skip to main content

DOE PAGESDOE PAGES

Title: Liquid–liquid mixing studies in annular centrifugal contactors comparing stationary mixing vane options

Comparative studies of multiphase operation of an annular centrifugal contactor show the impact of housing stationary mixing vane configuration. A number of experimental results for several different mixing vane options are reported for operation of a 12.5 cm engineering-scale contactor unit. Fewer straight vanes give greater mixing-zone hold-up compared to curved vanes. Quantitative comparison of droplet size distribution also showed a significant decrease in mean diameter for four straight vanes versus eight curved vanes. This set of measurements gives a compelling case for careful consideration of mixing vane geometry when evaluating hydraulic operation and extraction process efficiency of annular centrifugal contactors.
Authors:
 [1]
  1. Argonne National Lab., Argonne, IL (United States). Chemical Sciences and Engineering Div.
Publication Date:
OSTI Identifier:
1221539
Grant/Contract Number:
AC02-06CH11357
Type:
Accepted Manuscript
Journal Name:
Solvent Extraction and Ion Exchange
Additional Journal Information:
Journal Volume: 80; Journal Issue: 4; Journal ID: ISSN 0736-6299
Publisher:
Taylor and Francis
Research Org:
Argonne National Laboratory (ANL), Argonne, IL (United States)
Sponsoring Org:
USDOE Office of Nuclear Energy (NE)
Country of Publication:
United States
Language:
English
Subject:
42 ENGINEERING; 11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS; 37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CHEMISTRY annular centrifugal contactors; liquid-liquid extraction; nuclear fuel cycle; nuclear separations