadata

Save to My Library

Similar Records in DOE PAGES and OSTI.GOV collections:

Irradiation-induced swelling of pure chromium with 5 MeV Fe ions in the temperature range 450–650 °C

Journal Article Kim, Hyosim ; Ryabikovskaya, Ekaterina ; French, Aaron ; ... - Journal of Nuclear Materials

A surface coating using pure chromium has been proposed to increase the accident tolerance of Zircaloy cladding in pressurized water reactors. However, there is not much irradiation experience with Cr alloys and especially pure Cr. In the present study, pure chromium was irradiated with 5 MeV Fe ions to 50 peak dpa (displacements per atom) at temperatures of 450, 500, 550, 600 and 650 °C. Then irradiation at the peak swelling temperature of 550 °C was conducted to 50, 100, 150 peak dpa. Swelling at 50 dpa was observed over the entire temperature range studied, 450–650 °C, but appeared to be decreasing strongly at the temperature boundaries of the experiment. After an initial transient of rapid swelling, chromium was observed to swell at a rate of ~0.03–0.04%/dpa (up to 120 local dpa), which is much lower than pure Fe at 0.2%/dpa. This low swelling rate was found to be relatively insensitive to dpa rate, which varied by a factor of ~2 over the depth of data collection. Here, swelling was observed to begin quickly with an incubation period less than 10 dpa. Self-organization in the form of void ordering was observed to be developing at 50 dpa, becoming better defined with increasing dose. The void alignment direction is determined to be themore »« less
https://doi.org/10.1016/j.jnucmat.2020.152585

Full Text Available
Effect of defect imbalance on void swelling distributions produced in pure iron irradiated with 3.5 MeV self-ions

Journal Article Shao, Lin ; Wei, C. -C. ; Gigax, J. ; ... - Journal of Nuclear Materials

Ion irradiation has been widely used to simulate radiation damage induced by neutrons. However, there are a number of features of ion-induced damage that differ from neutron-induced damage, and these differences require investigation before behavior arising from neutron bombardment can be confidently predicted from ion data. In this study 3.5 MeV self-ion irradiation of pure iron was used to study the influence on void swelling of the depth-dependent defect imbalance between vacancies and interstitials that arises from various surface effects, forward scattering of displaced atoms, and especially the injected interstitial effect. The depth dependence of void swelling was observed notmore »« less
Cited by 86
https://doi.org/10.1016/j.jnucmat.2014.06.002

Full Text Available
Swelling of pure copper and copper alloys after high fluence irradiation in FFTF (Fast Flux Test Facility) at approximately 450/sup 0/C

Technical Report Garner, F A ; Brager, H R

The swelling of pure copper and various copper-base alloys has been determined at 47.2 dpa after irradiation in FFTF-MOTA at approx.450/sup 0/C. Data are also becoming available at 63.3 dpa. The alloys tend to fall into two broad categories, those that swell appreciably, sometimes with an S-shaped behavior, and those that resist swelling to very high neutron exposures. It appears that copper may have an intrinsic swelling rate of approx.1%/dpa that is often not reached due to its tendency toward saturation of swelling. The most swelling-resistant alloys examined to date are CuAl25, MZC and Cu-2.0Be.
Influence of injected interstitials on the void swelling in two structural variants of 304L stainless steel induced by self-ion irradiation at 500 °C

Journal Article Sun, C. ; Garner, F. A. ; Shao, L. ; ... - Nuclear Instruments and Methods in Physics Research. Section B, Beam Interactions with Materials and Atoms

The two variants of AISI 304L stainless steel (SS) with different grain size distributions were ion irradiated at 500 °C to a peak dose of ~60 dpa. In the coarse-grained annealed variant, a peak swelling of ~12% was observed closer to the specimen surface rather than at the depth of peak displacement damage. The forward shift in depth between peak swelling and peak dose is proposed to be a consequence of suppression of void nucleation by injected interstitials. The swelling behavior in the front portion of the ion range mirrors that of neutron-induced swelling in this steel, exhibiting significant curvaturemore »« less
Cited by 18
https://doi.org/10.1016/j.nimb.2017.03.070

Full Text Available
Microstructural changes and void swelling of a 12Cr ODS ferritic-martensitic alloy after high-dpa self-ion irradiation

Journal Article Chen, Tianyi ; Aydogan, Eda ; Gigax, Jonathan G. ; ... - Journal of Nuclear Materials
Cited by 64
https://doi.org/10.1016/j.jnucmat.2015.09.016

Similar Records