National Library of Energy BETA

Sample records for year low-temperature collectors

  1. Solar collectors

    SciTech Connect (OSTI)

    Cassidy, V.M.

    1981-11-01

    Practical applications of solar energy in commercial, industrial and institutional buildings are considered. Two main types of solar collectors are described: flat plate collectors and concentrating collectors. Efficiency of air and hydronic collectors among the flat plate types are compared. Also several concentrators are described, including their sun tracking mechanisms. Descriptions of some recent solar installations are presented and a list representing the cross section of solar collector manufacturers is furnished.

  2. Heat collector

    DOE Patents [OSTI]

    Merrigan, M.A.

    1981-06-29

    A heat collector and method suitable for efficiently and cheaply collecting solar and other thermal energy are provided. The collector employs a heat pipe in a gravity-assist mode and is not evacuated. The collector has many advantages, some of which include ease of assembly, reduced structural stresses on the heat pipe enclosure, and a low total materials cost requirement. Natural convective forces drive the collector, which after startup operates entirely passively due in part to differences in molecular weights of gaseous components within the collector.

  3. Heat collector

    DOE Patents [OSTI]

    Merrigan, Michael A. (Santa Cruz, NM)

    1984-01-01

    A heat collector and method suitable for efficiently and cheaply collecting solar and other thermal energy are provided. The collector employs a heat pipe in a gravity-assist mode and is not evacuated. The collector has many advantages, some of which include ease of assembly, reduced structural stresses on the heat pipe enclosure, and a low total materials cost requirement. Natural convective forces drive the collector, which after startup operates entirely passively due in part to differences in molecular weights of gaseous components within the collector.

  4. Burgett Geothermal Greenhouses Greenhouse Low Temperature Geothermal...

    Open Energy Info (EERE)

    Burgett Geothermal Greenhouses Greenhouse Low Temperature Geothermal Facility Jump to: navigation, search Name Burgett Geothermal Greenhouses Greenhouse Low Temperature Geothermal...

  5. Research Initiative Will Demonstrate Low Temperature Geothermal...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Research Initiative Will Demonstrate Low Temperature Geothermal Electrical Power Generation Systems Using Oilfield Fluids Research Initiative Will Demonstrate Low Temperature...

  6. LOW TEMPERATURE PHYSICS RADIATION EFFECTS ON

    E-Print Network [OSTI]

    McDonald, Kirk

    LOW TEMPERATURE PHYSICS RADIATION EFFECTS ON FUSION MAGNET COMPONENTS ­ 1: SUPERCONDUCTORS Harald W, Austria Introduction: The ITER-Magnets, Neutron Spectra Low Temperature Superconductors Stabilizer HTS Conclusions WAMSDO Workshop, Geneva 14 November 2011 #12;LOW TEMPERATURE PHYSICS Overview: ITER 300

  7. Solar collector

    SciTech Connect (OSTI)

    Wilhelm, W.G.

    1982-05-04

    The field of this invention is solar collectors, and more particularly, the invention pertains to a flat plate collector that employs high performance thin films. The solar collector of this invention overcomes several problems in this field, such as excessive hardware, cost and reliability, and other prior art drawbacks outlined in the specification. In the preferred form, the apparatus features a substantially rigid planar frame. A thin film window is bonded to one planar side of the frame. An absorber of laminate construction is comprised of two thin film layers that are sealed perimetrically. The layers define a fluid-tight planar envelope of large surface area to volume through which a heat transfer fluid flows. Absorber is bonded to the other planar side of the frame. The thin film construction of the absorber assures substantially full envelope wetting and thus good efficiency. The window and absorber films stress the frame adding to the overall strength of the collector.

  8. Low-temperature magnetic refrigerator

    DOE Patents [OSTI]

    Barclay, J.A.

    1983-05-26

    The invention relates to magnetic refrigeration and more particularly to low temperature refrigeration between about 4 and about 20 K, with an apparatus and method utilizing a belt of magnetic material passed in and out of a magnetic field with heat exchangers within and outside the field operably disposed to accomplish refrigeration.

  9. Low-temperature magnetic refrigerator

    DOE Patents [OSTI]

    Barclay, John A. (Los Alamos, NM)

    1985-01-01

    The disclosure is directed to a low temperature 4 to 20 K. refrigeration apparatus and method utilizing a ring of magnetic material moving through a magnetic field. Heat exchange is accomplished in and out of the magnetic field to appropriately utilize the device to execute Carnot and Stirling cycles.

  10. Performance evaluation of a low-temperature solar Rankine cycle system utilizing R245fa

    SciTech Connect (OSTI)

    Wang, X.D.; Zhao, L.; Wang, J.L.; Zhang, W.Z.; Zhao, X.Z.; Wu, W.

    2010-03-15

    A low-temperature solar Rankine system utilizing R245fa as the working fluid is proposed and an experimental system is designed, constructed and tested. Both the evacuated solar collectors and the flat plate solar collectors are used in the experimental system; meanwhile, a rolling-piston R245fa expander is also mounted in the system. The new designed R245fa expander works stably in the experiment, with an average expansion power output of 1.73 kW and an average isentropic efficiency of 45.2%. The overall power generation efficiency estimated is 4.2%, when the evacuated solar collector is utilized in the system, and with the condition of flat plate solar collector, it is about 3.2%. The experimental results show that using R245fa as working fluid in the low-temperature solar power Rankine cycle system is feasible and the performance is acceptable. (author)

  11. Optimizing Low Temperature Diesel Combustion | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Optimizing Low Temperature Diesel Combustion Optimizing Low Temperature Diesel Combustion Presentation from the U.S. DOE Office of Vehicle Technologies "Mega" Merit Review 2008 on...

  12. Advanced Low Temperature Absorption Chiller Module Integrated...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Low Temperature Absorption Chiller Module Integrated with a CHP System at a Distributed Data Center - Presentation by Exergy Partners Corp., June 2011 Advanced Low Temperature...

  13. Litchfield Correctional Center District Heating Low Temperature...

    Open Energy Info (EERE)

    Litchfield Correctional Center District Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Litchfield Correctional Center District Heating Low Temperature...

  14. Susanville District Heating District Heating Low Temperature...

    Open Energy Info (EERE)

    Susanville District Heating District Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Susanville District Heating District Heating Low Temperature...

  15. Geothermal Food Processors Agricultural Drying Low Temperature...

    Open Energy Info (EERE)

    Geothermal Food Processors Agricultural Drying Low Temperature Geothermal Facility Jump to: navigation, search Name Geothermal Food Processors Agricultural Drying Low Temperature...

  16. Thermodynamic Advantages of Low Temperature Combustion Engines...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advantages of Low Temperature Combustion Engines Including the Use of Low Heat Rejection Concepts Thermodynamic Advantages of Low Temperature Combustion Engines Including the Use...

  17. Solar collector

    DOE Patents [OSTI]

    Wilhelm, William G. (Cutchogue, NY)

    1982-01-01

    The field of this invention is solar collectors, and more particularly, the invention pertains to a flat plate collector that employs high performance thin films. The solar collector of this invention overcomes several problems in this field, such as excessive hardware, cost and reliability, and other prior art drawbacks outlined in the specification. In the preferred form, the apparatus features a substantially rigid planar frame (14). A thin film window (42) is bonded to one planar side of the frame. An absorber (24) of laminate construction is comprised of two thin film layers (24a, 24b) that are sealed perimetrically. The layers (24a, 24b) define a fluid-tight planar envelope (24c) of large surface area to volume through which a heat transfer fluid flows. Absorber (24) is bonded to the other planar side of the frame. The thin film construction of the absorber assures substantially full envelope wetting and thus good efficiency. The window and absorber films stress the frame adding to the overall strength of the collector.

  18. LOW TEMPERATURE PHYSICS RADIATION EFFECTS ON HIGH

    E-Print Network [OSTI]

    McDonald, Kirk

    LOW TEMPERATURE PHYSICS RADIATION EFFECTS ON HIGH TEMPERATURE SUPERCONDUCTORS Harald W. Weber-induced Defects in HTS Practical Materials HTS4Fusion Conductor Workshop, KIT, 27 May 2011 #12;LOW TEMPERATURE;LOW TEMPERATURE PHYSICS Options / Materials "Demo" design (magnetic field, temperature, fluence

  19. LOW TEMPERATURE PHYSICS RADIATION EFFECTS ON

    E-Print Network [OSTI]

    McDonald, Kirk

    LOW TEMPERATURE PHYSICS RADIATION EFFECTS ON FUSION MAGNET COMPONENTS Harald W. Weber Vienna Stabilizer Insulation Conclusions ESS, 4th High Power Targetry Workshop, Malmö 5 May 2011 #12;LOW TEMPERATURE PHYSICS Overview: ITER 300-500 s INTRODUCTION #12;LOW TEMPERATURE PHYSICS ITER Magnet System (5 K / 6.5 K

  20. Low-Temperature Geothermal Projects Nationwide

    SciTech Connect (OSTI)

    DOE Geothermal Technologies

    2013-04-01

    Poster of low-temperature and co-produced geothermal projects nationwide. This map poster summarizes completed, ongoing and proposed projects for FY14.

  1. Low Temperature Performance Characterization | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Characterization Low Temperature Performance Characterization Presentation from the U.S. DOE Office of Vehicle Technologies "Mega" Merit Review 2008 on February 25, 2008 in...

  2. Low Temperature/Coproduced/Geopressured Subprogram Overview ...

    Broader source: Energy.gov (indexed) [DOE]

    This overview of GTP's Low TemperatureCoproducedGeopressured subprogram was given at GTP's Program Peer Review on May 18, 2010. overviewlowtemp.pdf More Documents & Publications...

  3. Geothermal Energy Production from Low Temperature Resources,...

    Open Energy Info (EERE)

    Geothermal Energy Production from Low Temperature Resources, Coproduced Fluids from Oil and Gas Wells, and Geopressured Resources Jump to: navigation, search Geothermal ARRA...

  4. Biodiesel's Enabling Characteristics in Attaining Low Temperature...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Combustion Discusses reasons and physical significance of cool-flame behavior of biodiesel on improving low temperature diesel combustion deer11jacobs.pdf More Documents &...

  5. Low Temperature Catalyst for Fuel Injection System

    Broader source: Energy.gov [DOE]

    A low temperature oxidation catalyst applied to a DOC and DPF combined with a unique fuel injection system remove soot from a diesel exhaust system.

  6. Field Demonstration of High Efficiency Ultra-Low-Temperature...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ultra-Low-Temperature Laboratory Freezers Field Demonstration of High Efficiency Ultra-Low-Temperature Laboratory Freezers Ultra-low temperature laboratory freezers (ULTs) are some...

  7. Multicylinder Diesel Engine for Low Temperature Combustion Operation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for Low Temperature Combustion Operation Multicylinder Diesel Engine for Low Temperature Combustion Operation Fuel injection strategies to extend low temperature combustion...

  8. Develop NREL Center for Low Temperature Research/Project Data...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Develop NREL Center for Low Temperature ResearchProject Data Collection Develop NREL Center for Low Temperature ResearchProject Data Collection Project objective: Low-Temperature...

  9. Relaxation calorimetry technique for measuring low temperature specific heat

    E-Print Network [OSTI]

    Andrei, Eva Y.

    Relaxation calorimetry technique for measuring low temperature specific heat R. W. Newsome, Jr the temperature dependence of the specific heat of a 10 thick 0.62 mg copolymer film of vinylidene fluoride. INTRODUCTION Design improvements over recent years enable some calorimeters to precisely measure the specific

  10. Basics of Low-temperature Refrigeration

    E-Print Network [OSTI]

    Alekseev, A

    2014-01-01

    This chapter gives an overview of the principles of low temperature refrigeration and the thermodynamics behind it. Basic cryogenic processes - Joule-Thomoson process, Brayton process as well as Claude process - are described and compared. A typical helium laboratory refrigerator based on Claude process is used as a typical example of a low-temperature refrigeration system. A description of the hardware components for helium liquefaction is an important part of this paper, because the design of the main hardware components (compressors, turbines, heat exchangers, pumps, adsorbers, etc.) provides the input for cost calculation, as well as enables to estimate the reliability of the plant and the maintenance expenses. All these numbers are necessary to calculate the economics of a low temperature application.

  11. Low temperature monitoring system for subsurface barriers

    DOE Patents [OSTI]

    Vinegar, Harold J. (Bellaire, TX); McKinzie, II. Billy John (Houston, TX)

    2009-08-18

    A system for monitoring temperature of a subsurface low temperature zone is described. The system includes a plurality of freeze wells configured to form the low temperature zone, one or more lasers, and a fiber optic cable coupled to at least one laser. A portion of the fiber optic cable is positioned in at least one freeze well. At least one laser is configured to transmit light pulses into a first end of the fiber optic cable. An analyzer is coupled to the fiber optic cable. The analyzer is configured to receive return signals from the light pulses.

  12. Low Temperature Heat Recovery for Boiler Systems 

    E-Print Network [OSTI]

    Shook, J. R.; Luttenberger, D. B.

    1986-01-01

    stream_source_info ESL-IE-86-06-70.pdf.txt stream_content_type text/plain stream_size 27871 Content-Encoding ISO-8859-1 stream_name ESL-IE-86-06-70.pdf.txt Content-Type text/plain; charset=ISO-8859-1 LOW TEMPERATURE HEAT... RECOVERY FOR BOILER SYSTEMS James R. Shook & David B. Luttenberger FLUE GAS RESOURCES, INC. Toledo, Ohio ABSTRACT Low temperature corrosion proof heat exchangers desbgned to reduce boiler flue gas temperatures to 170 F or lower are now being...

  13. High Country Rose Greenhouses Greenhouse Low Temperature Geothermal...

    Open Energy Info (EERE)

    High Country Rose Greenhouses Greenhouse Low Temperature Geothermal Facility Jump to: navigation, search Name High Country Rose Greenhouses Greenhouse Low Temperature Geothermal...

  14. Osmotic Heat Engine for Energy Production from Low Temperature...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Osmotic Heat Engine for Energy Production from Low Temperature Geothemal Resources Osmotic Heat Engine for Energy Production from Low Temperature Geothemal Resources Osmotic Heat...

  15. Roadmap Finalized for Low-Temperature, Coproduced, and Geopressured...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Roadmap Finalized for Low-Temperature, Coproduced, and Geopressured Technologies Roadmap Finalized for Low-Temperature, Coproduced, and Geopressured Technologies March 23, 2011 -...

  16. Detailed Assessment of Particulate Characteristics from Low-Temperatur...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Assessment of Particulate Characteristics from Low-Temperature Combustion Engines Detailed Assessment of Particulate Characteristics from Low-Temperature Combustion Engines 2012...

  17. Enhanced High and Low Temperature Performance of NOx Reduction...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Low Temperature Performance of NOx Reduction Materials Enhanced High and Low Temperature Performance of NOx Reduction Materials 2013 DOE Hydrogen and Fuel Cells Program and...

  18. Calistoga Private and Commercial Industrial Low Temperature Geothermal...

    Open Energy Info (EERE)

    Calistoga Private and Commercial Industrial Low Temperature Geothermal Facility Jump to: navigation, search Name Calistoga Private and Commercial Industrial Low Temperature...

  19. Low-Temperature, Coproduced, and Geopressured Geothermal Power...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Low-Temperature, Coproduced, and Geopressured Geothermal Power Low-Temperature, Coproduced, and Geopressured Geothermal Power The Geothermal Technology Program (GTP)...

  20. Low Temperature Heat Release Behavior of Conventional and Alternative...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Low Temperature Heat Release Behavior of Conventional and Alternative Fuels in a Motored Engine Low Temperature Heat Release Behavior of Conventional and Alternative Fuels in a...

  1. Analysis of Low-Temperature Utilization of Geothermal Resources...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Low-Temperature Utilization of Geothermal Resources Analysis of Low-Temperature Utilization of Geothermal Resources Project objectives: Techno-economic analysis of the potential of...

  2. Low-temperature plasma-deposited silicon epitaxial films: Growth...

    Office of Scientific and Technical Information (OSTI)

    Low-temperature plasma-deposited silicon epitaxial films: Growth and properties Citation Details In-Document Search Title: Low-temperature plasma-deposited silicon epitaxial films:...

  3. Full Reviews: Low-temperature and Exploration Demonstration Projects...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Low-temperature and Exploration Demonstration Projects Full Reviews: Low-temperature and Exploration Demonstration Projects Below are the project presentations and respective peer...

  4. Astoria Mineral Hot Springs Pool & Spa Low Temperature Geothermal...

    Open Energy Info (EERE)

    Astoria Mineral Hot Springs Pool & Spa Low Temperature Geothermal Facility Jump to: navigation, search Name Astoria Mineral Hot Springs Pool & Spa Low Temperature Geothermal...

  5. Homestead Crater Scuba Dive Pool Pool & Spa Low Temperature Geothermal...

    Open Energy Info (EERE)

    Crater Scuba Dive Pool Pool & Spa Low Temperature Geothermal Facility Jump to: navigation, search Name Homestead Crater Scuba Dive Pool Pool & Spa Low Temperature Geothermal...

  6. Paraiso Hot Springs Resort Pool & Spa Low Temperature Geothermal...

    Open Energy Info (EERE)

    Paraiso Hot Springs Resort Pool & Spa Low Temperature Geothermal Facility Jump to: navigation, search Name Paraiso Hot Springs Resort Pool & Spa Low Temperature Geothermal Facility...

  7. Caliente Hot Springs Motel Pool & Spa Low Temperature Geothermal...

    Open Energy Info (EERE)

    Hot Springs Motel Pool & Spa Low Temperature Geothermal Facility Jump to: navigation, search Name Caliente Hot Springs Motel Pool & Spa Low Temperature Geothermal Facility Facility...

  8. Democrat Hot Springs Resort Pool & Spa Low Temperature Geothermal...

    Open Energy Info (EERE)

    Democrat Hot Springs Resort Pool & Spa Low Temperature Geothermal Facility Jump to: navigation, search Name Democrat Hot Springs Resort Pool & Spa Low Temperature Geothermal...

  9. Tassajara Buddhist Meditation Pool & Spa Low Temperature Geothermal...

    Open Energy Info (EERE)

    Tassajara Buddhist Meditation Pool & Spa Low Temperature Geothermal Facility Jump to: navigation, search Name Tassajara Buddhist Meditation Pool & Spa Low Temperature Geothermal...

  10. Camperworld Hot Springs SCUBA Dive Pool Pool & Spa Low Temperature...

    Open Energy Info (EERE)

    SCUBA Dive Pool Pool & Spa Low Temperature Geothermal Facility Jump to: navigation, search Name Camperworld Hot Springs SCUBA Dive Pool Pool & Spa Low Temperature Geothermal...

  11. Charles Motel & Bathhouse Pool & Spa Low Temperature Geothermal...

    Open Energy Info (EERE)

    Motel & Bathhouse Pool & Spa Low Temperature Geothermal Facility Jump to: navigation, search Name Charles Motel & Bathhouse Pool & Spa Low Temperature Geothermal Facility Facility...

  12. Camp Preventorium Hot Springs Pool & Spa Low Temperature Geothermal...

    Open Energy Info (EERE)

    Preventorium Hot Springs Pool & Spa Low Temperature Geothermal Facility Jump to: navigation, search Name Camp Preventorium Hot Springs Pool & Spa Low Temperature Geothermal...

  13. Ringboldt Rapids Hot Springs Pool & Spa Low Temperature Geothermal...

    Open Energy Info (EERE)

    Ringboldt Rapids Hot Springs Pool & Spa Low Temperature Geothermal Facility Jump to: navigation, search Name Ringboldt Rapids Hot Springs Pool & Spa Low Temperature Geothermal...

  14. Sycamore Hot Spring Resort Pool & Spa Low Temperature Geothermal...

    Open Energy Info (EERE)

    Sycamore Hot Spring Resort Pool & Spa Low Temperature Geothermal Facility Jump to: navigation, search Name Sycamore Hot Spring Resort Pool & Spa Low Temperature Geothermal Facility...

  15. Calvary Chapel Conference Center Pool & Spa Low Temperature Geothermal...

    Open Energy Info (EERE)

    Calvary Chapel Conference Center Pool & Spa Low Temperature Geothermal Facility Jump to: navigation, search Name Calvary Chapel Conference Center Pool & Spa Low Temperature...

  16. Klamath Swimming Pools (5) Pool & Spa Low Temperature Geothermal...

    Open Energy Info (EERE)

    Swimming Pools (5) Pool & Spa Low Temperature Geothermal Facility Jump to: navigation, search Name Klamath Swimming Pools (5) Pool & Spa Low Temperature Geothermal Facility...

  17. Bonneville Seabase Scuba Dive Pool Pool & Spa Low Temperature...

    Open Energy Info (EERE)

    Seabase Scuba Dive Pool Pool & Spa Low Temperature Geothermal Facility Jump to: navigation, search Name Bonneville Seabase Scuba Dive Pool Pool & Spa Low Temperature Geothermal...

  18. Glenwood Springs Vapor Caves Pool & Spa Low Temperature Geothermal...

    Open Energy Info (EERE)

    Vapor Caves Pool & Spa Low Temperature Geothermal Facility Jump to: navigation, search Name Glenwood Springs Vapor Caves Pool & Spa Low Temperature Geothermal Facility Facility...

  19. Agua Calientes Trailer Park Space Heating Low Temperature Geothermal...

    Open Energy Info (EERE)

    Agua Calientes Trailer Park Space Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Agua Calientes Trailer Park Space Heating Low Temperature Geothermal...

  20. New Mexico State University District Heating Low Temperature...

    Open Energy Info (EERE)

    New Mexico State University District Heating Low Temperature Geothermal Facility Jump to: navigation, search Name New Mexico State University District Heating Low Temperature...

  1. Idling Emissions Reduction Technology with Low Temperature Combustion...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Idling Emissions Reduction Technology with Low Temperature Combustion of DI Biodiesel and PFI n-Butanol Idling Emissions Reduction Technology with Low Temperature Combustion of DI...

  2. Jackson National Fish Hatchery Aquaculture Low Temperature Geothermal...

    Open Energy Info (EERE)

    Jackson National Fish Hatchery Aquaculture Low Temperature Geothermal Facility Jump to: navigation, search Name Jackson National Fish Hatchery Aquaculture Low Temperature...

  3. California Desert Fish Farm Aquaculture Low Temperature Geothermal...

    Open Energy Info (EERE)

    California Desert Fish Farm Aquaculture Low Temperature Geothermal Facility Jump to: navigation, search Name California Desert Fish Farm Aquaculture Low Temperature Geothermal...

  4. Passive Catalytic Approach to Low Temperature NOx Emission Abatement...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Catalytic Approach to Low Temperature NOx Emission Abatement Passive Catalytic Approach to Low Temperature NOx Emission Abatement Numerically evaluated and optimized proposed...

  5. Rocky Mountain White Tilapia Aquaculture Low Temperature Geothermal...

    Open Energy Info (EERE)

    Rocky Mountain White Tilapia Aquaculture Low Temperature Geothermal Facility Jump to: navigation, search Name Rocky Mountain White Tilapia Aquaculture Low Temperature Geothermal...

  6. A University Consortium on Low Temperature Combustion (LTC) for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Low Temperature Combustion (LTC) for High Efficiency, Ultra-Low Emission Engines A University Consortium on Low Temperature Combustion (LTC) for High Efficiency, Ultra-Low Emission...

  7. Spectroscopic study of low-temperature hydrogen absorption in...

    Office of Scientific and Technical Information (OSTI)

    Spectroscopic study of low-temperature hydrogen absorption in palladium Citation Details In-Document Search Title: Spectroscopic study of low-temperature hydrogen absorption in...

  8. Warm Springs Water District District Heating Low Temperature...

    Open Energy Info (EERE)

    Warm Springs Water District District Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Warm Springs Water District District Heating Low Temperature...

  9. Elko County School District District Heating Low Temperature...

    Open Energy Info (EERE)

    Elko County School District District Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Elko County School District District Heating Low Temperature...

  10. Philip District Heating District Heating Low Temperature Geothermal...

    Open Energy Info (EERE)

    Philip District Heating District Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Philip District Heating District Heating Low Temperature Geothermal...

  11. Kethcum District Heating District Heating Low Temperature Geothermal...

    Open Energy Info (EERE)

    Kethcum District Heating District Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Kethcum District Heating District Heating Low Temperature Geothermal...

  12. Oregon Institute of Technology District Heating Low Temperature...

    Open Energy Info (EERE)

    Oregon Institute of Technology District Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Oregon Institute of Technology District Heating Low Temperature...

  13. Fort Boise Veteran's Hospital District Heating Low Temperature...

    Open Energy Info (EERE)

    Fort Boise Veteran's Hospital District Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Fort Boise Veteran's Hospital District Heating Low Temperature...

  14. Midland District Heating District Heating Low Temperature Geothermal...

    Open Energy Info (EERE)

    Midland District Heating District Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Midland District Heating District Heating Low Temperature Geothermal...

  15. A Reduced Mechanism for Biodiesel Surrogates with Low Temperature...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Reduced Mechanism for Biodiesel Surrogates with Low Temperature Chemistry Title A Reduced Mechanism for Biodiesel Surrogates with Low Temperature Chemistry Publication Type...

  16. Heavy-Duty Low Temperature Combustion Development Activities...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Low Temperature Combustion Development Activities at Caterpillar Heavy-Duty Low Temperature Combustion Development Activities at Caterpillar Presentation given at the 2007 Diesel...

  17. Syngas Enhanced High Efficiency Low Temperature Combustion for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Enhanced High Efficiency Low Temperature Combustion for Clean Diesel Engines Syngas Enhanced High Efficiency Low Temperature Combustion for Clean Diesel Engines A significant...

  18. Low Temperature Combustion Demonstrator for High Efficiency Clean...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Demonstrator for High Efficiency Clean Combustion Low Temperature Combustion Demonstrator for High Efficiency Clean Combustion Applied low temperature combustion to the Navistar...

  19. Low-Temperature Combustion Demonstrator for High-Efficiency Clean...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Low-Temperature Combustion Demonstrator for High-Efficiency Clean Combustion Low-Temperature Combustion Demonstrator for High-Efficiency Clean Combustion 2010 DOE Vehicle...

  20. Enabling High Efficiency Low Temperature Combustion by Adaptive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Low Temperature Combustion by Adaptive In-Situ Jet Cooling Enabling High Efficiency Low Temperature Combustion by Adaptive In-Situ Jet Cooling A new approach, called...

  1. Low Temperature Combustion Demonstrator for High Efficiency Clean...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Low Temperature Combustion Demonstrator for High Efficiency Clean Combustion Low Temperature Combustion Demonstrator for High Efficiency Clean Combustion 2009 DOE Hydrogen Program...

  2. Blue Mountain Hot Spring Guest Ranch Pool & Spa Low Temperature...

    Open Energy Info (EERE)

    Blue Mountain Hot Spring Guest Ranch Pool & Spa Low Temperature Geothermal Facility Jump to: navigation, search Name Blue Mountain Hot Spring Guest Ranch Pool & Spa Low Temperature...

  3. Biological and Biomimetic Low-Temperature Routes to Materials...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Biological and Biomimetic Low-Temperature Routes to Materials for Energy Applications Biological and Biomimetic Low-Temperature Routes to Materials for Energy Applications 2012 DOE...

  4. Jacumba Hot Springs Health Spa Pool & Spa Low Temperature Geothermal...

    Open Energy Info (EERE)

    Jacumba Hot Springs Health Spa Pool & Spa Low Temperature Geothermal Facility Jump to: navigation, search Name Jacumba Hot Springs Health Spa Pool & Spa Low Temperature Geothermal...

  5. Wiesbaden Motel & Health Resort Space Heating Low Temperature...

    Open Energy Info (EERE)

    Wiesbaden Motel & Health Resort Space Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Wiesbaden Motel & Health Resort Space Heating Low Temperature...

  6. Steamboat Springs Health and Rec. Pool & Spa Low Temperature...

    Open Energy Info (EERE)

    Steamboat Springs Health and Rec. Pool & Spa Low Temperature Geothermal Facility Jump to: navigation, search Name Steamboat Springs Health and Rec. Pool & Spa Low Temperature...

  7. Enabling Low Temperature Combustion Through Thermo-Chemical Recuperati...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Low Temperature Combustion Through Thermo-Chemical Recuperation Enabling Low Temperature Combustion Through Thermo-Chemical Recuperation Poster presentation from the 2007 Diesel...

  8. A Conceptual Model for Partially PremixedLow-Temperature Diesel...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PremixedLow-Temperature Diesel Combustion Based onIn-Cylinder Laser Diagnostics and Chemical Kinetics Modeling A Conceptual Model for Partially PremixedLow-Temperature Diesel...

  9. Low Temperature Combustion with Thermo-chemical Recuperation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Low Temperature Combustion with Thermo-chemical Recuperation to Maximize In-use Engine Efficiency Low Temperature Combustion with Thermo-chemical Recuperation to Maximize In-use...

  10. Pulsed depressed collector

    DOE Patents [OSTI]

    Kemp, Mark A

    2015-11-03

    A high power RF device has an electron beam cavity, a modulator, and a circuit for feed-forward energy recovery from a multi-stage depressed collector to the modulator. The electron beam cavity include a cathode, an anode, and the multi-stage depressed collector, and the modulator is configured to provide pulses to the cathode. Voltages of the electrode stages of the multi-stage depressed collector are allowed to float as determined by fixed impedances seen by the electrode stages. The energy recovery circuit includes a storage capacitor that dynamically biases potentials of the electrode stages of the multi-stage depressed collector and provides recovered energy from the electrode stages of the multi-stage depressed collector to the modulator. The circuit may also include a step-down transformer, where the electrode stages of the multi-stage depressed collector are electrically connected to separate taps on the step-down transformer.

  11. Low-temperature geothermal database for Oregon

    SciTech Connect (OSTI)

    Black, G.

    1994-11-01

    The goals of the low-temperature assessment project, performed by the Oregon Department of Geology and Mineral Industries (DOGAMI) is aimed primarily at updating the inventory of the nation's low and moderate temperature geothermal resources. The study has begun in Oregon, where the areas of Paisley, Lakeview, Burns/Hines, Lagrande, and Vale were identified over 40 sites as having potential for direct heat utilization. Specifics sites are outlined, detailing water temperature, flow, and current uses of the sites.

  12. Rotating sample holder at low temperature

    SciTech Connect (OSTI)

    Pasternak, Sebastien; Perrin, Florian; Ciatto, Gianluca; Palancher, Herve; Steinmann, Ricardo [European Synchrotron Radiation Facility, 38043 Grenoble (France)

    2007-07-15

    A low temperature rotary device (cryoturbine) for use in extended x-ray-absorption fine structure measurements in fluorescence mode has been designed and manufactured. The instrument works at a temperature close to liquid Nitrogen and can reach frequencies up to 100 Hz with good stability. The rotation speed is measured with a light-emitting diode driven in stroboscopic mode by a simple electronic circuit.

  13. Low Temperature Proton Conductivity | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURING OFFICE INDUSTRIALU.S.Leadership onProton Conductivity Low Temperature Proton

  14. Low Temperature/Coproduced/Geopressured Subprogram Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankADVANCED MANUFACTURING OFFICE INDUSTRIALU.S.Leadership onProton Conductivity Low Temperature ProtonTim

  15. Impact of Variable Valve Timing on Low Temperature Combustion

    Broader source: Energy.gov [DOE]

    Documents effects of variable valve actuation in implementing low temperature combustion in production engine platform.

  16. Sandia Energy - Low-Temperature Diesel Combustion

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservation of Fe(II)Geothermal Energy &Water Power ProgramLargeLow-Temperature Diesel

  17. Internal absorber solar collector

    DOE Patents [OSTI]

    Sletten, Carlyle J. (106 Nagog Hill Rd., Acton, MA 01720); Herskovitz, Sheldon B. (88 Hammond St., Acton, MA 01720); Holt, F. S. (46 Emerson Rd., Winchester, MA 01890); Sletten, E. J. (Chestnut Hill Rd. R.F.D. Rte. #4, Amherst, NH 03031)

    1981-01-01

    Thin solar collecting panels are described made from arrays of small rod collectors consisting of a refracting dielectric rod lens with an absorber imbedded within it and a reflecting mirror coated on the back side of the dielectric rod. Non-tracking collector panels on vertical walls or roof tops receive approximately 90% of solar radiation within an acceptance zone 60.degree. in elevation angle by 120.degree. or more in the azimuth sectors with a collector concentration ratio of approximately 3.0. Miniaturized construction of the circular dielectric rods with internal absorbers reduces the weight per area of glass, plastic and metal used in the collector panels. No external parts or insulation are needed as heat losses are low due to partial vacuum or low conductivity gas surrounding heated portions of the collector. The miniature internal absorbers are generally made of solid copper with black selective surface and the collected solar heat is extracted at the collector ends by thermal conductivity along the absorber rods. Heat is removed from end fittings by use of liquid circulants. Several alternate constructions are provided for simplifying collector panel fabrication and for preventing the thermal expansion and contraction of the heated absorber or circulant tubes from damaging vacuum seals. In a modified version of the internal absorber collector, oil with temperature dependent viscosity is pumped through a segmented absorber which is now composed of closely spaced insulated metal tubes. In this way the circulant is automatically diverted through heated portions of the absorber giving higher collector concentration ratios than theoretically possible for an unsegmented absorber.

  18. Low temperature sodium-beta battery

    DOE Patents [OSTI]

    Farmer, Joseph C

    2013-11-19

    A battery that will operate at ambient temperature or lower includes an enclosure, a current collector within the enclosure, an anode that will operate at ambient temperature or lower within the enclosure, a cathode that will operate at ambient temperature or lower within the enclosure, and a separator and electrolyte within the enclosure between the anode and the cathode. The anode is a sodium eutectic anode that will operate at ambient temperature or lower and is made of a material that is in a liquid state at ambient temperature or lower. The cathode is a low melting ion liquid cathode that will operate at ambient temperature or lower and is made of a material that is in a liquid state at ambient temperature or lower.

  19. Low Temperature Waste Immobilization Testing Vol. I

    SciTech Connect (OSTI)

    Russell, Renee L.; Schweiger, Michael J.; Westsik, Joseph H.; Hrma, Pavel R.; Smith, D. E.; Gallegos, Autumn B.; Telander, Monty R.; Pitman, Stan G.

    2006-09-14

    The Pacific Northwest National Laboratory (PNNL) is evaluating low-temperature technologies to immobilize mixed radioactive and hazardous waste. Three waste forms—alkali-aluminosilicate hydroceramic cement, “Ceramicrete” phosphate-bonded ceramic, and “DuraLith” alkali-aluminosilicate geopolymer—were selected through a competitive solicitation for fabrication and characterization of waste-form properties. The three contractors prepared their respective waste forms using simulants of a Hanford secondary waste and Idaho sodium bearing waste provided by PNNL and characterized their waste forms with respect to the Toxicity Characteristic Leaching Procedure (TCLP) and compressive strength. The contractors sent specimens to PNNL, and PNNL then conducted durability (American National Standards Institute/American Nuclear Society [ANSI/ANS] 16.1 Leachability Index [LI] and modified Product Consistency Test [PCT]) and compressive strength testing (both irradiated and as-received samples). This report presents the results of these characterization tests.

  20. Low temperature catalyst system for methanol production

    DOE Patents [OSTI]

    Sapienza, R.S.; Slegeir, W.A.; O'Hare, T.E.

    1984-04-20

    This patent discloses a catalyst and process useful at low temperatures (150/sup 0/C) and preferably in the range 80 to 120/sup 0/C used in the production of methanol from carbon monoxide and hydrogen. The catalyst components are used in slurry form and comprise (1) a complex reducing agent derived from the component structure NaH-ROH-M(OAc)/sub 2/ where M is selected from the group consisting of Ni, Pd, and Co and R is a lower alkyl group containing 1 to 6 carbon atoms and (2) a metal carbonyl of a group VI (Mo, Cr, W) metal. For the first component, Nic is preferred (where M = Ni and R = tertiary amyl). For the second component, Mo(CO)/sub 6/ is preferred. The mixture is subjected to a conditioning or activating step under temperature and pressure, similar to the parameters given above, to afford the active catalyst.

  1. Low-temperature geothermal resources of Washington

    SciTech Connect (OSTI)

    Schuster, J.E. [Washington State Dept. of Natural Resources, Olympia, WA (United States). Div. of Geology and Earth Resources] [Washington State Dept. of Natural Resources, Olympia, WA (United States). Div. of Geology and Earth Resources; Bloomquist, R.G. [Washington State Energy Office, Olympia, WA (United States)] [Washington State Energy Office, Olympia, WA (United States)

    1994-06-01

    This report presents information on the location, physical characteristics, and water chemistry of low-temperature geothermal resources in Washington. The database includes 941 thermal (>20C or 68F) wells, 34 thermal springs, lakes, and fumaroles, and 238 chemical analyses. Most thermal springs occur in the Cascade Range, and many are associated with stratovolcanoes. In contrast, 97 percent of thermal wells are located in the Columbia Basin of southeastern Washington. Some 83.5 percent are located in Adams, Benton, Franklin, Grant, Walla Walla, and Yakima Counties. Yakima County, with 259 thermal wells, has the most. Thermal wells do not seem to owe their origin to local sources of heat, such as cooling magma in the Earth`s upper crust, but to moderate to deep circulation of ground water in extensive aquifers of the Columbia River Basalt Group and interflow sedimentary deposits, under the influence of a moderately elevated (41C/km) average geothermal gradient.

  2. Low temperature catalysts for methanol production

    DOE Patents [OSTI]

    Sapienza, R.S.; Slegeir, W.A.; O'Hare, T.E.; Mahajan, D.

    1986-09-30

    A catalyst and process useful at low temperatures (below about 160 C) and preferably in the range 80--120 C used in the production of methanol from carbon monoxide and hydrogen are disclosed. The catalyst is used in slurry form and comprises a complex reducing agent derived from the component structure NaH--RONa-M(OAc)[sub 2] where M is selected from the group consisting of Ni, Pd, and Co and R is a lower alkyl group containing 1--6 carbon atoms. This catalyst is preferably used alone but is also effective in combination with a metal carbonyl of a group VI (Mo, Cr, W) metal. The preferred catalyst precursor is Nic (where M = Ni and R = tertiary amyl). Mo(CO)[sub 6] is the preferred metal carbonyl if such component is used. The catalyst is subjected to a conditioning or activating step under temperature and pressure, similar to the parameters given above, to afford the active catalyst.

  3. Full vector low-temperature magnetic measurements of geologic materials

    E-Print Network [OSTI]

    Feinberg, Joshua M; Solheid, Peter A; Swanson-Hysell, Nicholas L; Jackson, Mike J; Bowles, Julie A

    2015-01-01

    511. FEINBERG ET AL. : THREE-AXIS LOW-TEMPERATURE REMANENCEof pyrrhotite as determined by low- and high-field experi-10.1029/, Full vector low-temperature magnetic measurements

  4. Low-Temperature and Coproduced Geothermal Projects Poster | Department...

    Office of Environmental Management (EM)

    Geothermal Projects Poster Low-Temperature and Coproduced Geothermal Projects Poster This map poster illustrates low-temperature and co-produced geothermal projects across the U.S....

  5. Low-Temperature Diesel Combustion Cross-Cut Research | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Density and Temperature on Soot Formation under High-EGR Conditions Low-Temperature Diesel Combustion Cross-Cut Research LES Applied to Low-Temperature, Diesel and Hydrogen...

  6. Fuel cell current collector

    DOE Patents [OSTI]

    Katz, Murray (Newington, CT); Bonk, Stanley P. (West Willington, CT); Maricle, Donald L. (Glastonbury, CT); Abrams, Martin (Glastonbury, CT)

    1991-01-01

    A fuel cell has a current collector plate (22) located between an electrode (20) and a separate plate (25). The collector plate has a plurality of arches (26, 28) deformed from a single flat plate in a checkerboard pattern. The arches are of sufficient height (30) to provide sufficient reactant flow area. Each arch is formed with sufficient stiffness to accept compressive load and sufficient resiliently to distribute the load and maintain electrical contact.

  7. Low-Temperature, Coproduced, and Geopressured Geothermal Technologies...

    Office of Environmental Management (EM)

    and Geopressured Geothermal Technologies Strategic Action Plan, September 2010 Low-Temperature, Coproduced, and Geopressured Geothermal Technologies Strategic Action...

  8. Metal-air low temperature ionic liquid cell

    DOE Patents [OSTI]

    Friesen, Cody A; Buttry, Daniel A

    2014-11-25

    The present application relates to an electrochemical metal-air cell in which a low temperature ionic liquid is used.

  9. Update on Electrolyte Modeling with Emphasis on Low Temperature...

    Energy Savers [EERE]

    Regions (subtask low temperature performance) Linking Ion Solvation and Lithium Battery Electrolyte Properties Molecular dynamics simulation studies of electrolytes...

  10. Systems for Electrical Power from Coproduced and Low Temperature...

    Broader source: Energy.gov (indexed) [DOE]

    Systems for Electrical Power from Coproduced and Low Temperature Geothermal Resources includes background, results and discussion, future plans and conclusion....

  11. Biodiesel's Enabling Characteristics in Attaining Low Temperature Diesel Combustion

    Broader source: Energy.gov [DOE]

    Discusses reasons and physical significance of cool-flame behavior of biodiesel on improving low temperature diesel combustion

  12. GTP energy production from low-temperature resources, coproduced...

    Energy Savers [EERE]

    DISCLAIMER: Geothermal Home About the Geothermal Technologies Office Enhanced Geothermal Systems Hydrothermal Resources Low-Temperature & Coproduced Resources Systems...

  13. SOLAR NANTENNA ELECTROMAGNETIC COLLECTORS

    SciTech Connect (OSTI)

    Steven D. Novack; Dale K. Kotter; Dennis Slafer; Patrick Pinhero

    2008-08-01

    This research explores a new efficient approach for producing electricity from the abundant energy of the sun. A nanoantenna electromagnetic collector (NEC) has been designed, prototyped, and tested. Proof of concept has been validated. The device targets mid-infrared wavelengths where conventional photovoltaic (PV) solar cells do not respond but is abundant in solar energy. The initial concept of designing NEC antennas was based on scaling of radio frequency antenna theory. This approach has proven unsuccessful by many due to not fully understanding and accounting for the optical behavior of materials in the THz region. Also until recent years the nanofabrication methods were not available to fabricate the optical antenna elements. We have addressed and overcome both technology barriers. Several factors were critical in successful implementation of NEC including: 1) frequency-dependent modeling of antenna elements, 2) selection of materials with proper THz properties and 3) novel manufacturing methods that enable economical large-scale manufacturing. The work represents an important step toward the ultimate realization of a low-cost device that will collect as well as convert this radiation into electricity, which will lead to a wide spectrum, high conversion efficiency, and low cost solution to complement conventional PVs.

  14. Low Temperature Aluminum Dissolution Of Sludge Waste

    SciTech Connect (OSTI)

    Keefer, M.T.; Hamm, B.A.; Pike, J.A. [Washington Savannah River Company, Aiken, SC (United States)

    2008-07-01

    High Level Waste (HLW) at the Savannah River Site (SRS) is currently stored in aging underground storage tanks. This waste is a complex mixture of insoluble solids, referred to as sludge, and soluble salts. Continued long-term storage of these radioactive wastes poses an environmental risk. The sludge is currently being stabilized in the Defense Waste Processing Facility (DWPF) through a vitrification process immobilizing the waste in a borosilicate glass matrix for long-term storage in a federal repository. Without additional treatment, the existing volume of sludge would produce nearly 8000 canisters of vitrified waste. Aluminum compounds, along with other non-radioactive components, represent a significant portion of the sludge mass currently planned for vitrification processing in DWPF. Removing the aluminum from the waste stream reduces the volume of sludge requiring vitrification and improves production rates. Treating the sludge with a concentrated sodium hydroxide (caustic) solution at elevated temperatures (>90 deg. C) to remove aluminum is part of an overall sludge mass reduction effort to reduce the number of vitrified canisters, shorten the life cycle for the HLW system, and reduce the risk associated with the long term storage of radioactive wastes at SRS. A projected reduction of nearly 900 canisters will be achieved by performing aluminum dissolution on six targeted sludge batches; however, a project to develop and install equipment will not be ready for operation until 2013. The associated upgrades necessary to implement a high temperature process in existing facilities are costly and present many technical challenges. Efforts to better understand the characteristics of the sludge mass and dissolution kinetics are warranted to overcome these challenges. Opportunities to further reduce the amount of vitrified waste and increase production rates should also be pursued. Sludge staged in Tank 51 as the next sludge batch for feed to DWPF consisted primarily of radioactive wastes containing a very high aluminum concentration. Based on initial laboratory testing and previous sludge characterization, aluminum in this sludge could be dissolved at low temperature (no more than 65 deg. C) in a concentrated caustic solution. The amount of aluminum predicted to dissolve under these conditions ranged from 25% to 80%. An opportunity existed to remove a significant amount of aluminum prior to vitrification in DWPF and increase the level of understanding of the effects of caustic dissolution of aluminum at lower temperatures. This paper presents the results of a real waste laboratory demonstration and full-scale implementation of a low temperature aluminum dissolution process which should be considered as a viable means to reduce radioactive sludge mass and reduce the amount of waste to be vitrified. (authors)

  15. SELECTIVE ABSORBER COATED FOILS FOR SOLAR COLLECTORS

    E-Print Network [OSTI]

    Lampert, Carl M.

    2013-01-01

    fabrication of solar collector panels. adhesives and bondingdirectly to solar collector panels. the solar selectivefabrication of solar collector panels. However, the finish

  16. Low temperature catalysts for methanol production

    DOE Patents [OSTI]

    Sapienza, Richard S. (1 Miller Ave., Shoreham, NY 11786); Slegeir, William A. (7 Florence Rd., Hampton Bays, NY 11946); O'Hare, Thomas E. (11 Geiger Pl., Huntington Station, NY 11746); Mahajan, Devinder (14 Locust Ct., Selden, NY 11784)

    1986-01-01

    A catalyst and process useful at low temperatures (below about 160.degree. C.) and preferably in the range 80.degree.-120.degree. C. used in the production of methanol from carbon monoxide and hydrogen is disclosed. The catalyst is used in slurry form and comprises a complex reducing agent derived from the component structure NaH--RONa--M(OAc).sub.2 where M is selected from the group consisting of Ni, Pd, and Co and R is a lower alkyl group containing 1-6 carbon atoms. This catalyst is preferably used alone but is also effective in combination with a metal carbonyl of a group VI (Mo, Cr, W) metal. The preferred catalyst precursor is Nic (where M=Ni and R=tertiary amyl). Mo(CO).sub.6 is the preferred metal carbonyl if such component is used. The catalyst is subjected to a conditioning or activating step under temperature and pressure, similar to the parameters given above, to afford the active catalyst.

  17. Low temperature catalysts for methanol production

    DOE Patents [OSTI]

    Sapienza, R.S.; Slegeir, W.A.; O'Hare, T.E.; Mahajan, D.

    1985-03-12

    A catalyst and process useful at low temperatures (below about 160/sup 0/C) and preferably in the range 80 to 120/sup 0/C used in the production of methanol from carbon monoxide and hydrogen is disclosed. The catalyst is used in slurry form and comprises a complex reducing agent derived from the component structure NaH-RONa-M(OAc)/sub 2/ where M is selected from the group consisting of Ni, Pd, and Co and R is a lower alkyl group containing 1 to 6 carbon atoms. This catalyst is preferably used alone but is also effective in combination with a metal carbonyl of a group VI (Mo, Cr, W) metal. The preferred catalyst precursor is Nic (where M = Ni and R = tertiary amyl). Mo(CO)/sub 6/ is the preferred metal carbonyl if such component is used. The catalyst is subjected to a conditioning or activating step under temperature and pressure, similar to the parameters given above, to afford the active catalyst.

  18. Low temperature catalysts for methanol production

    DOE Patents [OSTI]

    Sapienza, R.S.; Slegeir, W.A.; O'Hare, T.E.; Mahajan, D.

    1986-10-28

    A catalyst and process useful at low temperatures (below about 160 C) and preferably in the range 80--120 C used in the production of methanol from carbon monoxide and hydrogen are disclosed. The catalyst is used in slurry form and comprises a complex reducing agent derived from the component structure NaH--RONa-M(OAc)[sub 2] where M is selected from the group consisting of Ni, Pd, and Co and R is a lower alkyl group containing 1-6 carbon atoms. This catalyst is preferably used alone but is also effective in combination with a metal carbonyl of a group VI (Mo, Cr, W) metal. The preferred catalyst precursor is NiC (where M = Ni and R = tertiary amyl). Mo(CO)[sub 6] is the preferred metal carbonyl if such component is used. The catalyst is subjected to a conditioning or activating step under temperature and pressure, similar to the parameters given above, to afford the active catalyst.

  19. Gasoline Ultra Efficient Fuel Vehicle with Advanced Low Temperature Combustion

    SciTech Connect (OSTI)

    Confer, Keith

    2014-09-30

    The objective of this program was to develop, implement and demonstrate fuel consumption reduction technologies which are focused on reduction of friction and parasitic losses and on the improvement of thermal efficiency from in-cylinder combustion. The program was executed in two phases. The conclusion of each phase was marked by an on-vehicle technology demonstration. Phase I concentrated on short term goals to achieve technologies to reduce friction and parasitic losses. The duration of Phase I was approximately two years and the target fuel economy improvement over the baseline was 20% for the Phase I demonstration. Phase II was focused on the development and demonstration of a breakthrough low temperature combustion process called Gasoline Direct- Injection Compression Ignition (GDCI). The duration of Phase II was approximately four years and the targeted fuel economy improvement was 35% over the baseline for the Phase II demonstration vehicle. The targeted tailpipe emissions for this demonstration were Tier 2 Bin 2 emissions standards.

  20. Tracking system for solar collectors

    DOE Patents [OSTI]

    Butler, B.

    1980-10-01

    A tracking system is provided for pivotally mounted spaced-apart solar collectors. A pair of cables is connected to spaced-apart portions of each collector, and a driver displaces the cables, thereby causing the collectors to pivot about their mounting, so as to assume the desired orientation. The collectors may be of the cylindrical type as well as the flat-plate type. Rigid spar-like linkages may be substituted for the cables. Releasable attachments of the cables to the collectors is also described, as is a fine tuning mechanism for precisely aligning each individual collector.

  1. Tracking system for solar collectors

    DOE Patents [OSTI]

    Butler, Barry L. (Golden, CO)

    1984-01-01

    A tracking system is provided for pivotally mounted spaced-apart solar collectors. A pair of cables is connected to spaced-apart portions of each collector, and a driver displaces the cables, thereby causing the collectors to pivot about their mounting, so as to assume the desired orientation. The collectors may be of the cylindrical type as well as the flat-plate type. Rigid spar-like linkages may be substituted for the cables. Releasable attachments of the cables to the collectors is also described, as is a fine tuning mechanism for precisely aligning each individual collector.

  2. Understanding diesel engine lubrication at low temperature

    SciTech Connect (OSTI)

    Smith, M.F. Jr.

    1990-01-01

    This paper reports on oil pumpability in passenger car gasoline engines that was well-characterized by an ASTM program and by individual researchers in the 1970's and early 1980's. oil pumpability in diesel engines however, was not investigated to any significant extent until the mid-1980's. This study was initiated to define the performance of several commercial viscosity modifiers in different formulations containing 3 detergent-inhibitor (DI) additive packages and 4 basestock types. The test oils were run at {minus}18{degrees} C (0{degrees} F) in a Cummins NTC-400 diesel engine. The results, when statistically analyzed, indicated that a new, second generation olefin copolymer (OCP) viscosity modifier has better performance that a first generation OCP and, furthermore, had performance equal to a polymethacrylate (PMA) viscosity modifier. The analysis also showed that one DI/base stock combination had a significant effect on performance. The apparent shear rate of the oil in the pump inlet tube was calculated from the oil pump flow rate measured at idle speed at low temperature and the pump inlet tube diameter. The shear rate and oil viscosity were used to estimate the shear stress in the pump inlet tube. The shear stress level of the engine is 56% higher than the Mini-Rotary Viscometer (MRV). Hence, the current MRV procedure is rheologically unsuitable to predict pumpability in a large diesel engine. A new device was developed for measuring the oil film thickness in the turbocharge bearing and noting the time when a full oil film is formed. Results indicate that a full oil film occurs almost immediately, well before any oil pressure is observed at the turbocharge inlet. Residual oil remaining in the bearing after shutdown may account of this observation. The oil film maintained its thickness both before, and after the first indication of oil pressure. More work is needed to study this effect.

  3. Solar energy collector

    DOE Patents [OSTI]

    Brin, Raymond L. (Cedar Crest, NM); Pace, Thomas L. (Albuquerque, NM)

    1978-01-01

    The invention relates to a solar energy collector comprising solar energy absorbing material within chamber having a transparent wall, solar energy being transmitted through the transparent wall, and efficiently absorbed by the absorbing material, for transfer to a heat transfer fluid. The solar energy absorbing material, of generally foraminous nature, absorbs and transmits the solar energy with improved efficiency.

  4. Novel Energy Conversion Equipment for Low Temperature Geothermal...

    Open Energy Info (EERE)

    1 Recovery Act: Geothermal Technologies Program Project Type Topic 2 Geothermal Energy Production from Low Temperature Resources, Coproduced Fluids from Oil and Gas Wells, and...

  5. Low-Temperature and Co-Produced Resources Fact Sheet

    SciTech Connect (OSTI)

    Geothermal Technologies Office, U.S. Department of Energy

    2013-02-01

    This two-page Geothermal Technologies Office fact sheet provides an overview of low-temperature and co-produced resources. It includes technology benefits and project highlights.

  6. Electric Power Generation from Low-Temperature Geothermal Resources...

    Open Energy Info (EERE)

    1 Recovery Act: Geothermal Technologies Program Project Type Topic 2 Geothermal Energy Production from Low Temperature Resources, Coproduced Fluids from Oil and Gas Wells, and...

  7. Sandia Energy - Heavy Duty Low-Temperature & Diesel Combustion

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    reduce engine-out emissions. These approaches could allow advanced diesel combustion or low-temperature combustion strategies with potential for enabling both increased fuel...

  8. Cedarville Elementary & High School Space Heating Low Temperature...

    Open Energy Info (EERE)

    Cedarville Elementary & High School Space Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Cedarville Elementary & High School Space Heating Low...

  9. Weight Loss Regime for Massive Low Temperature Electrons | The...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Weight Loss Regime for Massive Low Temperature Electrons A compound made out of ytterbium (Yb), platinum (Pt), and bismuth (Bi) offers researchers the opportunity to watch the...

  10. Low-Temperature Hydrocarbon/CO Oxidation Catalysis in Support...

    Energy Savers [EERE]

    HydrocarbonCO Oxidation Catalysis in Support of HCCI Emission Control Low-Temperature HydrocarbonCO Oxidation Catalysis in Support of HCCI Emission Control Presentation from the...

  11. Low-Temperature Hydrocarbon/CO Oxidation Catalysis in Support...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Low-Temperature HydrocarbonCO Oxidation Catalysis in Support of HCCI Emission Control Ken Rapp, Liyu Li, Jonathan Male, Dave King Pacific Northwest National...

  12. LOW TEMPERATURE GEOTHERMAL MINERAL RECOVERY PROGRAM 02/11/2014...

    Broader source: Energy.gov (indexed) [DOE]

    mineral-webinar.pdf More Documents & Publications LOW TEMPERATURE GEOTHERMAL MINERAL RECOVERY PROGRAM Geothermal Play Fairway Analysis Geothermal Play Fairway Analysis...

  13. Novel Energy Conversion Equipment for Low Temperature Geothermal...

    Broader source: Energy.gov (indexed) [DOE]

    Develop equipment that generates electricity from low temperature geothermal resources at a cost at least 20% below that of the currently available technology....

  14. Occurrence of Low-Temperature Geothermal Waters in the United...

    Open Energy Info (EERE)

    Occurrence of Low-Temperature Geothermal Waters in the United States, in Assessment of Geothermal Resources of the United States -- 1978 Jump to: navigation, search OpenEI...

  15. Low-Temperature Hydrocarbon/CO Oxidation Catalysis in Support...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (OFCVT). deer07rappe.pdf More Documents & Publications Low-Temperature HydrocarbonCO Oxidation Catalysis in Support of HCCI Emission Control Selectlive Catalytic Reducution of...

  16. A University Consortium on Low Temperature Combustion (LTC) for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Low-Temperature Combustion for High-Efficiency, Ultra-Low Emission Engines A University Consortium on Efficient and Clean High-Pressure,...

  17. Pagosa Springs District Heating District Heating Low Temperature...

    Open Energy Info (EERE)

    Pagosa Springs District Heating District Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Pagosa Springs District Heating District Heating Low...

  18. City of Klamath Falls District Heating District Heating Low Temperatur...

    Open Energy Info (EERE)

    City of Klamath Falls District Heating District Heating Low Temperature Geothermal Facility Jump to: navigation, search Name City of Klamath Falls District Heating District Heating...

  19. San Bernardino District Heating District Heating Low Temperature...

    Open Energy Info (EERE)

    San Bernardino District Heating District Heating Low Temperature Geothermal Facility Jump to: navigation, search Name San Bernardino District Heating District Heating Low...

  20. Boise City Geothermal District Heating District Heating Low Temperatur...

    Open Energy Info (EERE)

    Boise City Geothermal District Heating District Heating Low Temperature Geothermal Facility Jump to: navigation, search Name Boise City Geothermal District Heating District Heating...

  1. Low-Temperature Hydrocarbon/CO Oxidation Catalysis in Support...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Catalysis in Support of HCCI Emission Control Low-Temperature HydrocarbonCO Oxidation Catalysis in Support of HCCI Emission Control Lean NOx Catalysis Research and Development...

  2. Multicylinder Diesel Engine for Low Temperature Combustion Operation

    Broader source: Energy.gov [DOE]

    Fuel injection strategies to extend low temperature combustion temperatures to yield low NOx at higher loads and better efficiency over the speed-load range

  3. Low temperature catalysts and process for methanol production

    DOE Patents [OSTI]

    Sapienza, R.S.

    1984-02-21

    This patent discloses a catalyst and process useful in low temperatures (=1500/sup 0/C) and preferably in the range 80 to 120/sup 0/C us

  4. Vehicle Technologies Office Merit Review 2015: Low-Temperature...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Merit Review 2014: Low-Temperature Gasoline Combustion (LTGC) Engine Research HCCI and Stratified-Charge CI Engine Combustion Research HCCI and Stratified-Charge CI Engine...

  5. Klamath Apartment Buildings (13) Space Heating Low Temperature...

    Open Energy Info (EERE)

    (13) Space Heating Low Temperature Geothermal Facility Facility Klamath Apartment Buildings (13) Sector Geothermal energy Type Space Heating Location Klamath Falls, Oregon...

  6. Low-temperature charge transport in Ga-acceptor nanowires implanted by focused-ion beams

    E-Print Network [OSTI]

    Robinson, SJ

    2008-01-01

    Low-Temperature Charge Transport in Ga-Acceptor Nanowiresare highly nonlinear at low temperatures, and a thresholdmetallic conductance at low temperatures could be achieved

  7. Multiple discharge cylindrical pump collector

    DOE Patents [OSTI]

    Dunn, Charlton (Calabasas, CA); Bremner, Robert J. (Woodland Hills, CA); Meng, Sen Y. (Reseda, CA)

    1989-01-01

    A space-saving discharge collector 40 for the rotary pump 28 of a pool-type nuclear reactor 10. An annular collector 50 is located radially outboard for an impeller 44. The annular collector 50 as a closed outer periphery 52 for collecting the fluid from the impeller 44 and producing a uniform circumferential flow of the fluid. Turning means comprising a plurality of individual passageways 54 are located in an axial position relative to the annular collector 50 for receiving the fluid from the annular collector 50 and turning it into a substantially axial direction.

  8. Low temperature barrier wellbores formed using water flushing

    DOE Patents [OSTI]

    McKinzie, II; John, Billy [Houston, TX; Keltner, Thomas Joseph [Spring, TX

    2009-03-10

    A method of forming an opening for a low temperature well is described. The method includes drilling an opening in a formation. Water is introduced into the opening to displace drilling fluid or indigenous gas in the formation adjacent to a portion of the opening. Water is produced from the opening. A low temperature fluid is applied to the opening.

  9. Solar collector array

    DOE Patents [OSTI]

    Hall, John Champlin; Martins, Guy Lawrence

    2015-09-06

    A method and apparatus for efficient manufacture, assembly and production of solar energy. In one aspect, the apparatus may include a number of modular solar receiver assemblies that may be separately manufactured, assembled and individually inserted into a solar collector array housing shaped to receive a plurality of solar receivers. The housing may include optical elements for focusing light onto the individual receivers, and a circuit for electrically connecting the solar receivers.

  10. Low-temperature random matrix theory at the soft edge

    SciTech Connect (OSTI)

    Edelman, Alan; Persson, Per-Olof; Sutton, Brian D.

    2014-06-15

    Low temperature” random matrix theory is the study of random eigenvalues as energy is removed. In standard notation, ? is identified with inverse temperature, and low temperatures are achieved through the limit ? ? ?. In this paper, we derive statistics for low-temperature random matrices at the “soft edge,” which describes the extreme eigenvalues for many random matrix distributions. Specifically, new asymptotics are found for the expected value and standard deviation of the general-? Tracy-Widom distribution. The new techniques utilize beta ensembles, stochastic differential operators, and Riccati diffusions. The asymptotics fit known high-temperature statistics curiously well and contribute to the larger program of general-? random matrix theory.

  11. A University Consortium on Low Temperature Combustion (LTC) for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Consortium on Low Temperature Combustion (LTC) for High Efficiency, Ultra-Low Emission Engines Acknowledgements DOE LTC Consortium project DE-FC26-06NT42629 Sandia National...

  12. Field Demonstration of High Efficiency Ultra-Low-Temperature...

    Broader source: Energy.gov (indexed) [DOE]

    Ultra-low temperature laboratory freezers (ULTs) are some of the most energy-intensive pieces of equipment in a scientific research laboratory, yet there are several barriers to...

  13. Low-Temperature Hydrocarbon/CO Oxidation Catalysis in Support...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Annual Merit Review and Peer Evaluation Meeting, May 18-22, 2009 -- Washington D.C. acep03rappe.pdf More Documents & Publications Low-Temperature HydrocarbonCO Oxidation...

  14. Predictive kinetic modeling of low-temperature hydrocarbon oxidation

    E-Print Network [OSTI]

    Jalan, Amrit

    2014-01-01

    Low temperature oxidation in the gas and condensed phases has been the subject of experimental investigations for many decades owing to applications in many areas of practical significance like thermal stability, combustion, ...

  15. Low Temperature Combustion Demonstrator for High Efficiency Clean Combustion

    Broader source: Energy.gov [DOE]

    Applied low temperature combustion to the Navistar 6.4L V8 engine with 0.2g NOx/bhp-hr operation attained at the rated 16.5 BMEP

  16. On Soot Reduction by Post Injection Under Dilute Low Temperature...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Low Temperature Diesel Combustion Presentation given at DEER 2006, August 20-24, 2006, Detroit, Michigan. Sponsored by the U.S. DOE's EERE FreedomCar and Fuel Partnership and 21st...

  17. 2014 Low-Temperature and Coproduced Geothermal Resources Fact Sheet

    SciTech Connect (OSTI)

    Tim Reinhardt, Program Manager

    2014-09-01

    As a growing sector of geothermal energy development, the Low-Temperature Program supports innovative technologies that enable electricity production and cascaded uses from geothermal resources below 300° Fahrenheit.

  18. Measured Performance of a Low Temperature Air Source Heat Pump

    SciTech Connect (OSTI)

    R.K. Johnson

    2013-09-01

    A 4-ton Low Temperature Heat Pump (LTHP) manufactured by Hallowell International was installed in a residence near New Haven, Connecticut and monitored over two winters of operation. After attending to some significant service issues, the heat pump operated as designed. This report should be considered a review of the dual compressor “boosted heat pump” technology. The Low Temperature Heat Pump system operates with four increasing levels of capacity (heat output) as the outdoor temperature drops.

  19. An Advanced Ultra-Low Temperature Scanning Probe Microscope

    E-Print Network [OSTI]

    An Advanced Ultra-Low Temperature Scanning Probe Microscope P R O J E C T L E A D E R : Joseph); Steven Blankenship, Alan Band (NIST) G O A L To develop an ultra-high vacuum, ultra-low temperature, high of subpicometer stability and can operate in ultra-high vacuum at 10 mK, and in magnetic fields up to 15 T

  20. Plasma heating power dissipation in low temperature hydrogen plasmas

    E-Print Network [OSTI]

    Komppula, J

    2015-01-01

    Theoretical framework for power dissipation in low temperature plasmas in corona equilibrium is developed. The framework is based on fundamental conservation laws and reaction cross sections and is only weakly sensitive to plasma parameters, e.g. electron temperature and density. The theory is applied to low temperature atomic and molecular hydrogen laboratory plasmas for which the plasma heating power dissipation to photon emission, ionization and chemical potential is calculated. The calculated photon emission is compared to recent experimental results.

  1. Low temperature upper critical eld studies in organic superconductor

    E-Print Network [OSTI]

    Zuo, Fulin

    Low temperature upper critical eld studies in organic superconductor 00 -BEDT-TTF2SF5CH2CF2SO3 F 00-BEDT-TTF2SF5CH2CF2SO3: For eld parallel to the superconducting layers, the upper critical eldCH2CF2SO3 at low temperatures and eld up to 18 Tesla. For eld parallel to the planes, the upper

  2. A SOLAR TEST COLLECTOR FOR EVALUATION OF BOTH SELECTIVE AND NON-SELECTIVE ABSORBERS

    E-Print Network [OSTI]

    Lampert, C.M.

    2011-01-01

    the sun, to suit the se~son of the year, The collector pipescollector includes a manual tilting stand for orientation to the sun.

  3. SELECTIVE ABSORBER COATED FOILS FOR SOLAR COLLECTORS

    E-Print Network [OSTI]

    Lampert, Carl M.

    2013-01-01

    p. 1080. AES Second Coatings for Solar Collectors Symp. , 11solar collector panels. Here the major consideration is whether the coatingcoating concept is to use heavy starting stock which might be suitable for direct fabrication of solar collector

  4. SELECTIVE ABSORBER COATED FOILS FOR SOLAR COLLECTORS

    E-Print Network [OSTI]

    Lampert, Carl M.

    2013-01-01

    Proc. of 1977 Flat Plate Solar Collector Conference- USDOE,"Second Coatings for Solar Collectors Symp. , 11 Winter Park,COATED FOILS FOR SOLAR COLLECTORS Carl M. Lampert TWO-WEEK

  5. Integrated solar collector

    DOE Patents [OSTI]

    Tchernev, Dimiter I. (9 Woodman Rd., Chestnut Hill, MA 02167)

    1985-01-01

    A solar collector having a copper panel in a contiguous space relationship with a condenser-evaporator heat exchanger located under the panel, the panel having a honeycomb-like structure on its interior defining individual cells which are filled with zeolite loaded, in its adsorbed condition, with 18 to 20% by weight of water. The interior of the panel and heat exchanger are maintained at subatmospheric pressure of about 0.1 to 1 psia. The panel and heat exchanger are insulated on their lateral sides and bottoms and on the top of the heat exchange. The panel has a black coating on its top which is exposed to and absorbs solar energy. Surrounding the insulation (which supports the panel) is an extruded aluminum framework which supports a pair of spaced-apart glass panels above the solar panel. Water in conduits from a system for heating or cooling or both is connected to flow into an inlet and discharge from outlet of a finned coil received within the heat exchanger. The collector panel provides heat during the day through desorption and condensing of water vapor from the heated solar panel in the heat exchanger and cools at night by the re-adsorption of the water vapor from the heat exchanger which lowers the absolute pressure within the system and cools the heat exchange coils by evaporation.

  6. Biobriefcase aerosol collector

    DOE Patents [OSTI]

    Bell, Perry M. (Tracy, CA); Christian, Allen T. (Madison, WI); Bailey, Christopher G. (Pleasanton, CA); Willis, Ladona (Manteca, CA); Masquelier, Donald A. (Tracy, CA); Nasarabadi, Shanavaz L. (Livermore, CA)

    2009-09-22

    A system for sampling air and collecting particles entrained in the air that potentially include bioagents. The system comprises providing a receiving surface, directing a liquid to the receiving surface and producing a liquid surface. Collecting samples of the air and directing the samples of air so that the samples of air with particles entrained in the air impact the liquid surface. The particles potentially including bioagents become captured in the liquid. The air with particles entrained in the air impacts the liquid surface with sufficient velocity to entrain the particles into the liquid but cause minor turbulence. The liquid surface has a surface tension and the collector samples the air and directs the air to the liquid surface so that the air with particles entrained in the air impacts the liquid surface with sufficient velocity to entrain the particles into the liquid, but cause minor turbulence on the surface resulting in insignificant evaporation of the liquid.

  7. Low-temperature coherence properties of Z_2 quantum memory

    E-Print Network [OSTI]

    Tomoyuki Morimae

    2010-01-08

    We investigate low-temperature coherence properties of the Z_2 quantum memory which is capable of storing the information of a single logical qubit. We show that the memory has superposition of macroscopically distinct states for some values of a control parameter and at sufficiently low temperature, and that the code states of this memory have no instability except for the inevitable one. However, we also see that the coherence power of this memory is limited by space and time. We also briefly discuss the RVB memory, which is an improvement of the Z_2 quantum memory, and the relations of our results to the obscured symmetry breaking in statistical physics.

  8. A Self-Biasing Pulsed Depressed Collector

    SciTech Connect (OSTI)

    Kemp, Mark A.; Jensen, Aaron; Neilson, Jeff; /SLAC

    2014-05-29

    Depressed collectors have been utilized successfully for many years to improve the electrical efficiency of vacuum electron devices. Increasingly, pulsed, high-peak power accelerator applications are placing a premium on electrical efficiency. As RF systems are responsible for a large percentage of the overall energy usage at accelerator laboratories, methods to improve upon the state-of-the-art in pulsed high-power sources are desired. This paper presents a technique for self-biasing the stages in a multistage depressed collector. With this technique, the energy lost during the rise and fall times of the pulse can be recovered, separate power supplies are not needed, and existing modulators can be retrofitted. Calculations show that significant cost savings can be realized with the implementation of this device in high-power systems. In this paper, the technique is described along with experimental demonstration. (auth)

  9. AEROSOL PARTICLE COLLECTOR DESIGN STUDY

    SciTech Connect (OSTI)

    Lee, S; Richard Dimenna, R

    2007-09-27

    A computational evaluation of a particle collector design was performed to evaluate the behavior of aerosol particles in a fast flowing gas stream. The objective of the work was to improve the collection efficiency of the device while maintaining a minimum specified air throughput, nominal collector size, and minimal power requirements. The impact of a range of parameters was considered subject to constraints on gas flow rate, overall collector dimensions, and power limitations. Potential improvements were identified, some of which have already been implemented. Other more complex changes were identified and are described here for further consideration. In addition, fruitful areas for further study are proposed.

  10. Shenandoah parabolic dish solar collector

    SciTech Connect (OSTI)

    Kinoshita, G.S.

    1985-01-01

    The objectives of the Shenandoah, Georgia, Solar Total Energy System are to design, construct, test, and operate a solar energy system to obtain experience with large-scale hardware systems for future applications. This report describes the initial design and testing activities conducted to select and develop a collector that would serve the need of such a solar total energy system. The parabolic dish was selected as the collector most likely to maximize energy collection as required by this specific site. The fabrication, testing, and installation of the parabolic dish collector incorporating improvements identified during the development testing phase are described.

  11. MINICHANNEL-TUBE SOLAR THERMAL COLLECTORS FOR LOW TO MEDIUM TEMPERATURE APPLICATIONS

    E-Print Network [OSTI]

    Duong, Van Thuc

    2015-01-01

    Minichannel Solar Collector Design . . . . . . . . . . . . .Solar Collector Design . . . . . . . . . . . . . . . 192 MINICHANNEL SOLAR COLLECTOR DESIGNS . . . . . . . . .

  12. Single-well Low Temperature CO2- based Engineered Geothemal System...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Single-well Low Temperature CO2- based Engineered Geothemal System Single-well Low Temperature CO2- based Engineered Geothemal System Single-well Low Temperature CO2- based...

  13. Wisconsin collector-efficiency study, phase two

    SciTech Connect (OSTI)

    Abright, B.L.

    1982-01-15

    The collector efficiency study developed a solar collector rating methodology specific to Wisconsin conditions. Existing rating programs were researched and a collector methodology was developed. A computer program was written to calculate the collector ratings and 25 collector models were rated. The accuracy of the proposed rating methodology was evaluated for 16 collectors placed in 11 domestic hot water systems. One liquid space heating analysis with storage and one air space heating analysis without storage were completed. A solar assisted heat pump in which the solar collectors function as evaporators was also analyzed.

  14. The boson peak in structural and orientational glasses of simple alcohols: Specific heat at low temperatures

    E-Print Network [OSTI]

    Miguel A. Ramos; Cesar Talon; Sebastian Vieira

    2002-01-30

    We review in this work specific-heat experiments, that we have conducted on different hydrogen-bonded glasses during last years. Specifically, we have measured the low-temperature specific heat Cp for a set of glassy alcohols: normal and fully-deuterated ethanol, 1- and 2- propanol, and glycerol. Ethanol exhibits a very interesting polymorphism presenting three different solid phases at low temperature: a fully-ordered (monoclinic) crystal, an orientationally-disordered (cubic) crystal or 'orientational glass', and the ordinary structural glass. By measuring and comparing the low-temperature specific heat of the three phases, in the 'boson peak' range 2-10 K as well as in the tunneling-states range below 1K, we are able to provide a quantitative confirmation that ''glassy behavior'' is not an exclusive property of amorphous solids. On the other hand, propanol is the simplest monoalcohol with two different stereoisomers (1- and 2-propanol), what allows us to study directly the influence of the spatial rearrangement of atoms on the universal properties of glasses. We have measured the specific heat of both isomers, finding a noteworthy quantitative difference between them. Finally, low-temperature specific-heat data of glassy glycerol have also been obtained. Here we propose a simple method based upon the soft-potential model to analyze low-temperature specific-heat measurements, and we use this method for a quantitative comparison of all these data of glassy alcohols and as a stringent test of several universal correlations and scaling laws suggested in the literature. In particular, we find that the interstitialcy model for the boson peak [A. V. Granato, Phys. Rev. Lett. 68 (1992) 974] gives a very good account of the temperature at which the maximum in Cp/T^3 occurs.

  15. PROCEEDINGS OF THE SYMPOSIUM ON LOW TEMPERATURE ELECTRONICS

    E-Print Network [OSTI]

    Fossum, Eric R.

    PROCEEDINGS OF THE SYMPOSIUM ON LOW TEMPERATURE ELECTRONICS AND HIGH TEMPERATURE plane cold head to the warmer electronics compartment. These wires carry heat from the electronics compartment to the cold head, increasing the load on the cold head refrigerator or cryogen supply. The wires

  16. Measurements of Low Temperature Dielectronic Recombination in L-Shell

    E-Print Network [OSTI]

    Savin, Daniel Wolf

    , and radiative transfer effects. In CP547, Atomic Processes in Plasmas: Twelfth Topical Conf, edited by R. CMeasurements of Low Temperature Dielectronic Recombination in L-Shell Iron for Modeling X for these ions significantly affect our ability to model and inter- pret the line emission from observations

  17. Localized temperature stability of low temperature cofired ceramics

    SciTech Connect (OSTI)

    Dai, Steven Xunhu

    2013-11-26

    The present invention is directed to low temperature cofired ceramic modules having localized temperature stability by incorporating temperature coefficient of resonant frequency compensating materials locally into a multilayer LTCC module. Chemical interactions can be minimized and physical compatibility between the compensating materials and the host LTCC dielectrics can be achieved. The invention enables embedded resonators with nearly temperature-independent resonance frequency.

  18. Study of the Low Temperature Oxidation of Propane Maximilien Cord

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Study of the Low Temperature Oxidation of Propane Maximilien Cord , Benoit Husson , Juan of China, Hefei, Anhui 230029, P. R. China Abstract The lowtemperature oxidation of propane oxidation of propane in the gas phase has been the subject of very few experimental studies, mainly

  19. Low Temperature Air Bake of Stainless Steel for Very Low

    E-Print Network [OSTI]

    Low Temperature Air Bake of Stainless Steel for Very Low Outgassing Rates Surface Conditioning will describe the process used for cleaning and processing stainless steel. As examples I will use our as good as ever. #12;Summary of the Cleaning Process for Stainless Steel (e.g. 316 L) 1. Keep the items

  20. Erroneous coal maturity assessment caused by low temperature oxidation

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Erroneous coal maturity assessment caused by low temperature oxidation Y. Copard J. R. Disnar, J. F on different outcrop coals from the French Massif Central revealed abnormally high Tmax values, which initially observed for medium to low volatile bituminous coals (Rr1.5%), was accompanied by a very clear exponential

  1. Low Temperature Geothermal Waste-Heat-to-Power 

    E-Print Network [OSTI]

    Tidwell, Preston J

    2014-09-21

    , to be considered as a Low Temperature Geothermal (LTG) resource, meaning capable of electricity generation. This hot fluid combination of hydrocarbons and water can be run through an Organic Rankine Power Cycle (ORC) for effective Waste-Heat-to-Power generation...

  2. Radiant energy collector. [Patent application

    DOE Patents [OSTI]

    McIntire, W.R.

    1980-02-14

    A cylindrical radiant energy collector is provided which includes a reflector spaced apart from an energy absorber. The reflector is of a particular shape which ideally eliminates gap losses.

  3. In-Cylinder Processes of EGR-Diluted Low-Load, Low-Temperature...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Model for Partially PremixedLow-Temperature Diesel Combustion Based onIn-Cylinder Laser Diagnostics and Chemical Kinetics Modeling Heavy-Duty Low-Temperature and Diesel...

  4. Heavy-Duty Low-Temperature and Diesel Combustion & Heavy-Duty...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Heavy-Duty Low-Temperature and Diesel Combustion & Heavy-Duty Combustion Modeling Heavy-Duty Low-Temperature and Diesel Combustion &...

  5. Sources of UHC and CO in Low Temperature Automotive Diesel Combustion...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    UHC and CO in Low Temperature Automotive Diesel Combustion Systems Sources of UHC and CO in Low Temperature Automotive Diesel Combustion Systems Presentation given at the 16th...

  6. COMPARISON OF PROPORTIONAL AND ON/OFF COLLECTOR LOOP CONTROL STRATEGIES USING A DYNAMIC COLLECTOR MODEL

    E-Print Network [OSTI]

    Schiller, Steven R.

    2013-01-01

    liquid through flat-plate solar collectors are disc~ssed andDYNM1IC The FLAT~PLATE SOLAR COLLECTOR MODEL Hottel~\\>of a flat~plate solar collector. The model is based upon a

  7. Analysis of Low-Temperature Utilization of Geothermal Resources

    SciTech Connect (OSTI)

    Anderson, Brian

    2015-06-30

    Full realization of the potential of what might be considered “low-grade” geothermal resources will require that we examine many more uses for the heat than traditional electricity generation. To demonstrate that geothermal energy truly has the potential to be a national energy source we will be designing, assessing, and evaluating innovative uses for geothermal-produced water such as hybrid biomass-geothermal cogeneration of electricity and district heating and efficiency improvements to the use of cellulosic biomass in addition to utilization of geothermal in district heating for community redevelopment projects. The objectives of this project were: 1) to perform a techno-economic analysis of the integration and utilization potential of low-temperature geothermal sources. Innovative uses of low-enthalpy geothermal water were designed and examined for their ability to offset fossil fuels and decrease CO2 emissions. 2) To perform process optimizations and economic analyses of processes that can utilize low-temperature geothermal fluids. These processes included electricity generation using biomass and district heating systems. 3) To scale up and generalize the results of three case study locations to develop a regionalized model of the utilization of low-temperature geothermal resources. A national-level, GIS-based, low-temperature geothermal resource supply model was developed and used to develop a series of national supply curves. We performed an in-depth analysis of the low-temperature geothermal resources that dominate the eastern half of the United States. The final products of this study include 17 publications, an updated version of the cost estimation software GEOPHIRES, and direct-use supply curves for low-temperature utilization of geothermal resources. The supply curves for direct use geothermal include utilization from known hydrothermal, undiscovered hydrothermal, and near-hydrothermal EGS resources and presented these results at the Stanford Geothermal Workshop. We also have incorporated our wellbore model into TOUGH2-EGS and began coding TOUGH2-EGS with the wellbore model into GEOPHIRES as a reservoir thermal drawdown option. Additionally, case studies for the WVU and Cornell campuses were performed to assess the potential for district heating and cooling at these two eastern U.S. sites.

  8. Cubic Ideal Ferromagnets at Low Temperature and Weak Magnetic Field

    E-Print Network [OSTI]

    Christoph P. Hofmann

    2015-11-10

    The low-temperature series for the free energy density, pressure, magnetization and susceptibility of cubic ideal ferromagnets in weak external magnetic fields are discussed within the effective Lagrangian framework up to three loops. The structure of the simple, body-centered, and face-centered cubic lattice is taken into account explicitly. The expansion involves integer and half-integer powers of the temperature. The corresponding coefficients depend on the magnetic field and on low-energy effective constants that can be expressed in terms of microscopic quantities. Our formulas may also serve as efficiency or consistency check for other techniques like Green's function methods, where spurious terms in the low-temperature expansion have appeared. We explore the sign and magnitude of the spin-wave interaction in the pressure, magnetization and susceptibility, and emphasize that our effective field theory approach is fully systematic and rigorous.

  9. Method and apparatus for low temperature destruction of halogenated hydrocarbons

    DOE Patents [OSTI]

    Reagen, William Kevin (Stillwater, MN); Janikowski, Stuart Kevin (Idaho Falls, ID)

    1999-01-01

    A method and apparatus for decomposing halogenated hydrocarbons are provided. The halogenated hydrocarbon is mixed with solvating agents and maintained in a predetermined atmosphere and at a predetermined temperature. The mixture is contacted with recyclable reactive material for chemically reacting with the recyclable material to create dehalogenated hydrocarbons and halogenated inorganic compounds. A feature of the invention is that the process enables low temperature destruction of halogenated hydrocarbons.

  10. Auburn low-temperature geothermal well. Volume 6. Final report

    SciTech Connect (OSTI)

    Lynch, R.S.; Castor, T.P.

    1983-12-01

    The Auburn well was drilled to explore for low temperature geothermal resources in central New York State. The Auburn site was selected based on: its proximity to the Cayuga County anomaly (30/sup 0/C/km), its favorable local geological conditions and the potential to provide hot water and space heating to two educational facilities. The well was drilled to a total depth of 5250 feet and into the Pre-Cambrian Basement. The well was extensively logged, flow and stress tested, hydraulically stimulated, and pump (pressure transient analysis) tested. The low-temperature geothermal potential was assessed in terms of: geological environment; hydrological conditions; reservoir characteristics; and recoverable hydrothermal reserves. The average geothermal gradient was measured to be as high as 26.7/sup 0/C/km with a bottom-hole temperature of 126/sup 0/ +- 1/sup 0/F. The proved volumetric resources were estimated to be 3.0 x 10/sup 6/ stock tank barrels (STB) with a maximum initial deliverability of approx.11,600 STB/D and a continuous deliverability of approx.3400 STB/D. The proved hydrothermal reserves were estimated to be 21.58 x 10/sup 10/ Btu based on a volumetric component (4.13 x 10/sup 10/ Btu), and a reinjection component (17.45 x 10/sup 10/ Btu). The conclusion was made that the Auburn low-temperature reservoir could be utilized to provide hot water and space heating to the Auburn School District.

  11. COMPARISON OF PROPORTIONAL AND ON/OFF SOLAR COLLECTOR LOOP CONTROL STRATEGIES USING A DYNAMIC COLLECTOR MODEL

    E-Print Network [OSTI]

    Schiller, Steven R.

    2013-01-01

    Thermostats For Solar Collector Systems." inter-officeof Flat-Plate Solar Collectors." M.S. Thesis, University ofof Flat-Plate Solar Collectors." ASME Journal of Engineering

  12. The design of a pre-collector for cyclone collectors 

    E-Print Network [OSTI]

    Mihalski, Karl Duane

    1996-01-01

    Tests were conducted on small laboratory scale ID-3D and 2D-2D cyclones to demonstrate the reduction in emission concentrations resulting when a pre-cyclone collector is used to collect large trash particles prior to cyclone fine dust collection...

  13. Corrugated cover plate for flat plate collector

    DOE Patents [OSTI]

    Hollands, K. G. Terry (Elora, CA); Sibbitt, Bruce (Waterloo, CA)

    1978-01-01

    A flat plate radiant energy collector is providing having a transparent cover. The cover has a V-corrugated shape which reduces the amount of energy reflected by the cover away from the flat plate absorber of the collector.

  14. SELECTIVE ABSORBER COATED FOILS FOR SOLAR COLLECTORS

    E-Print Network [OSTI]

    Lampert, Carl M.

    2013-01-01

    p. 1080. AES Second Coatings for Solar Collectors Symp. , 11coating concept is to use heavy starting stock which might be suitable for direct fabrication of solar collectorsolar collector panels. Here the major consideration is whether the coating

  15. ADVANCED HYBRID PARTICULATE COLLECTOR

    SciTech Connect (OSTI)

    Ye Zhuang; Stanley J. Miller; Michelle R. Olderbak; Rich Gebert

    2001-12-01

    A new concept in particulate control, called an advanced hybrid particulate collector (AHPC), is being developed under funding from the U.S. Department of Energy. The AHPC combines the best features of electrostatic precipitators (ESPs) and baghouses in an entirely novel manner. The AHPC concept combines fabric filtration and electrostatic precipitation in the same housing, providing major synergism between the two methods, both in the particulate collection step and in transfer of dust to the hopper. The AHPC provides ultrahigh collection efficiency, overcoming the problem of excessive fine-particle emissions with conventional ESPs, and solves the problem of reentrainment and re-collection of dust in conventional baghouses. Phase I of the development effort consisted of design, construction, and testing of a 5.7-m{sup 3}/min (200-acfm) working AHPC model. Results from both 8-hr parametric tests and 100-hr proof-of-concept tests with two different coals demonstrated excellent operability and greater than 99.99% fine-particle collection efficiency. Since all of the developmental goals of Phase I were met, the approach was scaled up in Phase II to a size of 255 m{sup 3}/min (9000 acfm) (equivalent in size to 2.5 MW) and was installed on a slipstream at the Big Stone Power Plant. For Phase II, the AHPC at Big Stone Power Plant was operated continuously from late July 1999 until mid-December 1999. The Phase II results were highly successful in that ultrahigh particle collection efficiency was achieved, pressure drop was well controlled, and system operability was excellent. For Phase III, the AHPC was modified into a more compact configuration, and components were installed that were closer to what would be used in a full-scale commercial design. The modified AHPC was operated from April to July 2000. While operational results were acceptable during this time, inspection of bags in the summer of 2000 revealed some membrane damage to the fabric that appeared to be caused by electrical effects. Subsequently, extensive theoretical, bench-scale, and pilot-scale investigations were completed to find an approach to prevent bag damage without compromising AHPC performance. Results showed that the best bag protection and AHPC performance were achieved by using a perforated plate installed between the discharge electrodes and bags. This perforated-plate design was then installed in the 2.5-MW AHPC at Big Stone Power Plant in Big Stone City, South Dakota, and the AHPC was operated from March to June 2001. Results showed that the perforated-plate design solved the bag damage problem and offered even better AHPC performance than the previous design. All of the AHPC performance goals were met, including ultrahigh collection efficiency, high air-to-cloth ratio, reasonable pressure drop, and long bag-cleaning interval.

  16. Yttrium oxide transparent ceramics by low-temperature microwave sintering

    SciTech Connect (OSTI)

    Luo, Junming, E-mail: ljmniat@126.com [School of Materials Science and Engineering, Nanchang Hangkong University, Nanchang 330063 (China)] [School of Materials Science and Engineering, Nanchang Hangkong University, Nanchang 330063 (China); Zhong, Zhenchen; Xu, Jilin [School of Materials Science and Engineering, Nanchang Hangkong University, Nanchang 330063 (China)] [School of Materials Science and Engineering, Nanchang Hangkong University, Nanchang 330063 (China)

    2012-12-15

    Graphical abstract: The figure shows the SEM photos of the surfaces of the Y{sub 2}O{sub 3} transparent ceramic samples obtained by microwave sintering and vacuum sintering. It is clearly demonstrated that the grain distribution of the vacuum sintering sample is not uniform with the smallest and the largest particle size at about 2 ?m and 15 ?m respectively, while the grain distribution of microwave sintering sample is uniform with the average diameter at about 2–4 ?m (the smallest reported so far) and with no abnormal growth-up or coarsening phenomenon. We have further found out that the smaller the grain size, the higher the mechanical and optical properties. Display Omitted Highlights: ? The microwave sintering temperature of the sample is lower compared with vacuum. ? The microwave sintering time of the sample is shorter compared with vacuum. ? The mechanical properties of the microwave sintering sample is improved greatly. ? The Y{sub 2}O{sub 3} grain of microwave sintering sample is the smallest reported so far. -- Abstract: Yttrium oxide (Y{sub 2}O{sub 3}) transparent ceramics samples have been successfully fabricated by microwave sintering processing at relatively low temperatures. In comparison with the vacuum sintering processing, Y{sub 2}O{sub 3} transparent ceramics can be obtained by microwave sintering at lower sintering temperature and shorter sintering time, and they possess higher transmittances and mechanical properties. The technologies of low-temperature microwave sintering and the relationships of the microstructures and properties of the specified samples have been investigated in detail. We have found out that the low-temperature microwave sintering technique has its obvious advantages over the conventional methods in manufacturing yttrium oxide transparent ceramics.

  17. Low temperature properties of some Er-rich intermetallic compounds

    SciTech Connect (OSTI)

    K.A. Gshneidner,jr; A.O. Pecharsky; L.Hale; V.K. Pecharsky

    2004-09-30

    The low temperature volumetric heat capacity ({approx}3.5 to 350 K) and magnetic susceptibility ({approx}4 to 320 K) of Er{sub 3}Rh, Er{sub 3}Ir, Er{sub 3}Pt, Er{sub 2}Al, and Er{sub 2}Sn have been measured. All of the compounds order antiferromagnetically (or ferrimagnetically), and most exhibit more than one magnetic ordering transition. The volumetric heat capacities in general are smaller than those of the prototype magnetic regenerator materials, except for Er{sub 3}Ir in the 12 to 14 K temperature range.

  18. Thermally Stable Ultra-Low Temperature Oxidation Catalysts

    SciTech Connect (OSTI)

    Szanyi, Janos; Peden, Charles HF; Howden, Ken; Kim, Chang H.; Oh, Se H.; Schmieg, Steven J.

    2014-12-09

    This annual reports describes recent results of a CRADA between General Motors Company (GM) and Battelle/Pacific Northwest National Laboratory (PNNL). In the CRADA, we are investigating a number of candidate low temperature oxidation catalysts as fresh materials, and after realistic laboratory- and engine-aging. These studies will lead to a better understanding of fundamental characteristics and various aging factors that impact the long-term performance of catalysts, while also providing an assessment of the appropriateness of the laboratory conditions in realistically reproducing the effects of actual engine aging conditions.

  19. Engineered Nanostructured MEA Technology for Low Temperature Fuel Cells

    SciTech Connect (OSTI)

    Zhu, Yimin

    2009-07-16

    The objective of this project is to develop a novel catalyst support technology based on unique engineered nanostructures for low temperature fuel cells which: (1) Achieves high catalyst activity and performance; (2) Improves catalyst durability over current technologies; and (3) Reduces catalyst cost. This project is directed at the development of durable catalysts supported by novel support that improves the catalyst utilization and hence reduce the catalyst loading. This project will develop a solid fundamental knowledge base necessary for the synthetic effort while at the same time demonstrating the catalyst advantages in Direct Methanol Fuel Cells (DMFCs).

  20. AAPG Low-Temperature Webinar | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative FuelsofProgram:Y-12 Beta-3 Racetracks25 AMOSystem forAAPG Low-Temperature Webinar AAPG

  1. Multiple discharge cylindrical pump collector

    SciTech Connect (OSTI)

    Dunn, C.; Bremmer, R.J.; Meng, S.Y.

    1989-10-17

    This patent describes an improvement in a method for circulating fluid coolant through a reactor core of a pool-type nuclear reactor having a sealed containment vessel containing a reactor core submersed in a body of liquid coolant. The method for circulating coolant including utilization of a rotary pump including an impeller for producing a highly circumferential flow of cooling fluid and a method for collecting and discharging coolant fluid, the improvement to the method of collecting and discharging coolant fluid including the steps of: producing a substantially uniform circumferential flow of the fluid by directing the flow through a plurality of diffuser vanes and into an annular collector located radially outboard from the impeller. The annular collector having an entirely closed outer periphery; and turning the flow of cooling fluid into a substantially axially direction while maintaining a substantially constant average flow velocity by directing the coolant flow from the annular collector into a plurality of individual passageways located in an axial position relative to the annular collector.

  2. Material for electrodes of low temperature plasma generators

    DOE Patents [OSTI]

    Caplan, Malcolm (Fremont, CA); Vinogradov, Sergel Evge'evich (St. Peterburg, RU); Ribin, Valeri Vasil'evich (St. Peterburg, RU); Shekalov, Valentin Ivanovich (St. Peterburg, RU); Rutberg, Philip Grigor'evich (St. Peterburg, RU); Safronov, Alexi Anatol'evich (St. Peterburg, RU)

    2008-12-09

    Material for electrodes of low temperature plasma generators. The material contains a porous metal matrix impregnated with a material emitting electrons. The material uses a mixture of copper and iron powders as a porous metal matrix and a Group IIIB metal component such as Y.sub.2O.sub.3 is used as a material emitting electrons at, for example, the proportion of the components, mass %: iron: 3-30; Y.sub.2O.sub.3:0.05-1; copper: the remainder. Copper provides a high level of heat conduction and electric conductance, iron decreases intensity of copper evaporation in the process of plasma creation providing increased strength and lifetime, Y.sub.2O.sub.3 provides decreasing of electronic work function and stability of arc burning. The material can be used for producing the electrodes of low temperature AC plasma generators used for destruction of liquid organic wastes, medical wastes, and municipal wastes as well as for decontamination of low level radioactive waste, the destruction of chemical weapons, warfare toxic agents, etc.

  3. Material for electrodes of low temperature plasma generators

    DOE Patents [OSTI]

    Caplan, Malcolm (Fremont, CA); Vinogradov, Sergel Evge'evich (St. Peterburg, RU); Ribin, Valeri Vasil'evich (St. Peterburg, RU); Shekalov, Valentin Ivanovich (St. Peterburg, RU); Rutberg, Philip Grigor'evich (St. Peterburg, RU); Safronov, Alexi Anatol'evich (St. Peterburg, RU); Shiryaev, Vasili Nikolaevich (St. Peterburg, RU)

    2010-03-02

    Material for electrodes of low temperature plasma generators. The material contains a porous metal matrix impregnated with a material emitting electrons. The material uses a mixture of copper and iron powders as a porous metal matrix and a Group IIIB metal component such as Y.sub.2O.sub.3 is used as a material emitting electrons at, for example, the proportion of the components, mass %: iron:3-30; Y.sub.2O.sub.3:0.05-1; copper: the remainder. Copper provides a high level of heat conduction and electric conductance, iron decreases intensity of copper evaporation in the process of plasma creation providing increased strength and lifetime, Y.sub.2O.sub.3 provides decreasing of electronic work function and stability of arc burning. The material can be used for producing the electrodes of low temperature AC plasma generators used for destruction of liquid organic wastes, medical wastes, municipal wastes as well as for decontamination of low level radioactive waste, the destruction of chemical weapons, warfare toxic agents, etc.

  4. Sustained concrete attack by low-temperature, fragmented core debris

    SciTech Connect (OSTI)

    Tarbell, W.W.; Bradley, D.R.; Blose, R.E.; Ross, J.W.; Gilbert, D.W.

    1987-07-01

    Four experiments were performed to study the interactions between low-temperature core debris and concretes typical of reactor structures. The tests addressed accident situations where the core debris is at elevated temperature, but not molten. Concrete crucibles were formed in right-circular cylinders with 45 kg of steel spheres (approx.3-mm diameter) as the debris simulant. The debris was heated by an inductive power supply to nominal temperatures of 1473 K to 1673 K. Two tests were performed on each of two concrete types using either basalt or limestone aggregate. For each concrete, one test was performed with water atop the debris while the second had no water added. The results show that low-temperature core debris will erode either basalt or limestone-common sand concretes. Downward erosion rates of 3 to 4 cm/hr were recorded for both concrete types. The limestone concrete produced a crust layer within the debris bed that was effective in preventing the downward intrusion of water. The basalt concrete crust was formed above the debris and consisted of numerous, convoluted, thin layers. Carbon dioxide and water release from the decomposition of concrete were partially reduced by the metallic debris to yield carbon monoxide and hydrogen, respectively. The overlying water pool did not effect the reduction reactions.

  5. Crystallization and doping of amorphous silicon on low temperature plastic

    DOE Patents [OSTI]

    Kaschmitter, J.L.; Truher, J.B.; Weiner, K.H.; Sigmon, T.W.

    1994-09-13

    A method or process of crystallizing and doping amorphous silicon (a-Si) on a low-temperature plastic substrate using a short pulsed high energy source in a selected environment, without heat propagation and build-up in the substrate is disclosed. The pulsed energy processing of the a-Si in a selected environment, such as BF3 and PF5, will form a doped micro-crystalline or poly-crystalline silicon (pc-Si) region or junction point with improved mobilities, lifetimes and drift and diffusion lengths and with reduced resistivity. The advantage of this method or process is that it provides for high energy materials processing on low cost, low temperature, transparent plastic substrates. Using pulsed laser processing a high (>900 C), localized processing temperature can be achieved in thin films, with little accompanying temperature rise in the substrate, since substrate temperatures do not exceed 180 C for more than a few microseconds. This method enables use of plastics incapable of withstanding sustained processing temperatures (higher than 180 C) but which are much lower cost, have high tolerance to ultraviolet light, have high strength and good transparency, compared to higher temperature plastics such as polyimide. 5 figs.

  6. Crystallization and doping of amorphous silicon on low temperature plastic

    DOE Patents [OSTI]

    Kaschmitter, James L. (Pleasanton, CA); Truher, Joel B. (Palo Alto, CA); Weiner, Kurt H. (Campbell, CA); Sigmon, Thomas W. (Beaverton, OR)

    1994-01-01

    A method or process of crystallizing and doping amorphous silicon (a-Si) on a low-temperature plastic substrate using a short pulsed high energy source in a selected environment, without heat propagation and build-up in the substrate. The pulsed energy processing of the a-Si in a selected environment, such as BF3 and PF5, will form a doped micro-crystalline or poly-crystalline silicon (pc-Si) region or junction point with improved mobilities, lifetimes and drift and diffusion lengths and with reduced resistivity. The advantage of this method or process is that it provides for high energy materials processing on low cost, low temperature, transparent plastic substrates. Using pulsed laser processing a high (>900.degree. C.), localized processing temperature can be achieved in thin films, with little accompanying temperature rise in the substrate, since substrate temperatures do not exceed 180.degree. C. for more than a few microseconds. This method enables use of plastics incapable of withstanding sustained processing temperatures (higher than 180.degree. C.) but which are much lower cost, have high tolerance to ultraviolet light, have high strength and good transparency, compared to higher temperature plastics such as polyimide.

  7. Solar-collector manufacturing activity, July through December, 1981

    SciTech Connect (OSTI)

    None

    1982-03-01

    Solar thermal collector and solar cell manufacturing activity is both summarized and tabulated. Data are compared for three survey periods (July through December, 1981; January through June, 1981; and July through December, 1980). Annual totals are also provided for the years 1979 through 1981. Data include total producer shipments, end use, market sector, imports and exports. (LEW)

  8. California low-temperature geothermal resources update: 1993

    SciTech Connect (OSTI)

    Youngs, L.G.

    1994-12-31

    The US Department of Energy -- Geothermal Division (DOE/GD) recently sponsored the Low-Temperature Geothermal Resources and Technology Transfer Program to bring the inventory of the nation`s low- and moderate-temperature geothermal resources up to date and to encourage development of the resources. The Oregon Institute of Technology, Geo-Heat Center (OIT/GHC) and the University of Utah Research Institute (UURI) established subcontracts and coordinated the project with the state resource teams from the western states that participated in the program. The California Department of Conservation, Division of Mines and Geology (DMG) entered into contract numbered 1092--023(R) with the OIT/GHC to provide the California data for the program. This report is submitted in fulfillment of that contract.

  9. Chiral dynamics in the low-temperature phase of QCD

    E-Print Network [OSTI]

    Bastian B. Brandt; Anthony Francis; Harvey B. Meyer; Daniel Robaina

    2014-10-22

    We investigate the low-temperature phase of QCD and the crossover region with two light flavors of quarks. The chiral expansion around the point $(T, m_q = 0)$ in the temperature vs. quark-mass plane indicates that a sharp real-time excitation exists with the quantum numbers of the pion. We determine its dispersion relation and test the applicability of the chiral expansion. The time-dependent correlators are also analyzed using the Maximum Entropy Method (MEM), yielding consistent results. Finally, we test the predictions of ordinary chiral perturbation theory around the point $(T = 0, m_q = 0)$ for the temperature dependence of static observables. Around the crossover temperature, we find that all quantities considered depend only mildly on the quark mass in the considered range 8MeV $\\leq \\bar{m}^{\\bar{\\text{MS}}} \\leq$ 15MeV.

  10. Method for low temperature preparation of a noble metal alloy

    DOE Patents [OSTI]

    Even, Jr., William R. (Livermore, CA)

    2002-01-01

    A method for producing fine, essentially contamination free, noble metal alloys is disclosed. The alloys comprise particles in a size range of 5 to 500 nm. The method comprises 1. A method for preparing a noble metal alloy at low temperature, the method comprising the steps of forming solution of organometallic compounds by dissolving the compounds into a quantity of a compatible solvent medium capable of solvating the organometallic, mixing a portion of each solution to provide a desired molarity ratio of ions in the mixed solution, adding a support material, rapidly quenching droplets of the mixed solution to initiate a solute-solvent phase separation as the solvent freezes, removing said liquid cryogen, collecting and freezing drying the frozen droplets to produce a dry powder, and finally reducing the powder to a metal by flowing dry hydrogen over the powder while warming the powder to a temperature of about 150.degree. C.

  11. A Low Temperature Expansion for Matrix Quantum Mechanics

    E-Print Network [OSTI]

    Ying-Hsuan Lin; Shu-Heng Shao; Yifan Wang; Xi Yin

    2013-04-08

    We analyze solutions to loop-truncated Schwinger-Dyson equations in massless N=2 and N=4 Wess-Zumino matrix quantum mechanics at finite temperature, where conventional perturbation theory breaks down due to IR divergences. We find a rather intricate low temperature expansion that involves fractional power scaling in the temperature, based on a consistent "soft collinear" approximation. We conjecture that at least in the N=4 matrix quantum mechanics, such scaling behavior holds to all perturbative orders in the 1/N expansion. We discuss some preliminary results in analyzing the gauged supersymmetric quantum mechanics using Schwinger-Dyson equations, and comment on the connection to metastable microstates of black holes in the holographic dual of BFSS matrix quantum mechanics.

  12. Low-temperature hermetic sealing of optical fiber components

    SciTech Connect (OSTI)

    Kramer, D.P.

    1995-12-31

    A method for manufacturing low-temperature hermetically sealed optical fiber components is provided. The method comprises the steps of: inserting an optical fiber into a housing, the optical fiber having a glass core, a glass cladding and a protective buffer layer disposed around the core and cladding; heating the housing to a predetermined temperature, the predetermined temperature being below a melting point for the protective buffer layer and above a melting point of a solder; placing the solder in communication with the heated housing to allow the solder to form an eutectic and thereby fill a gap between the interior of the housing and the optical fiber; and cooling the housing to allow the solder to form a hermetic compression seal between the housing and the optical fiber.

  13. Electromagnetic Isolation Solutions in Low Temperature Cofired Ceramic (LTCC)

    SciTech Connect (OSTI)

    Krueger, Daniel; Peterson, Ken; Euler, Laurie

    2011-10-09

    Low Temperature Cofired Ceramic (LTCC) is a commercial ceramic-glass multilayer technology with compelling advantages for microelectronics, microsystems and sensors. High frequency applications require good electrical properties such as low dielectric loss and newer applications require extreme isolation from electromagnetic interference (EMI) that is even difficult to measure (-150db). Approaches to providing this isolation, once provided by via fences, have included sidewall coating and full tape thickness features (FTTF) that have been introduced by the filling of slots with via-fill compositions. Several techniques for creating these structures have been modeled for stress and temperature effects in the face of other necessary attachments, such as metallic seal frames. The relative effects of attachment media, FTTF geometry, and alternative measures will be reported. Approaches for thick film and thin film implementations are described.

  14. Low-temperature hermetic sealing of optical fiber components

    DOE Patents [OSTI]

    Kramer, Daniel P. (Centerville, OH)

    1996-10-22

    A method for manufacturing low-temperature hermetically sealed optical fi components is provided. The method comprises the steps of: inserting an optical fiber into a housing, the optical fiber having a glass core, a glass cladding and a protective buffer layer disposed around the core and cladding; heating the housing to a predetermined temperature, the predetermined temperature being below a melting point for the protective buffer layer and above a melting point of a solder; placing the solder in communication with the heated housing to allow the solder to form an eutectic and thereby fill a gap between the interior of the housing and the optical fiber; and cooling the housing to allow the solder to form a hermetic compression seal between the housing and the optical fiber.

  15. Low-temperature hermetic sealing of optical fiber components

    DOE Patents [OSTI]

    Kramer, D.P.

    1996-10-22

    A method for manufacturing low-temperature hermetically sealed optical fiber components is provided. The method comprises the steps of: inserting an optical fiber into a housing, the optical fiber having a glass core, a glass cladding and a protective buffer layer disposed around the core and cladding; heating the housing to a predetermined temperature, the predetermined temperature being below a melting point for the protective buffer layer and above a melting point of a solder; placing the solder in communication with the heated housing to allow the solder to form an eutectic and thereby fill a gap between the interior of the housing and the optical fiber; and cooling the housing to allow the solder to form a hermetic compression seal between the housing and the optical fiber. 5 figs.

  16. Investigation of Bio-Diesel Fueled Engines under Low-Temperature...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Bio-Diesel Fueled Engines under Low-Temperature Combustion Strategies Investigation of Bio-Diesel Fueled Engines under Low-Temperature Combustion Strategies ftp01lee.pdf More...

  17. Development of a Durable Low-Temperature Urea-SCR Catalyst for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Durable Low-Temperature Urea-SCR Catalyst for CIDI Engines Development of a Durable Low-Temperature Urea-SCR Catalyst for CIDI Engines 2004 Diesel Engine Emissions Reduction (DEER)...

  18. Sources of CO and UHC Emissions in Low-Temperature Diesel Combustion...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CO and UHC Emissions in Low-Temperature Diesel Combustion Systems Sources of CO and UHC Emissions in Low-Temperature Diesel Combustion Systems The sources of unburned hydrocarbons...

  19. Analysis of a Dedicated Outdoor Air System and Low Temperature Supply Air Conditioning System 

    E-Print Network [OSTI]

    Guang, L.; Li, R.

    2006-01-01

    This paper presents the principles and the characteristics of a dedicated outdoor air system (DOAS) and low temperature supply air system. DOAS is offered based on the demands of indoor air quality and the low temperature supply air system...

  20. Combining Biodiesel and EGR for Low-Temperature NOx and PM Reductions...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Biodiesel and EGR for Low-Temperature NOx and PM Reductions Combining Biodiesel and EGR for Low-Temperature NOx and PM Reductions Poster presentation at the 2007 Diesel...

  1. Low-Temperature Combustion for High-Efficiency, Ultra-Low Emission...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Low-Temperature Combustion for High-Efficiency, Ultra-Low Emission Engines Low-Temperature Combustion for High-Efficiency, Ultra-Low Emission Engines Presentation given at DEER...

  2. Fuel Effects on Low Temperature Combustion in a Light-Duty Diesel...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Low Temperature Combustion in a Light-Duty Diesel Engine Fuel Effects on Low Temperature Combustion in a Light-Duty Diesel Engine Six different fuels were investigated to study the...

  3. Combining Low-Temperature Combustion with Lean-NOx Trap Yields...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Low-Temperature Combustion with Lean-NOx Trap Yields Progress Toward Targets of Efficient NOx Control for Diesels Combining Low-Temperature Combustion with Lean-NOx Trap Yields...

  4. Low-Temperature Geothermal Resources, Geothermal Technologies Program (GTP) (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2010-05-01

    This document highlights the applications of low-temperature geothermal resources and the potential for future uses as well as current Geothermal Technologies Program-funded projects related to low-temperature resources.

  5. Thermodynamic Advantages of Low Temperature Combustion Engines Including the Use of Low Heat Rejection Concepts

    Broader source: Energy.gov [DOE]

    Thermodynamic cycle simulation was used to evaluate low temperature combustion in systematic and sequential fashion to base engine design.

  6. Low-temperature Scanning Tunneling Spectroscopy of Semiconductor Surfaces R. M. Feenstra1

    E-Print Network [OSTI]

    Feenstra, Randall

    1 Low-temperature Scanning Tunneling Spectroscopy of Semiconductor Surfaces R. M. Feenstra1 Low-temperature scanning tunneling spectroscopy measurements on semiconductor surface are described that measurements at low temperatures have been conducted. Most notably, discrete accumulation layer states have

  7. Magnetic structure at low temperatures in FeGe{sub 2}

    SciTech Connect (OSTI)

    Babu, P. D.; Mishra, P. K.; Dube, V.; Ravikumar, G.; Mishra, R.; Sastry, P. U.

    2014-04-24

    Magnetic phase of FeGe{sub 2} intermetallic is studied using low-temperature neutron diffraction and DC magnetization. Zero-magnetic-field neutron scattering data shows the presence of an antiferromagnetic phase in the low temperature range. We find the evidence of the presence of a ferromagnetic order overriding on the predominantly antiferromagnetic phase at low temperatures.

  8. Application of flash-assist rapid thermal processing subsequent to low-temperature furnace anneals

    E-Print Network [OSTI]

    Florida, University of

    Application of flash-assist rapid thermal processing subsequent to low-temperature furnace anneals and then implanted with 1 keV, 1 1015 cm-2 B. Low-temperature furnace anneals are performed at 500 °C for 30 minV. Implants were per- formed at a standard tilt of 7° and twist of 27°. Low- temperature furnace anneals were

  9. MINICHANNEL-TUBE SOLAR THERMAL COLLECTORS FOR LOW TO MEDIUM TEMPERATURE APPLICATIONS

    E-Print Network [OSTI]

    Duong, Van Thuc

    2015-01-01

    of copper minichannel solar collector . . . . SteamMinichannel Solar Collector Design . . . . . . . . . . . . .of Copper Minichannel Solar Collector During Two-Phase

  10. A SOLAR TEST COLLECTOR FOR EVALUATION OF BOTH SELECTIVE AND NON-SELECTIVE ABSORBERS

    E-Print Network [OSTI]

    Lampert, Carl M.

    2011-01-01

    Standards for Testing Solar Collectors and Thermal Storagethe Performance of Flat-Rate Solar Collectors" University ofstandards for testing solar collectors. l Collectors are

  11. GEM operation in helium and neon at low temperatures

    E-Print Network [OSTI]

    Buzulutskov, A F; Galea, R; Ju, Y; Leltchouk, M; Rehak, P; Tcherniatine, V; Willis, W J; Bondar, A; Pavlyuchenko, D; Snopkov, R; Tikhonov, Yu A

    2005-01-01

    We study the performance of Gas Electron Multipliers (GEMs) in gaseous He, Ne and Ne+H2 at temperatures in the range of 2.6-293 K. In He, at temperatures between 62 and 293 K, the triple-GEM structures often operate at rather high gains, exceeding 1000. There is an indication that this high gain is achieved by Penning effect in the gas impurities released by outgassing. At lower temperatures the gain-voltage characteristics are significantly modified probably due to the freeze-out of impurities. In particular, the double-GEM and single-GEM structures can operate down to 2.6 K at gains reaching only several tens at a gas density of about 0.5 g/l; at higher densities the maximum gain drops further. In Ne, the maximum gain also drops at cryogenic temperatures. The gain drop in Ne at low temperatures can be reestablished in Penning mixtures of Ne+H2: very high gains, exceeding 10000, have been obtained in these mixtures at 50-60 K, at a density of 9.2 g/l corresponding to that of saturated Ne vapor near 27 K. The...

  12. Low-temperature catalytic gasification of wet industrial wastes

    SciTech Connect (OSTI)

    Elliott, D C; Neuenschwander, G G; Baker, E G; Sealock, Jr, L J; Butner, R S

    1991-04-01

    Bench-scale reactor tests are in progress at Pacific Northwest Laboratory to develop a low-temperature, catalytic gasification system. The system, licensed under the trade name Thermochemical Environmental Energy System (TEES{reg sign}), is designed for treating a wide variety of feedstocks ranging from dilute organics in water to waste sludges from food processing. This report describes a test program which used a continuous-feed tubular reactor. This test program is an intermediate stage in the process development. The reactor is a laboratory-scale version of the commercial concept as currently envisioned by the process developers. An energy benefit and economic analysis was also completed on the process. Four conceptual commercial installations of the TEES process were evaluated for three food processing applications and one organic chemical manufacturing application. Net energy production (medium-Btu gas) was achieved in all four cases. The organic chemical application was found to be economically attractive in the present situation. Based on sensitivity studies included in the analysis, the three food processing cases will likely become attractive in the near future as waste disposal regulations tighten and disposal costs increase. 21 refs., 2 figs., 9 tabs.

  13. Deconfinement Transition at High Isospin Chemical Potential and Low Temperature

    E-Print Network [OSTI]

    Cohen, Thomas D

    2015-01-01

    We consider QCD with two degenerate flavors of light quarks(up and down) at asymptotically high isospin and zero baryon chemical potential. In this regime and sufficiently low temperatures this theory becomes equivalent to a pure Yang-Mills theory and accordingly has a first order phase transition. This paper relates the parameters of this equivalent Yang-Mills theory to those of the underlying theory. Physically, the picture is that in this limit anti-up quarks and down quarks have Fermi surfaces with radii equal to half of the chemical potential. At high temperatures, the gluons are Debye-screened by quark quasi-particles around the Fermi surface. As the temperature is lowered, a Fermi liquid with Cooper pairing of pairs of anti-up and down quarks forms giving rise to U(1)em superconductivity. The condensate is parity odd and color neutral. The gluons do not pick up Meissner mass due to the color neutrality of the condensate. At temperatures much lower than the gap, Debye screening is absent too, as the fer...

  14. Optimized Designs for Very Low Temperature Massive Calorimeters

    E-Print Network [OSTI]

    Pyle, Matt; Sadoulet, Bernard

    2015-01-01

    The baseline energy-resolution performance for the current generation of large-mass, low-temperature calorimeters is $>2$ orders of magnitude worse than theoretical predictions. A detailed study of several calorimetric detectors suggests that a mismatch between the sensor and signal bandwidths is the primary reason for suppressed sensitivity. With this understanding, we propose a detector design in which a thin-film Au pad is directly deposited onto a massive absorber that is then thermally linked to a separately fabricated TES chip via an Au wirebond, providing large electron-phonon coupling (i.e. high signal bandwidth), ease of fabrication, and cosmogenic background suppression. Interestingly, this design strategy is fully compatible with the use of hygroscopic crystals (NaI) as absorbers. An 80-mm diameter Si light detector based upon these design principles, with potential use in both dark matter and neutrinoless double-beta decay, has an estimated baseline energy resolution of 0.35eV, 20x better than cur...

  15. Low temperature high frequency coaxial pulse tube for space application

    SciTech Connect (OSTI)

    Charrier, Aurelia; Charles, Ivan; Rousset, Bernard; Duval, Jean-Marc [SBT, UMR-E CEA / UJF-Grenoble 1, INAC, 17, rue des Martyrs, Grenoble, F-38054 (France); Daniel, Christophe [CNES, 18, avenue Edouard Belin, Toulouse, F-31401 (France)

    2014-01-29

    The 4K stage is a critical step for space missions. The Hershel mission is using a helium bath, which is consumed day by day (after depletion, the space mission is over) while the Plank mission is equipped with one He4 Joule-Thomson cooler. Cryogenic chain without helium bath is a challenge for space missions and 4.2K Pulse-Tube working at high frequency (around 30Hz) is one option to take it up. A low temperature Pulse-Tube would be suitable for the ESA space mission EChO (Exoplanet Characterisation Observatory, expected launch in 2022), which requires around 30mW cooling power at 6K; and for the ESA space mission ATHENA (Advanced Telescope for High ENergy Astrophysics), to pre-cool the sub-kelvin cooler (few hundreds of mW at 15K). The test bench described in this paper combines a Gifford-McMahon with a coaxial Pulse-Tube. A thermal link is joining the intercept of the Pulse-Tube and the second stage of the Gifford-McMahon. This intercept is a separator between the hot and the cold regenerators of the Pulse-Tube. The work has been focused on the cold part of this cold finger. Coupled with an active phase shifter, this Pulse-Tube has been tested and optimized and temperatures as low as 6K have been obtained at 30Hz with an intercept temperature at 20K.

  16. Low-temperature radiation embrittlement of copper alloys

    SciTech Connect (OSTI)

    Fabritsiev, S.A. [D.V. Efremov Scientific Research Institute, (Russia)] Pokrovsky, A.S. [Scientific Research Institute of Atomic Reactors (Russia); Zinkle, S.J. [Oak Ridge National Lab., TN (United States); Edwards, D.J. [Pacific Northwest Lab., Richland, WA (United States)

    1995-12-31

    The effect of low-temperature (T{sub irr} less than 0.3. T{sub melt}) irradiation on the tensile properties of copper and precipitation-hardened (PH) and dispersion-strengthened (DS) copper alloys was investigated. Samples were irradiated with fission neutrons at temperatures of 80 to 200{degrees}C to doses of 0.6 to 5 dpa. Irradiation at temperatures <150{degrees}C resulted in significant hardening and accompanying embrittlement in all of the materials. By comparing the present results with literature data, it is concluded that severe radiation embrittlement occurs in copper alloys irradiated at temperatures {le}I00{degrees}C for doses above {approximately} 0.01 to 0.1 dpa. On the other hand, irradiation at temperatures above 150{degrees}C causes only moderate embrittlement for doses up to {approximately}5 dpa. It is recommended that the minimum operating temperature for copper alloys intended for structural applications in fusion energy systems should be 150{degrees}C, unless uniform elongations

  17. Centerless-drive solar collector system

    SciTech Connect (OSTI)

    Butler, B. L.

    1985-12-24

    A parabolic-trough solar collector system is disclosed, with each collector driven to track the sun using a ring driven in centerless fashion. The parabolic troughs are made of laminated plywood or molded or formed of plastics or metals. The drive motor moves a flexible belt, i.e., chain or cable, which is routed about the drive ring on each collector. The motion of the cable moves all drive rings together to track the sun. A photodetector senses the position of the sun and provides the signal needed to drive the collectors in the correct direction.

  18. Tubular solid oxide fuel cell current collector

    DOE Patents [OSTI]

    Bischoff, Brian L. (Knoxville, TN); Sutton, Theodore G. (Kingston, TN); Armstrong, Timothy R. (Clinton, TN)

    2010-07-20

    An internal current collector for use inside a tubular solid oxide fuel cell (TSOFC) electrode comprises a tubular coil spring disposed concentrically within a TSOFC electrode and in firm uniform tangential electrical contact with the electrode inner surface. The current collector maximizes the contact area between the current collector and the electrode. The current collector is made of a metal that is electrically conductive and able to survive under the operational conditions of the fuel cell, i.e., the cathode in air, and the anode in fuel such as hydrogen, CO, CO.sub.2, H.sub.2O or H.sub.2S.

  19. Self-Cleaning CSP Collectors

    Office of Energy Efficiency and Renewable Energy (EERE)

    This fact sheet details the efforts of a Boston University-led team which is working on a DOE SunShot Initative project. The concentrated solar power industry needs an automated, efficient cleaning process that requires neither water nor moving parts to keep the solar collectors clean for maximum reflectance and energy output. This project team is working to develop a transparent electrodynamic screen as a self-cleaning technology for solar concentrators; cleaning is achieved without water, moving parts, or manual labor. Because of these features, it has a strong potential for worldwide deployment.

  20. Automated solar collector installation design

    DOE Patents [OSTI]

    Wayne, Gary; Frumkin, Alexander; Zaydman, Michael; Lehman, Scott; Brenner, Jules

    2014-08-26

    Embodiments may include systems and methods to create and edit a representation of a worksite, to create various data objects, to classify such objects as various types of pre-defined "features" with attendant properties and layout constraints. As part of or in addition to classification, an embodiment may include systems and methods to create, associate, and edit intrinsic and extrinsic properties to these objects. A design engine may apply of design rules to the features described above to generate one or more solar collectors installation design alternatives, including generation of on-screen and/or paper representations of the physical layout or arrangement of the one or more design alternatives.

  1. Cogenerating Photovoltaic and Thermal Solar Collector

    E-Print Network [OSTI]

    Su, Xiao

    Cogenerating Photovoltaic and Thermal Solar Collector Jinny Rhee and Jim Mokri COE Faculty peak load and irradiance hours of the day #12;Design · Parabolic solar collector · GaAs PV cells · Solar Energy and Alternative Energy can contribute to the energy supply ­ Renewable, doesn't emit

  2. COMPARISON OF PROPORTIONAL AND ON/OFF SOLAR COLLECTOR LOOP CONTROL STRATEGIES USING A DYNAMIC COLLECTOR MODEL

    E-Print Network [OSTI]

    Schiller, Steven R.

    2013-01-01

    Flat-Plate Solar Heat Collectors" Solar Energy Vol. 3, No.Thermostats For Solar Collector Systems." inter-officeof Flat-Plate Solar Collectors." M.S. Thesis, University of

  3. The Thermal Collector With Varied Glass Covers

    SciTech Connect (OSTI)

    Luminosu, I.; Pop, N.

    2010-08-04

    The thermal collector with varied glass covers represents an innovation realized in order to build a collector able to reach the desired temperature by collecting the solar radiation from the smallest surface, with the highest efficiency. In the case of the thermal collector with variable cover glasses, the number of the glass plates covering the absorber increases together with the length of the circulation pipe for the working fluid. The thermal collector with varied glass covers compared to the conventional collector better meet user requirements because: for the same temperature increase, has the collecting area smaller; for the same collection area, realizes the highest temperature increase and has the highest efficiency. This works is addressed to researchers in the solar energy and to engineers responsible with air-conditioning systems design or industrial and agricultural products drying.

  4. Development of an Advanced, Low-Cost parabolic Trough Collector...

    Office of Environmental Management (EM)

    Development of an Advanced, Low-Cost parabolic Trough Collector for Baseload Operation Development of an Advanced, Low-Cost parabolic Trough Collector for Baseload Operation This...

  5. Low Temperature Combustion Demonstrator for High Efficiency Clean Combustion

    SciTech Connect (OSTI)

    Ojeda, William de

    2010-07-31

    The project which extended from November 2005 to May of 2010 demonstrated the application of Low Temperature Combustion (LTC) with engine out NOx levels of 0.2 g/bhp-hr throughout the program target load of 12.6bar BMEP. The project showed that the range of loads could be extended to 16.5bar BMEP, therefore matching the reference lug line of the base 2007 MY Navistar 6.4L V8 engine. Results showed that the application of LTC provided a dramatic improvement over engine out emissions when compared to the base engine. Furthermore LTC improved thermal efficiency by over 5% from the base production engine when using the steady state 13 mode composite test as a benchmark. The key enablers included improvements in the air, fuel injection, and cooling systems made in Phases I and II. The outcome was the product of a careful integration of each component under an intelligent control system. The engine hardware provided the conditions to support LTC and the controller provided the necessary robustness for a stable combustion. Phase III provided a detailed account on the injection strategy used to meet the high load requirements. During this phase, the control strategy was implemented in a production automotive grade ECU to perform cycle-by-cycle combustion feedback on each of the engine cylinders. The control interacted on a cycle base with the injection system and with the Turbo-EGR systems according to their respective time constants. The result was a unique system that could, first, help optimize the combustion system and maintain high efficiency, and secondly, extend the steady state results to the transient mode of operation. The engine was upgraded in Phase IV with a Variable Valve Actuation system and a hybrid EGR loop. The impact of the more versatile EGR loop did not provide significant advantages, however the application of VVA proved to be an enabler to further extend the operation of LTC and gain considerable benefits in fuel economy and soot reduction. Finally, the transient demonstration was performed in Phase IV. The project demonstrated the achievement of meeting US10 emissions without NOx aftertreatment. The successful execution of the project has served to highlight the effectiveness of closely matched combustion predictive tools to engine testing. It has further served to highlight the importance of key technologies and future areas of research and development. In this regard, recommendations are made towards further improvements in the areas of engine hardware, fuel injection systems, controls and fuels.

  6. Defect studies in low-temperature-grown GaAs

    SciTech Connect (OSTI)

    Bliss, D.E.

    1992-11-01

    High content of excess As is incorporated in GaAs grown by low-temperature molecular-beam-epitaxy (LTMBE). The excess As exists primarily as As antisite defects AsGa and a lesser extent of gallium vacancies V[sub Ga]. The neutral AsGa-related defects were measured by infrared absorption at 1[mu]m. Gallium vacancies, V[sub Ga], was investigated by slow positron annihilation. Dependence of defect contents on doping was studied by Si and Be dopants. No free carriers are generated by n-type or p-type doping up to 10[sup 19] cm[sup [minus]3] Si or Be. Raman data indicate Be occupies Ga substitutional sites but Si atom is not substitutional. Si induces more As[sub Ga] in the layer. As As[sub Ga] increases, photoquenchable As[sub Ga] decreases. Fraction of photoquenchable defects correlates to defects within 3 nearest neighbor separations disrupting the metastability. Annealing reduces neutral As[sub Ga] content around 500C, similar to irradiation damaged and plastically deformed Ga[sub As], as opposed to bulk grown GaAs in which As[sub Ga]-related defects are stable up to 1100C. The lower temperature defect removal is due to V[sub Ga] enhanced diffusion of As[sub Ga] to As precipitates. The supersaturated V[sub GA] and also decreases during annealing. Annealing kinetics for As[sub Ga]-related defects gives 2.0 [plus minus] 0.3 eV and 1.5 [plus minus] 0.3 eV migration enthalpies for the As[sub Ga] and V[sub Ga]. This represents the difference between Ga and As atoms hopping into the vacancy. The non-photoquenchable As[sub Ga]-related defects anneal with an activation energy of 1.1 [plus minus] 0.3eV. Be acceptors can be activated by 800C annealing. Temperature difference between defect annealing and Be activation formation of As[sub Ga]-Be[sub Ga] pairs. Si donors can only be partially activated.

  7. Low Temperature Fuel Cell and Electrolyzer Balance-of-Plant Manufactur...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Fuel Cell and Electrolyzer Balance-of-Plant Manufacturing Needs Low Temperature Fuel Cell and Electrolyzer Balance-of-Plant Manufacturing Needs Presented at the NREL Hydrogen and...

  8. Low-Temperature Hydrocarbon/CO Oxidation Catalysis in Support of HCCI Emission Control

    Broader source: Energy.gov [DOE]

    Development of catalyst materials to facilitate the low-temperature oxidation of hydrocarbons and CO in homogeneous charge compression ignition (HCCI) emissions.

  9. An In-Cylinder Imaging Survey of Low-Temperature, High-Efficiency Combustion Strategies

    Broader source: Energy.gov [DOE]

    High speed imaging of in-cylinder spray and combustion luminosity of low temperature combustion strategies are contrasted to conventional gasoline and diesel engine combustion

  10. THERMODYNAMICS OF LOW-TEMPERATURE (700-850oC) HOT CORROSION

    E-Print Network [OSTI]

    Misra, A.K.

    2013-01-01

    Ref. 2). J. Lumsden, Thermodynamics of molten salt mixtures,R. Defay, Chemical thermodynamics, Longmans Green and Co. ,Electrochemical Society THERMODYNAMICS OF LOW-TEMPERATURE {

  11. Heavy-Duty Low-Temperature and Diesel Combustion & Heavy-Duty...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Heavy-Duty Low-Temperature and Diesel Combustion & Heavy-Duty Combustion Modeling Vehicle Technologies Office Merit Review 2014:...

  12. IRRADIATION GROWTH IN ZIRCONIUM AT LOW TEMPERATURES BY DIRECT ATHERMAL DEPOSITION OF VACANCIES AT EXTENDED SINKS

    E-Print Network [OSTI]

    Motta, Arthur T.

    IRRADIATION GROWTH IN ZIRCONIUM AT LOW TEMPERATURES BY DIRECT ATHERMAL DEPOSITION OF VACANCIES, which can contribute to the observed growth strains. 1. Introduction Irradiation growth of zirconium

  13. Detailed analysis of the energy yield of systems with covered sheet-and-tube PVT collectors

    SciTech Connect (OSTI)

    Santbergen, R.; Rindt, C.C.M.; van Zolingen, R.J.Ch.; Zondag, H.A.

    2010-05-15

    Solar cells have a typical efficiency in the range of 5-20%, implying that 80% or more of the incident solar energy can be harvested in the form of heat and applied for low-temperature heating. In a PVT collector one tries to collect this heat. In this work, the electrical and thermal yield of solar domestic hot water systems with one-cover sheet-and-tube PVT collectors were considered. Objectives of the work were to understand the mechanisms determining these yields, to investigate measures to improve these yields and to investigate the yield consequences if various solar cell technologies are being used. The work was carried out using numerical simulations. A detailed quantitative understanding of all loss mechanisms was obtained, especially of those being inherent to the use of PVT collectors instead of PV modules and conventional thermal collectors. The annual electrical efficiencies of the PVT systems investigated were up to 14% (relative) lower compared to pure PV systems and the annual thermal efficiencies up to 19% (relative) lower compared to pure thermal collector systems. The loss of electrical efficiency is mainly caused by the relatively high fluid temperature. The loss of thermal efficiency is caused both by the high emissivity of the absorber and the withdrawal of electrical energy. However, both the loss of electrical and thermal efficiency can be reduced further by the application of anti-reflective coatings. The thermal efficiency can be improved by the application of a low-emissivity coating on the absorber, however at the cost of a reduced electrical efficiency. (author)

  14. Next Generation Solar Collectors for CSP

    SciTech Connect (OSTI)

    Molnar, Attila; Charles, Ruth

    2014-07-31

    The intent of “Next Generation Solar Collectors for CSP” program was to develop key technology elements for collectors in Phase 1 (Budget Period 1), design these elements in Phase 2 (Budget Period 2) and to deploy and test the final collector in Phase 3 (Budget Period 3). 3M and DOE mutually agreed to terminate the program at the end of Budget Period 1, primarily due to timeline issues. However, significant advancements were achieved in developing a next generation reflective material and panel that has the potential to significantly improve the efficiency of CSP systems.

  15. Nonmonotonic Magnetic Susceptibility of Dipolar Hard-Spheres at Low Temperature and Density

    E-Print Network [OSTI]

    Sciortino, Francesco

    component favoring the head-to-tail arrangement of the particles and the formation, at low T, of linearNonmonotonic Magnetic Susceptibility of Dipolar Hard-Spheres at Low Temperature and Density Sofia, the magnetic response of a dipolar hard sphere fluid at low temperatures and densities, in the region of strong

  16. A Single SQUID Multiplexer for Arrays of Low Temperature Sensors Jongsoo Yoona)

    E-Print Network [OSTI]

    Richards, Paul L.

    1 A Single SQUID Multiplexer for Arrays of Low Temperature Sensors Jongsoo Yoona) , John Clarkea and experimental evaluation of a superconducting quantum interference device (SQUID) mul- tiplexer for an array of low-temperature sensors. Each sensor is inductively coupled to a superconducting summing loop which

  17. The Organic Rankine Cycle System, Its Application to Extract Energy From Low Temperature Waste Heat 

    E-Print Network [OSTI]

    Sawyer, R. H.; Ichikawa, S.

    1980-01-01

    The conservation of energy by its recovery from low temperature waste heat is of increasing importance in today's world energy crisis. The Organic Rankine Cycle is a cost efficient and proven method of converting low temperature (200-400o F) waste...

  18. Low Temperature Molding for High Space Coverage Microlens Arrays Kerwin Wang, Karl F. Bhringer

    E-Print Network [OSTI]

    important to achieve metrology-grade molding and lens reproduction without shrinkage. A comparisonLow Temperature Molding for High Space Coverage Microlens Arrays Kerwin Wang, Karl F. Böhringer presents SF6/O2 plasma lens-mold- etching and low-temperature-molding to produce 100% coverage microlens

  19. LOW TEMPERATURE PHYSICS The effect of neutron and gamma radiation on

    E-Print Network [OSTI]

    McDonald, Kirk

    LOW TEMPERATURE PHYSICS The effect of neutron and gamma radiation on magnet components Michael University of Technology Atominstitut, Vienna, Austria RESMM Workshop, Fermilab, 14 February 2012 #12;LOW. Hengstberger, R. Prokopec, M. Zehetmayer PhD students: T. Baumgartner, M. Chudy, J. Emhofer #12;LOW TEMPERATURE

  20. LOW NOISE SILICON JFETs WORKING AT LOW TEMPERATURES FOR BOLOMETRIC DETECTOR READOUT

    E-Print Network [OSTI]

    #12;1 LOW NOISE SILICON JFETs WORKING AT LOW TEMPERATURES FOR BOLOMETRIC DETECTOR READOUT A of merit Hf (=1/f noise coefficient × JFET input capacitance) as low as 2.4×10-29 J at 110 K. 1 crystal kept at very low temperature (50 mK) generates an increase of temperature in the crystal

  1. Catalytic CVD generation of high-purity single-walled carbon nanotubes at low temperature

    E-Print Network [OSTI]

    Maruyama, Shigeo

    CVD Catalytic CVD generation of high-purity single-walled carbon nanotubes at low temperature-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656 We have demonstrated the high-quality and low-temperature generation on the generation temperature and gas flow rate. In order to create nanotube devices, we tried to generate SWNTs

  2. 9 Ultra Low Temperature ADI 2 9.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

    E-Print Network [OSTI]

    Cambridge, University of

    Contents 9 Ultra Low Temperature ADI 2 9.1 Introduction;Chapter 9 Ultra Low Temperature ADI 9.1 Introduction It has been indicated that a family of austempered]. These steels contain high carbon silicon and manganese, and they are isothermally heat treated at very low

  3. Heat capacity of adsorbed Helium-3 at ultra-low temperatures

    E-Print Network [OSTI]

    Boyer, Edmond

    Heat capacity of adsorbed Helium-3 at ultra-low temperatures J. Elbs, C. Winkelmann, Yu. M. Bunkov of monolayers of 3He adsorbed on the surface of a cell filled with superfluid 3He. We found that at ultra low in the limit of ultra low temperatures. 1. INTRODUCTION A closed cell with a small orifice, immersed

  4. Pure hydrogen low-temperature plasma exposure of HOPG and graphene: Graphane formation?

    E-Print Network [OSTI]

    Zumbühl, Dominik

    852 Pure hydrogen low-temperature plasma exposure of HOPG and graphene: Graphane formation? Baran Keywords: graphane; HOPG; hydrogenation; plasma Beilstein J. Nanotechnol. 2012, 3, 852­859. doi:10 exposed to a pure hydrogen low-temperature plasma (LTP). Characterizations include various experimental

  5. Low temperature and high frequency effects on polymer-stabilized blue phase liquid crystals with

    E-Print Network [OSTI]

    Wu, Shin-Tson

    Low temperature and high frequency effects on polymer-stabilized blue phase liquid crystals*a and Yasuhiro Hasebab We report the low temperature and high frequency effects on polymer-stabilized blue phase temperature and high frequency operations are critical issues, especially for outdoor applications or color

  6. Ferromagnetic resonance and low-temperature magnetic tests for biogenic magnetite

    E-Print Network [OSTI]

    Weiss, Benjamin P.

    Ferromagnetic resonance and low-temperature magnetic tests for biogenic magnetite $ Benjamin P, Massachusetts Institute of Technology, Cambridge, MA 02139, USA c Jet Propulsion Laboratory, California two rock magnetic analyses--the low-temperature Moskowitz test and ferromagnetic resonance (FMR

  7. Low-temperature magnetic properties of pelagic carbonates: Oxidation of biogenic magnetite and identification

    E-Print Network [OSTI]

    Utrecht, Universiteit

    -temperature magnetic measurements on biogenic magnetite-bearing sediments from the Southern Ocean (Ocean DrillingLow-temperature magnetic properties of pelagic carbonates: Oxidation of biogenic magnetite cells. We document a range of low-temperature magnetic properties, including reversible humped low

  8. Low-Temperature in Situ Large Strain Plasticity of Ceramic SiC Nanowires and

    E-Print Network [OSTI]

    Wang, Zhong L.

    Low-Temperature in Situ Large Strain Plasticity of Ceramic SiC Nanowires and Its Atomic for metals and alloys but is rarely observed for ceramic materials especially at low temperature (300 K). With the reduction in dimensionality, however, unusual mechanical properties are shown by ceramic nanomaterials

  9. A solar concentrating photovoltaic / thermal collector J.S. Coventry

    E-Print Network [OSTI]

    solar concentrating photovoltaic / thermal collector Coventry "Photovoltaic and Wind Power for Urban in this area are summarised. The Combined Heat and Power Solar (CHAPS) collector, under development collector. Some of the technical challenges in the design of the CHAPS collector are discussed

  10. Collector/Receiver Characterization (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2010-08-01

    Fact sheet describing NREL CSP Program capabilities for collector/receiver characterization: determining optical efficiency, measuring heat loss, developing and testing concentrators, concentrating the sun's power, and optically characterizing CSP plants.

  11. Tilt assembly for tracking solar collector assembly

    DOE Patents [OSTI]

    Almy, Charles; Peurach, John; Sandler, Reuben

    2012-01-24

    A tilt assembly is used with a solar collector assembly of the type comprising a frame, supporting a solar collector, for movement about a tilt axis by pivoting a drive element between first and second orientations. The tilt assembly comprises a drive element coupler connected to the drive element and a driver, the driver comprising a drive frame, a drive arm and a drive arm driver. The drive arm is mounted to the drive frame for pivotal movement about a drive arm axis. Movement on the drive arm mimics movement of the drive element. Drive element couplers can extend in opposite directions from the outer portion of the drive arm, whereby the assembly can be used between adjacent solar collector assemblies in a row of solar collector assemblies.

  12. Next-Generation Solar Collectors for CSP

    Office of Energy Efficiency and Renewable Energy (EERE)

    This fact sheet on Next-Generation Collectors for CSP highlights a solar energy program awarded through the 2012 SunShot Concentrating Solar Power R&D awards. The team is developing new solar collector base technologies for next-generation heliostats used in power tower systems. If successful, this project will result in a 50% reduction in solar field equipment cost and a 30% reduction in field installation cost compared to existing heliostat designs.

  13. Integrated solar thermal energy collector system

    SciTech Connect (OSTI)

    Garrison, J.D.

    1987-08-18

    A solar thermal collector system is described one of a class of devices which converts solar radiation into heat and transmits this heat to storage from whence it is utilized, comprising: an evacuated glass solar collector, the evacuated glass solar collector having a glass vacuum envelope, the upper portion of the glass vacuum envelope also serving as window to pass solar radiation, the evacuated glass solar collector having a multiplicity of substantially parallel linear adjacent concentrating troughs, each trough shaped and mirror surfaced so as concentrate solar radiation in the vacuum, the mirror surface inside the vacuum and the concentration approximately ideal, the multiplicity of substantially parallel linear adjacent troughs extending substantially over the entire length and width of the evacuated glass solar collector; a heat storage system, the heat storage system adjacent to the evacuated glass solar collector, the heat storage system having a heat storage tank which is thermally insulated, the heat storage tank containing a heat storage medium, and the heat storage system including means of removal of heat from the heat storage tank for utilization.

  14. Envelope calculations for a low temperature neutron star 

    E-Print Network [OSTI]

    McCoy, Robert Paul

    1976-01-01

    are known locations of previous super- novae, suggests that a supernova is the mechanism by which neutron stars are formed. Ten years ago there was considerable interest in trying to identify neutron stars by looking for the very hot, very dense remnant... expected from a supernova explosion. Since the time of the pulsar discoveries, attention has been shifted from this line of search but no direct observation of a neutron star has yet been made. Whether it is possible to detect the surface emissions of a...

  15. Double shell slurry low-temperature corrosion tests

    SciTech Connect (OSTI)

    Divine, J.R.; Bowen, W.M.; McPartland, S.A.; Elmore, R.P.; Engel, D.W.

    1983-09-01

    A series of year-long tests have been completed on potential double shell slurry (DSS) compositions at temperatures up to 100/sup 0/C. These tests have sought data on uniform corrosion, pitting, and stress-corrosion cracking. No indication of the latter two types of corrosion were observed within the test matrix. Corrosion rates after four months were generally below the 1 mpy (25 ..mu..m/y) design limit. By the end of twelve months all results were below this limit and, except for very concentrated mixtures, all were below 0.5 mpy. Prediction equations were generated from a model fitted to the data. The equations provide a rapid means of estimating the corrosion rate for proposed DSS compositions.

  16. METAL FOILS FOR DIRECT APPLICATION OF ABSORBER COATINGS ON SOLAR COLLECTORS

    E-Print Network [OSTI]

    Lampert, Carl M.

    2011-01-01

    Sputtering for Depositing Solar Collector Coatings".of the AES Coatings for Solar Collectors Symposium. Atlanta.Neutral Surfaces in Solar Collectors." Proceedings of ISES

  17. METAL FOILS FOR DIRECT APPLICATION OF ABSORBER COATINGS ON SOLAR COLLECTORS

    E-Print Network [OSTI]

    Lampert, Carl M.

    2011-01-01

    for Depositing Solar Collector Coatings". Proceedings of theSymposium on Coatings for Solar Collectors, . Louis,'MO,OF ABSORBER COATINGS ON SOLAR COLLECTORS Carl M. Lampert

  18. METAL FOILS FOR DIRECT APPLICATION OF ABSORBER COATINGS ON SOLAR COLLECTORS

    E-Print Network [OSTI]

    Lampert, Carl M.

    2011-01-01

    of the AES Coatings for Solar Collectors Symposium. Atlanta.Sputtering for Depositing Solar Collector Coatings".Symposium on Coatings for Solar Collectors, . Louis,'MO,

  19. Efficient solar cooling: first ever non-tracking solar collectors powering a double effect absorption chiller

    E-Print Network [OSTI]

    Poiry, Heather Marie

    2011-01-01

    cost effective solar thermal collector capable of producinghow to design a solar thermal collector that could achievedesign and model solar thermal collectors. In 2007 our group

  20. MINICHANNEL-TUBE SOLAR THERMAL COLLECTORS FOR LOW TO MEDIUM TEMPERATURE APPLICATIONS

    E-Print Network [OSTI]

    Duong, Van Thuc

    2015-01-01

    of conventional solar thermal collectors in California andof conventional solar thermal collectors in California andminichannel-tube solar thermal collectors for low to medium

  1. METAL FOILS FOR DIRECT APPLICATION OF ABSORBER COATINGS ON SOLAR COLLECTORS

    E-Print Network [OSTI]

    Lampert, Carl M.

    2011-01-01

    Sputtering for Depositing Solar Collector Coatings".of the AES Coatings for Solar Collectors Symposium. Atlanta.Surfaces on Flat Plate Solar Collectors". Proceedings of 2nd

  2. METAL FOILS FOR DIRECT APPLICATION OF ABSORBER COATINGS ON SOLAR COLLECTORS

    E-Print Network [OSTI]

    Lampert, Carl M.

    2011-01-01

    Surfaces on Flat Plate Solar Collectors". Proceedings of 2ndSputtering for Depositing Solar Collector Coatings i i •of the AES Coatings for Solar Collectors Symposium. Atlanta.

  3. Efficient solar cooling: first ever non-tracking solar collectors powering a double effect absorption chiller

    E-Print Network [OSTI]

    Poiry, Heather Marie

    2011-01-01

    A. and Winston, R. (1980) “Solar collectors for low and49: Delta T of the solar collectors during an efficiencyHigh-temperature, Solar Collectors for Mass Production.

  4. Low-Temperature Geothermal Water in Utah: A compilation of Data...

    Open Energy Info (EERE)

    Low-Temperature Geothermal Water in Utah: A compilation of Data for Thermal Wells and Springs Through 1993 Jump to: navigation, search OpenEI Reference LibraryAdd to library Web...

  5. Low Temperature Autoignition of C8H16O2 Ethyl and Methyl Esters...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Temperature Autoignition of C8H16O2 Ethyl and Methyl Esters in a Motored Engine Low Temperature Autoignition of C8H16O2 Ethyl and Methyl Esters in a Motored Engine qThe alkyl chain...

  6. Design and Experiments of a Solar Low-temperature Hot Water Floor Radiant Heating System 

    E-Print Network [OSTI]

    Wu, Z.; Li, D.

    2006-01-01

    The solar low-temperature hot water floor radiant heating system combines solar energy heating with floor radiant heating. This kind of environmental heating way not only saves fossil resources and reduces pollution, but ...

  7. Instrumentation development for magneto-transport and neutron scattering measurements at high pressure and low temperature 

    E-Print Network [OSTI]

    Wang, Weiwei

    2013-07-01

    High pressure, high magnetic field and low temperature techniques are required to investigate magnetic transitions and quantum critical behaviour in different ferromagnetic materials to elucidate how novel forms of ...

  8. Two-Day Geothermal Symposium to Highlight Low-Temperature Power...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    north of Casper, Wyoming. The tour will include a look at the low-temperature Organic Rankine Cycle technology test at NPR-3 and provide an afternoon geologic field tour of nearby...

  9. Electrocatalytic activities of supported Pt nanoparticles for low-temperature fuel cell applications

    E-Print Network [OSTI]

    Sheng, Wenchao, Ph. D. Massachusetts Institute of Technology

    2010-01-01

    Low-temperature fuel cells (FCs) are highly efficient and environmentally friendly energy conversion devices that have been in the spotlight of many energy research efforts in the past few decades. However, FC commercialization ...

  10. Low temperature processing of baroplastic core-shell nanoparticles and block copolymers

    E-Print Network [OSTI]

    González-León, Juan A. (Juan Antonio)

    2006-01-01

    Baroplastics are nanophase polymeric materials comprised of two components that can miscibilize under pressure thereby facilitating flow. The possibility of processing these materials at low temperatures was the main focus ...

  11. The effect of aging techniques on asphalt low-temperature properties 

    E-Print Network [OSTI]

    Knorr, Daniel Brainard

    2001-01-01

    This study includes three phases wherein the effects of various aging techniques on asphalt low-temperature properties were investigated. In addition, two other studies were conducted: air-blowing was investigated as a possible long-term aging test...

  12. Fuel Effects on Low Temperature Combustion in a Light-Duty Diesel Engine

    Broader source: Energy.gov [DOE]

    Six different fuels were investigated to study the influence of fuel properties on engine out emissions and performance of low temperature premixed compression ignition combustion light-duty HSDI engines

  13. Supported Au-CuO Catalysts for Low Temperature CO Oxidation

    Broader source: Energy.gov [DOE]

    Catalytic properties of Au-CuOx/SiO2 are investigated in removing pollutants from simulated automotive exhaust to meet an increasing demand for high emissions control at low temperatures.

  14. Optical-Engine Study of a Low-Temperature Combustion Strategy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Study of a Low-Temperature Combustion Strategy Employing a Dual-Row, Narrow-Included-Angle Nozzle and Early, Direct Injection of Diesel Fuel Optical-Engine Study of a...

  15. Advanced Low Temperature Geothermal Power Cycles (The ENTIV Organic Project) Final Report

    SciTech Connect (OSTI)

    Mugerwa, Michael

    2015-11-18

    Feasibility study of advanced low temperature thermal power cycles for the Entiv Organic Project. Study evaluates amonia-water mixed working fluid energy conversion processes developed and licensed under Kalex in comparison with Kalina cycles. Both cycles are developed using low temperature thermal resource from the Lower Klamath Lake Geothermal Area. An economic feasibility evaluation was conducted for a pilot plant which was deemed unfeasible by the Project Sponsor (Entiv).

  16. Low temperature transport in p-doped InAs nanowires

    SciTech Connect (OSTI)

    Upadhyay, S.; Jespersen, T. S.; Madsen, M. H.; Krogstrup, P.; Nygård, J. [Center for Quantum Devices and Nano-Science Center, Niels Bohr Institute, University of Copenhagen, Universitetsparken 5, DK-2100 Copenhagen (Denmark)] [Center for Quantum Devices and Nano-Science Center, Niels Bohr Institute, University of Copenhagen, Universitetsparken 5, DK-2100 Copenhagen (Denmark)

    2013-10-14

    We present low temperature electrical measurements of p-type Indium Arsenide nanowires grown via molecular beam epitaxy using Beryllium as a dopant. Growth of p-type wires without stacking faults is demonstrated. Devices in field-effect geometries exhibit ambipolar behavior, and the temperature dependence of electron and hole field effect mobilities are extracted. At low temperatures, we observe reproducible conductance fluctuations as a result of quantum interference, and magnetoconductance data show weak antilocalization.

  17. Integrated main rail, feed rail, and current collector

    DOE Patents [OSTI]

    Petri, R.J.; Meek, J.; Bachta, R.P.; Marianowski, L.G.

    1994-11-08

    A separator plate is described for a fuel cell comprising an anode current collector, a cathode current collector and a main plate, the main plate disposed between the anode current collector and the cathode current collector. The anode current collector forms a flattened peripheral wet seal structure and manifold wet seal structure on the anode side of the separator plate and the cathode current collector forms a flattened peripheral wet seal structure and manifold wet seal structure on the cathode side of the separator plate. In this manner, the number of components required to manufacture and assemble a fuel cell stack is reduced. 9 figs.

  18. Investigation of the Difference in Cool Flame Characteristics between Petroleum Diesel and Soybean Biodiesel Operating in Low Temperature Combustion Mode 

    E-Print Network [OSTI]

    Muthu Narayanan, Aditya

    2014-01-16

    One of the promising solutions to rising emission standards is the in-cylinder emission reduction, through low temperature combustion. Low temperature combustion defeats conventional soot-NOx trade off by simultaneous reduction of both emissions...

  19. Active and Passive Elec. Comp., September 2003, Vol. 26, pp. 151166 ULTRA-LOW TEMPERATURE COEFFICIENT OF

    E-Print Network [OSTI]

    Azad, Abdul-Majeed

    Active and Passive Elec. Comp., September 2003, Vol. 26, pp. 151­166 ULTRA-LOW TEMPERATURE that this material system possessed low dielectric constant and ultra-low temperature coefficient of capacitance (TCC

  20. Stress in shaped glass evacuated collectors

    SciTech Connect (OSTI)

    Garrison, J.D.; Fischer-Cripps, A.

    1997-02-01

    Shaped glass evacuated collectors have the lower vacuum envelope formed with a CPC shape. The internal surface is silvered. This surface concentrates solar radiation onto an internal absorbing tube. The upper part of the vacuum envelope is a window to pass the solar radiation in to the absorbing tube. A computer program using analytical equations is used to design these collectors while keeping the glass tensile stress arising from evacuation below acceptable limits. A finite element computer program is used to test the accuracy of the stress calculated analytically. The calculations agree within about 1 MPa. Wind and thermal stresses in the glass are lower than the stresses caused by evacuation.

  1. A SOLAR TEST COLLECTOR FOR EVALUATION OF BOTH SELECTIVE AND NON-SELECTIVE ABSORBERS

    E-Print Network [OSTI]

    Lampert, Carl M.

    2011-01-01

    Coating Applied to Collector Design, Proceedings North American Solarsolar test collector was designed for the testing of thermally absorbing coatingssolar test collector was designed so that certain collector parameters could be held constant or controlled and yet different coatings

  2. A SOLAR TEST COLLECTOR FOR EVALUATION OF BOTH SELECTIVE AND NON-SELECTIVE ABSORBERS

    E-Print Network [OSTI]

    Lampert, Carl M.

    2011-01-01

    for Testing Solar Collectors and Thermal Storage Devices,SOLAR TEST COLLECTOR When analyzing a collector's performance and thermalThermal Capacitance Upon the Performance of Flat-Rate Solar Collectors"

  3. Low-temperature magnetic properties of greigite (Fe3S4) Liao Chang and Andrew P. Roberts

    E-Print Network [OSTI]

    Utrecht, Universiteit

    Low-temperature magnetic properties of greigite (Fe3S4) Liao Chang and Andrew P. Roberts National 115, Taiwan [1] We provide comprehensive low-temperature magnetic results for greigite (Fe3S4) across no low- temperature magnetic transitions, but we also document that it has strong domain-state dependence

  4. Connectable solar air collectors Solar Energy Centre Denmark

    E-Print Network [OSTI]

    Connectable solar air collectors Solar Energy Centre Denmark Danish Technological Institute SEC-R-22 #12;Connectable solar air collectors Søren Østergaard Jensen Miroslav Bosanac Solar Energy Centre Søren Østergaard Jensen and Miroslav Bosanac Solar Energy Centre, Danish Technological Institute

  5. Numerical Simulation Study on Transpired Solar Air Collector 

    E-Print Network [OSTI]

    Wang, C.; Guan, Z.; Zhao, X.; Wang, D.

    2006-01-01

    The unglazed transpired solar air collector is now a well-recognized solar air heater for heating outside air directly. In this article, researchers introduced numerical simulation tools into the solar air collector research area, analyzed...

  6. Comparative efficiencies of solar energy collectors Laboratoire de Technologie Optique

    E-Print Network [OSTI]

    Boyer, Edmond

    57 Comparative efficiencies of solar energy collectors M. Duban Laboratoire de Technologie Optique to make a compari- son between the different kinds of solar collectors : for instance, a paraboloid of the geometric efficiencies of basic collectors, by examining the cons- tancy with which each of them collects

  7. Department of Electrical Engineering Spring 2011 Glass Block Solar Collector

    E-Print Network [OSTI]

    Demirel, Melik C.

    PENNSTATE Department of Electrical Engineering Spring 2011 Glass Block Solar Collector Overview of the team to incorporate solar collectors into glass blocks and provide an application for the collected energy. Objectives The team's objective was to deliver a working glass block solar collector

  8. Adaptive Receding Horizon Control of a Distributed Collector Solar Field

    E-Print Network [OSTI]

    Sontag, Eduardo

    Adaptive Receding Horizon Control of a Distributed Collector Solar Field J.M. Igreja, J. M. Lemos for a distributed collector solar field which ex- plicitly explores its distributed parameter character. The plant considered is a distributed collector solar field, being described by a nonlinear hyperbolic partial

  9. Solar collector apparatus having increased energy rejection during stagnation

    DOE Patents [OSTI]

    Moore, S.W.

    1981-01-16

    An active solar collector having increased energy rejection during stagnation is disclosed. The collector's glazing is brought into substantial contact with absorber during stagnation to increase re-emittance and thereby to maintan lower temperatures when the collector is not in operation.

  10. Project Profile: Self-Cleaning CSP Collectors

    Broader source: Energy.gov [DOE]

    Boston University and its partners, under the 2012 SunShot Concentrating Solar Power (CSP) R&D FOA, are working to develop a new method to keep solar collectors dirt- and dust-free and thereby maintain high optical efficiency.

  11. Annual collectible energy of a two-axis tracking flat-plate solar collector

    SciTech Connect (OSTI)

    Attalage, R.A.; Reddy, T.A. )

    1992-01-01

    A correlation for annual collectible energy of a two-axis tracking flat-plate solar collector has been developed using simulated results based on typical meteorological year (TMY) data for 26 US locations. A preliminary validation of this correlation has been carried out with data from four Australian locations. With the advent of increasing interest in photovoltaic systems, there are a number of advantages of using a two-axis flat-plate collector. Since the tracking system is generally much cheaper than the collector panel, such a mode permits the incident solar radiation to be collected more efficiently. Incidence angle effects are minimized and, moreover, contrary to concentrating collectors, such a mode enables both the diffuse and beam components of solar radiation to be collected. In tropical locations where the diffuse fraction is generally high, this may be a great advantage. The objective of this study was to develop a correlation for the annual collectible energy of a two-axis tracking flat-plate collector.

  12. The low temperature differential Stirling engine with working fluid operated on critical condition

    SciTech Connect (OSTI)

    Naso, V.; Dong, W.; Lucentini, M.; Capata, R.

    1998-07-01

    The research and development of low temperature differential Stirling engine has a great potential market since a lot of thermal energy at low temperature can supply it and the cost of this kind of engine is lower than general Stirling engine. The characteristics of low compression ratio and low differential temperature Stirling engine may be satisfied with working fluid compressed on critical conditions. By combining two phase heat transfer with forced convective flow in compression space and through the regenerator in the engine, a new heat transfer coefficient emerges capable of absorbing and releasing high heat fluxes without the corresponding low temperature increase. The current analysis focuses on the study of Stirling engines with working fluid compressed on critical conditions, thus at two-phase heat transfer in compression space and regenerator of the engine under forced convective flow conditions.

  13. Low-temperature catalytic gasification of wet industrial wastes. FY 1991--1992 interim report

    SciTech Connect (OSTI)

    Elliott, D.C.; Neuenschwander, G.G.; Hart, T.R.; Phelps, M.R.; Sealock, L.J. Jr.

    1993-07-01

    A catalytic gasification system operating in a pressurized water environment has been developed and refined at Pacific Northwest Laboratory (PNL) for over 12 years. Initial experiments were aimed at developing kinetics information for steam gasification of biomass in the presence of catalysts. The combined use of alkali and metal catalysts was reported for gasification of biomass and its components at low temperatures (350{degrees}C to 450{degrees}C). From the fundamental research evolved the concept of a pressurized, catalytic gasification system for converting wet biomass feedstocks to fuel gas. Extensive batch reactor testing and limited continuous reactor system (CRS) testing were undertaken in the development of this system under sponsorship of the US Department of Energy. A wide range of biomass feedstocks were tested, and the importance of the nickel metal catalyst was identified. Specific use of this process for treating food processing wastes was also studied. The concept application was further expanded to encompass cleanup of hazardous wastewater streams, and results were reported for batch reactor tests and continuous reactor tests. Ongoing work at PNL focuses on refining the catalyst and scaling the system to long-term industrial needs. The process is licensed as the Thermochemical Environmental Energy System (TEES{reg_sign}) to Onsite*Ofsite, Inc., of Duarte, California. This report is a follow-on to the 1989--90 interim report [Elliott et al. 1991], which reviewed the results of the studies conducted with a fixed-bed, continuous-feed, tubular reactor. The discussion here provides an overview of experiments on the wide range of potential feedstock materials conducted in a batch reactor; development of new catalyst materials; and tests performed in continuous-flow reactors at three scales. The appendices contain the history and background of the process development, as well as more detailed descriptions and results of the recent studies.

  14. Low-Temperature Scintillation Properties of CaWO4 Crystals for Rare-Event Searches

    E-Print Network [OSTI]

    Sivers, M v; Di Stefano, P C F; Erb, A; Gütlein, A; Lanfranchi, J -C; Münster, A; Nadeau, P; Piquemal, M; Potzel, W; Roth, S; Schreiner, K; Strauss, R; Wawoczny, S; Willers, M; Zöller, A

    2015-01-01

    In prospect of its application in cryogenic rare-event searches, we have investigated the low-temperature scintillation properties of CaWO4 crystals down to 3.4 K under {\\alpha} and {\\gamma} excitation. Concerning the scintillation decay times, we observe a long component in the ms range which significantly contributes to the light yield below 40K. For the first time we have measured the temperature dependence of the {\\alpha}/{\\gamma}- ratio of the light yield. This parameter which can be used to discriminate {\\alpha} and {\\gamma} events in scintillating bolometers is found to be about 8-15% smaller at low temperatures compared to room temperature.

  15. Method for the rapid synthesis of large quantities of metal oxide nanowires at low temperatures

    DOE Patents [OSTI]

    Sunkara, Mahendra Kumar (Louisville, KY); Vaddiraju, Sreeram (Mountain View, CA); Mozetic, Miran (Ljubljan, SI); Cvelbar, Uros (Idrija, SI)

    2009-09-22

    A process for the rapid synthesis of metal oxide nanoparticles at low temperatures and methods which facilitate the fabrication of long metal oxide nanowires. The method is based on treatment of metals with oxygen plasma. Using oxygen plasma at low temperatures allows for rapid growth unlike other synthesis methods where nanomaterials take a long time to grow. Density of neutral oxygen atoms in plasma is a controlling factor for the yield of nanowires. The oxygen atom density window differs for different materials. By selecting the optimal oxygen atom density for various materials the yield can be maximized for nanowire synthesis of the metal.

  16. A robust and well shielded thermal conductivity device for low temperature measurements

    SciTech Connect (OSTI)

    Toews, W. H.; Hill, R. W.

    2014-04-15

    We present a compact mechanically robust thermal conductivity measurement apparatus for measurements at low temperatures (<1 K) and high magnetic fields on small high-purity single crystal samples. A high-conductivity copper box is used to enclose the sample and all the components. The box provides protection for the thermometers, heater, and most importantly the sample increasing the portability of the mount. In addition to physical protection, the copper box is also effective at shielding radio frequency electromagnetic interference and thermal radiation, which is essential for low temperature measurements. A printed circuit board in conjunction with a braided ribbon cable is used to organize the delicate wiring and provide mechanical robustness.

  17. YEAR

    National Nuclear Security Administration (NNSA)

    4 YEAR 2012 Males 65 Females 29 YEAR 2012 SES 3 EJEK 5 EN 04 3 NN (Engineering) 21 NQ (ProfTechAdmin) 61 NU (TechAdmin Support) 1 YEAR 2012 American Indian Male 0 American...

  18. YEAR

    National Nuclear Security Administration (NNSA)

    4 YEAR 2011 Males 21 Females 23 YEAR 2011 SES 3 EJEK 1 EN 03 1 NN (Engineering) 3 NQ (ProfTechAdmin) 31 NU (TechAdmin Support) 5 YEAR 2011 American Indian Male 0 American...

  19. YEAR

    National Nuclear Security Administration (NNSA)

    92 YEAR 2012 Males 52 Females 40 YEAR 2012 SES 1 EJEK 7 EN 04 13 EN 03 1 NN (Engineering) 27 NQ (ProfTechAdmin) 38 NU (TechAdmin Support) 5 YEAR 2012 American Indian Male 0...

  20. YEAR

    National Nuclear Security Administration (NNSA)

    558 YEAR 2013 Males 512 Females 46 YEAR 2013 SES 2 EJEK 2 EN 04 1 NN (Engineering) 11 NQ (ProfTechAdmin) 220 NU (TechAdmin Support) 1 NV (Nuc Mat Courier) 321 YEAR 2013...

  1. YEAR

    National Nuclear Security Administration (NNSA)

    11 YEAR 2012 Males 78 Females 33 YEAR 2012 SES 2 EJEK 9 EN 05 1 EN 04 33 NN (Engineering) 32 NQ (ProfTechAdmin) 31 NU (TechAdmin Support) 3 YEAR 2012 American Indian Male 2...

  2. YEAR

    National Nuclear Security Administration (NNSA)

    300 YEAR 2011 Males 109 Females 191 YEAR 2011 SES 9 EJEK 1 NN (Engineering) 2 NQ (ProfTechAdmin) 203 NU (TechAdmin Support) 38 NF (Future Ldrs) 47 YEAR 2011 American Indian...

  3. YEAR

    National Nuclear Security Administration (NNSA)

    02 YEAR 2011 Males 48 Females 54 YEAR 2011 SES 5 EJEK 1 NN (Engineering) 13 NQ (ProfTechAdmin) 80 NU (TechAdmin Support) 3 YEAR 2011 American Indian Male 0 American Indian...

  4. YEAR

    National Nuclear Security Administration (NNSA)

    8 YEAR 2013 Males 27 Females 11 YEAR 2013 SES 1 EN 05 1 EN 04 11 NN (Engineering) 8 NQ (ProfTechAdmin) 15 NU (TechAdmin Support) 2 YEAR 2013 American Indian Alaska Native Male...

  5. YEAR

    National Nuclear Security Administration (NNSA)

    31 YEAR 2013 Males 20 Females 11 YEAR 2013 SES 2 EN 04 4 NN (Engineering) 12 NQ (ProfTechAdmin) 12 NU (TechAdmin Support) 1 YEAR 2013 American Indian Alaska Native Male (AIAN,...

  6. YEAR

    National Nuclear Security Administration (NNSA)

    16 YEAR 2012 Males 84 Females 32 YEAR 2012 SES 26 EJEK 2 EN 05 9 NN (Engineering) 39 NQ (ProfTechAdmin) 30 NU (TechAdmin Support) 10 YEAR 2012 American Indian Male 0 American...

  7. YEAR

    National Nuclear Security Administration (NNSA)

    34 YEAR 2012 Males 66 Females 68 YEAR 2012 SES 6 NN (Engineering) 15 NQ (ProfTechAdmin) 110 NU (TechAdmin Support) 3 YEAR 2012 American Indian Male 1 American Indian Female 2...

  8. YEAR

    National Nuclear Security Administration (NNSA)

    86 YEAR 2012 Males 103 Females 183 YEAR 2012 SES 7 EJEK 1 NN (Engineering) 1 NQ (ProfTechAdmin) 202 NU (TechAdmin Support) 30 NF (Future Ldrs) 45 YEAR 2012 American Indian Male...

  9. YEAR

    National Nuclear Security Administration (NNSA)

    80 YEAR 2012 Males 51 Females 29 YEAR 2012 SES 1 EJEK 22 EN 04 21 NN (Engineering) 14 NQ (ProfTechAdmin) 21 NU (TechAdmin Support) 1 YEAR 2012 American Indian Male 0 American...

  10. YEAR

    National Nuclear Security Administration (NNSA)

    1 YEAR 2012 Males 30 Females 11 YEAR 2012 SES 1 EN 05 1 EN 04 11 NN (Engineering) 9 NQ (ProfTechAdmin) 17 NU (TechAdmin Support) 2 YEAR 2012 American Indian Male 0 American...

  11. YEAR

    National Nuclear Security Administration (NNSA)

    96 YEAR 2013 Males 69 Females 27 YEAR 2013 SES 1 EJEK 9 EN 04 27 NN (Engineering) 26 NQ (ProfTechAdmin) 30 NU (TechAdmin Support) 3 YEAR 2013 American Indian Alaska Native Male...

  12. YEAR

    National Nuclear Security Administration (NNSA)

    31 YEAR 2012 Males 19 Females 12 YEAR 2012 SES 2 EN 04 4 NN (Engineering) 12 NQ (ProfTechAdmin) 12 NU (TechAdmin Support) 1 YEAR 2012 American Indian Male 0 American Indian...

  13. YEAR

    National Nuclear Security Administration (NNSA)

    0 YEAR 2013 Males 48 Females 32 YEAR 2013 SES 2 EJEK 7 EN 04 11 EN 03 1 NN (Engineering) 23 NQ (ProfTechAdmin) 33 NU (TechAdmin Support) 3 YEAR 2013 American Indian Alaska...

  14. YEAR

    National Nuclear Security Administration (NNSA)

    40 YEAR 2011 Males 68 Females 72 YEAR 2011 SES 5 EJEK 1 NN (Engineering) 16 NQ (ProfTechAdmin) 115 NU (TechAdmin Support) 3 YEAR 2011 American Indian Male 1 American Indian...

  15. YEAR

    National Nuclear Security Administration (NNSA)

    00 YEAR 2012 Males 48 Females 52 YEAR 2012 SES 5 EJEK 1 NN (Engineering) 11 NQ (ProfTechAdmin) 80 NU (TechAdmin Support) 3 YEAR 2012 American Indian Male 0 American Indian...

  16. YEAR

    National Nuclear Security Administration (NNSA)

    137 YEAR 2013 Males 90 Females 47 YEAR 2013 SES 2 SL 1 EJEK 30 EN 04 30 EN 03 2 NN (Engineering) 23 NQ (ProfTechAdmin) 45 NU (TechAdmin Support) 4 YEAR 2013 American Indian...

  17. YEAR

    National Nuclear Security Administration (NNSA)

    of Employees 14 GENDER YEAR 2012 Males 9 Females 5 YEAR 2012 SES 2 EJEK 2 NN (Engineering) 4 NQ (ProfTechAdmin) 6 YEAR 2012 American Indian Male 0 American Indian Female 0...

  18. YEAR

    National Nuclear Security Administration (NNSA)

    3 YEAR 2012 Males 21 Females 22 YEAR 2012 SES 3 EJEK 1 EN 03 1 NN (Engineering) 3 NQ (ProfTechAdmin) 30 NU (TechAdmin Support) 5 YEAR 2012 American Indian Male 0 American...

  19. YEAR

    National Nuclear Security Administration (NNSA)

    YEAR 2014 Males 48 Females 33 PAY PLAN YEAR 2014 SES 1 EJEK 8 EN 04 10 EN 03 1 NN (Engineering) 27 NQ (ProfTechAdmin) 29 NU (TechAdmin Support) 5 YEAR 2014 American Indian...

  20. YEAR

    National Nuclear Security Administration (NNSA)

    8 YEAR 2014 Males 18 Females 10 PAY PLAN YEAR 2014 SES 1 EN 05 1 EN 04 4 NN (Engineering) 12 NQ (ProfTechAdmin) 9 NU (TechAdmin Support) 1 YEAR 2014 American Indian Alaska...

  1. YEAR

    National Nuclear Security Administration (NNSA)

    5 YEAR 2014 Males 61 Females 24 PAY PLAN YEAR 2014 SES 1 EJEK 8 EN 04 22 NN (Engineering) 23 NQ (ProfTechAdmin) 28 NU (TechAdmin Support) 3 YEAR 2014 American Indian Alaska...

  2. YEAR

    National Nuclear Security Administration (NNSA)

    69 YEAR 2014 Males 34 Females 35 YEAR 2014 SES 5 EJEK 1 EN 05 8 EN 04 5 NN (Engineering) 27 NQ (ProfTechAdmin) 22 NU (TechAdmin Support) 1 YEAR 2014 American Indian Alaska...

  3. YEAR

    National Nuclear Security Administration (NNSA)

    42 YEAR 2014 Males 36 Females 6 PAY PLAN YEAR 2014 SES 2 EJEK 5 EN 05 7 EN 04 6 EN 03 1 NN (Engineering) 15 NQ (ProfTechAdmin) 6 YEAR 2014 American Indian Alaska Native Male...

  4. Low-temperature specific heat measurement of a ferroelectric copolymer film of vinylidene fluoride and trifluoroethylene

    E-Print Network [OSTI]

    Andrei, Eva Y.

    Low-temperature specific heat measurement of a ferroelectric copolymer film of vinylidene fluoride; published 13 February 2004 The specific heat of a highly crystallized ferroelectric copolymer film to the pyroelectric coefficient in this temperature range. The specific heat data also show a rapid transition from

  5. Simulation of low temperature anaerobic digestion of dairy and swine manure q

    E-Print Network [OSTI]

    Simulation of low temperature anaerobic digestion of dairy and swine manure q D.T. Hill *, S Elsevier Science Ltd. All rights reserved. Keywords: Animal-waste; Simulation; Anaerobic-digestion; Swine into the psychrophilic (operating tem- peratures between 10°C and 25°C) anaerobic digestion of animal waste has been very

  6. THE LOW-TEMPERATURE THRESHOLD FOR PINK SALMON EGGS IN RELATION TO A PROPOSED HYDROELECTRIC INSTALLATION

    E-Print Network [OSTI]

    THE LOW-TEMPERATURE THRESHOLD FOR PINK SALMON EGGS IN RELATION TO A PROPOSED HYDROELECTRIC INSTALLATION JACK E. BAILEY' AND DALE R. EVANS' ABSTRACT A proposed hydroelectric installation in southeastern hydroelectric installation could result in temperatures as low as 4.5 0 C during spawning and initial incubation

  7. DOI: 10.1002/adma.200801764 Low-Temperature Deterministic Growth of Ge Nanowires

    E-Print Network [OSTI]

    Jo, Moon-Ho

    DOI: 10.1002/adma.200801764 Low-Temperature Deterministic Growth of Ge Nanowires Using Cu Solid-dimensional crystal growth essentially exploits the highly asymmetric growth kinetics in the radial and axial and the subsequent one-dimensional crystal growth.[1­3] One of the earliest and prevailing examples of such one

  8. Low-temperature solution growth of ZnO nanotube arrays

    E-Print Network [OSTI]

    Cao, Guozhong

    128 Low-temperature solution growth of ZnO nanotube arrays Ki-Woong Chae1,2, Qifeng Zhang1, Jeong, South Korea and 4National Center for Nanomaterials Technology, Pohang University of Science and Technology, Pohang, South Korea Email: Qifeng Zhang - qfzhang@u.washington.edu; Guozhong Cao* - gzcao

  9. The bugs that came in from the cold: molecular adaptations to low temperatures in insects

    E-Print Network [OSTI]

    Qin, Wensheng

    of genes differentially regulated by low temperatures have revealed that heat shock proteins, cold stress that reduced the impact of cold or freezing stress. This review focuses on our current interests in some placed under the umbrella of "cold hardi- ness", to counter the effects of such stress. Classification

  10. SUMMER STUDENT WORK PROJECT REPORT Measurement of the sensitivity of emulsion film in low temperature

    E-Print Network [OSTI]

    Ieki, Sei

    2013-01-01

    AEGIS experiment aims to measure the gravitational acceleration for antihydrogen. High position resolution detector which can be used in low temperature is needed and one of the candidate is emulsion detector. We have prepared a variable temperature cryostat and measure the relation between sensitivity of emulsion film and temperature.

  11. LOW TEMPERATURE OPTICAL STUDY OF MANGANOUS CHLORIDE M. REGIS and Y. FARGE

    E-Print Network [OSTI]

    Boyer, Edmond

    that, in a lot of transparent magnetic materials, the behaviour of the optical spectrum is related of metal atoms are separated by two layers of chlorine atoms. The crystal field D3d on the manganese ions627 LOW TEMPERATURE OPTICAL STUDY OF MANGANOUS CHLORIDE M. REGIS and Y. FARGE Laboratoire de

  12. Stirling Engines for Low-Temperature Solar-Thermal-Electric Power Generation

    E-Print Network [OSTI]

    Sanders, Seth

    Stirling Engines for Low-Temperature Solar-Thermal- Electric Power Generation Artin Der Minassians Energy Institute (UCEI) and National Science Foundation (NSF) #12;Stirling Engines for Low: Chair Date Date Date Date University of California, Berkeley Fall 2007 #12;Stirling Engines for Low

  13. Sources of CO and UHC Emissions in Low-Temperature Diesel Combustion Systems

    Broader source: Energy.gov [DOE]

    The sources of unburned hydrocarbons and CO emissions from a PCI-like, early-injection low-temperature combustion system are examined through a combination of homogeneous reactor modeling employing detailed kinetics, multi-dimensional modeling using a reduced kinetic scheme, engine-out emissions measurements, and in-cylinder imaging of the spatial distributions of UHC and CO.

  14. Syntrophic interactions drive the hydrogen production from glucose at low temperature in microbial electrolysis cells

    E-Print Network [OSTI]

    ) using ace- tate, making this technology a promising method for biohydrogen production even in very coldSyntrophic interactions drive the hydrogen production from glucose at low temperature in microbial, The Pennsylvania State University, University Park, PA 16802, USA h i g h l i g h t s " H2 production from glucose

  15. Untangling the formation of the cyclic carbon trioxide isomer in low temperature carbon dioxide ices

    E-Print Network [OSTI]

    Kaiser, Ralf I.

    Untangling the formation of the cyclic carbon trioxide isomer in low temperature carbon dioxide of the cyclic carbon trioxide isomer, CO3(X 1 A1), in carbon-dioxide-rich extraterrestrial ices and in the atmospheres of Earth and Mars were investigated experimentally and theoretically. Carbon dioxide ices were

  16. Demonstration of a Variable Phase Turbine Power System for Low Temperature Geothermal Resources

    SciTech Connect (OSTI)

    Hays, Lance G

    2014-07-07

    A variable phase turbine assembly will be designed and manufactured having a turbine, operable with transcritical, two-phase or vapor flow, and a generator – on the same shaft supported by process lubricated bearings. The assembly will be hermetically sealed and the generator cooled by the refrigerant. A compact plate-fin heat exchanger or tube and shell heat exchanger will be used to transfer heat from the geothermal fluid to the refrigerant. The demonstration turbine will be operated separately with two-phase flow and with vapor flow to demonstrate performance and applicability to the entire range of low temperature geothermal resources. The vapor leaving the turbine is condensed in a plate-fin refrigerant condenser. The heat exchanger, variable phase turbine assembly and condenser are all mounted on single skids to enable factory assembly and checkout and minimize installation costs. The system will be demonstrated using low temperature (237F) well flow from an existing large geothermal field. The net power generated, 1 megawatt, will be fed into the existing power system at the demonstration site. The system will demonstrate reliable generation of inexpensive power from low temperature resources. The system will be designed for mass manufacturing and factory assembly and should cost less than $1,200/kWe installed, when manufactured in large quantities. The estimated cost of power for 300F resources is predicted to be less than 5 cents/kWh. This should enable a substantial increase in power generated from low temperature geothermal resources.

  17. Membranes produced by PECVD technique for low temperature fuel cell applications

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 Membranes produced by PECVD technique for low temperature fuel cell applications Aboubakr to manufacture by plasma processes all active layers of fuel cells cores to be integrated in original compact stability; Transport properties. 1. Introduction Micro fuel cells have received considerable attention over

  18. Reliability of Capacitive RF MEMS Switches at High and Low Temperatures

    E-Print Network [OSTI]

    Espinosa, Horacio D.

    Reliability of Capacitive RF MEMS Switches at High and Low Temperatures Yong Zhu, Horacio D 60208-3111 Received 1 September 2003; accepted 24 February 2003 ABSTRACT: Some applications of RF MEMS temperatures in the range 60°C to 100°C are envisioned. The basic operation of a capacitive MEMS switch

  19. Low-temperature reactive coupling at polymerpolymer interfaces facilitated by supercritical CO2

    E-Print Network [OSTI]

    Low-temperature reactive coupling at polymer­polymer interfaces facilitated by supercritical CO2 S online 22 August 2005 Abstract Supercritical CO2 (scCO2) has been used to facilitate reactions in thin,6,7], the formation of such BCPs via reactive compatibilization [8­10], and the use of supercritical CO2 (scCO2) [11

  20. Enhanced High- and Low-Temperature Performance of NOx Reduction Catalyst Materials

    SciTech Connect (OSTI)

    Gao, Feng; Muntean, George G.; Peden, Charles HF; Howden, Ken; Currier, Neal; Kamasamudram, Krishna; Kumar, Ashok; Li, Junhui; Luo, Jinyong; Stafford, Randy; Yezerets, Aleksey; Castagnola, Mario; Chen, Hai-Ying; Hess, Howard ..

    2014-12-09

    In this annual CRADA program report, we will briefly highlight results from our recent studies of the stability of candidate K-based high temperature NSR materials, and comparative studies of low temperature performance of SSZ-13 and SAPO-34 CHA catalysts; in particular, recent results comparing Fe- and Cu-based CHA materials.

  1. Densification and Sintering Viscosity of Low-Temperature Co-Fired Ceramics

    E-Print Network [OSTI]

    Messing, Gary L.

    Densification and Sintering Viscosity of Low-Temperature Co-Fired Ceramics Aravind Mohanram,* Gary-temperature co-sintered ceramic systems, i.e., DuPont 951Tape (DU), Heraeus CT2000 (CT), and Ferro A6M (FE from 0.1 to 100 GPa . s between 73% and 95% density. Ceramic particle-filled glasses show a higher

  2. Development status of triple-junction solar cells optimized for low intensity low temperature applications

    E-Print Network [OSTI]

    Development status of triple-junction solar cells optimized for low intensity low temperature triple-junction solar cells manufactured by AZUR SPACE Solar Power GmbH under low intensity low unusable for deep space missions. Fig. 1: Example of a flat spot effect present in a triple- junction solar

  3. Seebeck Enhancement Through Miniband Conduction in IIIV Semiconductor Superlattices at Low Temperatures

    E-Print Network [OSTI]

    increase the asymmetry between hot and cold electron transport, in favor of hot electrons, increasing­V semiconductor superlattices can be significantly enhanced through miniband transport at low temperatures. Boltzmann transport in the relaxa- tion-time approximation is used to calculate the thermoelectric transport

  4. Low temperature chemical vapor deposition of Co thin films from Co2(CO)8

    E-Print Network [OSTI]

    Wang, Gwo-Ching

    Low temperature chemical vapor deposition of Co thin films from Co2(CO)8 D.-X. Yea,*, S. Pimanpanga chemical vapor deposition with a metallorganic Co2(CO)8 precursor. After Ar sputtering of the surface, Co2(CO)8, has been extensively used in cobalt CVD and is attractive, since Co is in its elemental

  5. Nanopore Patterned Pt Array Electrodes for Triple Phase Boundary Study in Low Temperature SOFC

    E-Print Network [OSTI]

    Cui, Yi

    Nanopore Patterned Pt Array Electrodes for Triple Phase Boundary Study in Low Temperature SOFC structural integrity and thermal stability at the solid oxide fuel cell SOFC operating temperature of 450, Meeting of the Society, October 4­9, 2009. Solid oxide fuel cells SOFCs are efficient energy conversion

  6. Acoustic propagation in an epoxy resin at very low temperatures P. Doussineau and W. Schn

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    thermal conductivity varies as T2. Their acoustic behaviour is also quite characteristic : the velocity to the presence of conduction elec- trons [2]. Most of the low temperatures properties of semiconducting glasses experiments in PMMA and polycarbonate (PQ have revealed a linear beha- viour of the attenuation of 18 GHz

  7. Low temperature oxidation of benzene and toluene in mixture with ndecane

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Low temperature oxidation of benzene and toluene in mixture with ndecane Olivier Herbinet Abstract The oxidation of two blends, benzene/ndecane and toluene/ndecane, was studied in a jetstirred of benzene, only phenol could be quantified. In the case of toluene, significant amounts

  8. Collector main replacement at Indianapolis Coke

    SciTech Connect (OSTI)

    Sickle, R.R. Van

    1997-12-31

    Indianapolis Coke is a merchant coke producer, supplying both foundry and blast furnace coke to the industry. The facility has three coke batteries: two 3 meter batteries, one Wilputte four divided and one Koppers Becker. Both batteries are underjet batteries and are producing 100% foundry coke at a net coking time of 30.6 hours. This paper deals with the No. 1 coke battery, which is a 72 oven, gun fired, 5 meter Still battery. No. 1 battery produces both foundry and blast furnace coke at a net coking rate of 25.4 hours. No. 1 battery was commissioned in 1979. The battery is equipped with a double collector main. Although many renovations have been completed to the battery, oven machinery and heating system, to date no major construction projects have taken place. Deterioration of the collector main was caused in part from elevated levels of chlorides in the flushing liquor, and temperature fluctuations within the collector main. The repair procedures are discussed.

  9. Thin film absorber for a solar collector

    DOE Patents [OSTI]

    Wilhelm, William G. (Cutchogue, NY)

    1985-01-01

    This invention pertains to energy absorbers for solar collectors, and more particularly to high performance thin film absorbers. The solar collectors comprising the absorber of this invention overcome several problems seen in current systems, such as excessive hardware, high cost and unreliability. In the preferred form, the apparatus features a substantially rigid planar frame with a thin film window bonded to one planar side of the frame. An absorber in accordance with the present invention is comprised of two thin film layers that are sealed perimetrically. In a preferred embodiment, thin film layers are formed from a metal/plastic laminate. The layers define a fluid-tight planar envelope of large surface area to volume through which a heat transfer fluid flows. The absorber is bonded to the other planar side of the frame. The thin film construction of the absorber assures substantially full envelope wetting and thus good efficiency. The window and absorber films stress the frame adding to the overall strength of the collector.

  10. YEAR

    National Nuclear Security Administration (NNSA)

    Males 139 Females 88 YEAR 2012 SES 13 EX 1 EJEK 8 EN 05 23 EN 04 20 EN 03 2 NN (Engineering) 91 NQ (ProfTechAdmin) 62 NU (TechAdmin Support) 7 YEAR 2012 American Indian...

  11. YEAR

    National Nuclear Security Administration (NNSA)

    25 Females 10 YEAR 2014 SES 1 EN 04 11 NN (Engineering) 8 NQ (ProfTechAdmin) 13 NU (TechAdmin Support) 2 YEAR 2014 American Indian Alaska Native Male (AIAN M) 0 American Indian...

  12. YEAR

    National Nuclear Security Administration (NNSA)

    2014 Males 81 Females 45 PAY PLAN YEAR 2014 SES 1 SL 1 EJEK 25 EN 04 26 EN 03 2 NN (Engineering) 23 NQ (ProfTechAdmin) 44 NU (TechAdmin Support) 4 YEAR 2014 American Indian...

  13. Wetting of Sodium on ??-Al2O3/YSZ Composites for Low Temperature Planar Sodium-Metal Halide Batteries

    SciTech Connect (OSTI)

    Reed, David M.; Coffey, Greg W.; Mast, Eric S.; Canfield, Nathan L.; Mansurov, Jirgal; Lu, Xiaochuan; Sprenkle, Vincent L.

    2013-04-01

    Wetting of Na on B”-Al2O3/YSZ composites was investigated using the sessile drop technique. The effects of moisture and surface preparation were studied at low temperatures. Electrical conductivity of Na/B”-Al2O3-YSZ/Na cells was also investigated at low temperatures and correlated to the wetting behavior. The use of planar B”-Al2O3 substrates at low temperature with low cost polymeric seals is realized due to improved wetting at low temperature and conductivity values consistent with the literature.

  14. Modeling the Effects of Steam-Fuel Reforming Products on Low Temperature Combustion of n-Heptane

    Broader source: Energy.gov [DOE]

    The effects of blends of base fuel (n-heptane) and fuel-reformed products on the low-temperature combustion process were investigated.

  15. YEAR

    National Nuclear Security Administration (NNSA)

    563 YEAR 2012 Males 518 Females 45 YEAR 2012 SES 1 EJEK 2 EN 04 1 EN 03 1 NN (Engineering) 12 NQ (ProfTechAdmin) 209 NU (TechAdmin Support) 2 NV (Nuc Mat Courier) 335 YEAR 2012...

  16. YEAR

    National Nuclear Security Administration (NNSA)

    7 YEAR 2012 Males 64 Females 33 YEAR 2012 SES 2 EJEK 3 EN 05 1 EN 04 30 EN 03 1 NN (Engineering) 26 NQ (ProfTechAdmin) 32 NU (TechAdmin Support) 2 YEAR 2012 American Indian...

  17. YEAR

    National Nuclear Security Administration (NNSA)

    4 YEAR 2012 Males 37 Females 7 YEAR 2012 SES 1 EJEK 6 EN 05 5 EN 04 7 EN 03 1 NN (Engineering) 17 NQ (ProfTechAdmin) 6 NU (TechAdmin Support) 1 YEAR 2012 American Indian Male 2...

  18. YEAR

    National Nuclear Security Administration (NNSA)

    7 YEAR 2011 Males 38 Females 9 YEAR 2011 SES 1 EJEK 6 EN 05 5 EN 04 7 EN 03 1 NN (Engineering) 19 NQ (ProfTechAdmin) 7 NU (TechAdmin Support) 1 YEAR 2011 American Indian Male 2...

  19. YEAR

    National Nuclear Security Administration (NNSA)

    8 YEAR 2013 Males 62 Females 26 YEAR 2013 SES 1 EJEK 3 EN 05 1 EN 04 28 EN 03 1 NN (Engineering) 25 NQ (ProfTechAdmin) 27 NU (TechAdmin Support) 2 YEAR 2013 American Indian...

  20. YEAR

    National Nuclear Security Administration (NNSA)

    6 YEAR 2012 Males 64 Females 32 YEAR 2012 SES 1 EJEK 5 EN 05 3 EN 04 23 EN 03 9 NN (Engineering) 18 NQ (ProfTechAdmin) 33 NU (TechAdmin Support) 4 YEAR 2012 American Indian...

  1. YEAR

    National Nuclear Security Administration (NNSA)

    5 YEAR 2013 Males 58 Females 27 YEAR 2013 SES 1 EJEK 4 EN 05 3 EN 04 21 EN 03 8 NN (Engineering) 16 NQ (ProfTechAdmin) 28 NU (TechAdmin Support) 4 YEAR 2013 American Indian...

  2. YEAR

    National Nuclear Security Administration (NNSA)

    78 YEAR 2012 Males 57 Females 21 YEAR 2012 SES 2 SL 1 EJEK 12 EN 04 21 EN 03 2 NN (Engineering) 12 NQ (ProfTechAdmin) 24 NU (TechAdmin Support) 4 YEAR 2012 American Indian Male...

  3. Solar heat pump systems with refrigerant-filled collectors

    SciTech Connect (OSTI)

    O'Dell, M.P.; Beckman, W.A.; Mitchell, J.W.

    1983-01-01

    The heat pump system with a refrigerant-filled evaporator consists of a standard air-to-air or air-to-liquid heat pump that utilizes a solar panel as the evaporator. A combination of solar energy and convection heat transfer acts as the ''free'' energy absorbed by the collector/evaporator. In this paper, the seasonal performance of such systems for industrial applications will be presented. Performance of collector/evaporator heat pumps will be compared with alternative heat pump and solar systems. The benefits of covered and coverless collector/evaporators will be discussed. Results to date have shown that refrigerant-filled collector heat pumps do not perform as well as conventional heat pumps at small collector areas but have as much as 15% performance improvement over conventional heat pumps at an appropriate collector area.

  4. Recycling nickel electroplating rinse waters by low temperature evaporation and reverse osmosis

    SciTech Connect (OSTI)

    Lindsey, T.C.; Randall, P.M.

    1993-08-01

    Low temperature evaporation and reverse osmosis systems were each evaluated (on a pilot scale) on their respective ability to process rinse water collected from a nickel electroplating operation. Each system offered advantages under specific operating conditions. The low temperature evaporation system was best suited to processing solutions with relatively high (greater than 4,000 to 5,000 mg/L) nickel concentrations. The reverse osmosis system was best adapted to conditions where the feed solution had a relatively low (less than4,000 to 5,000 mg/L) nickel concentration. In electroplating operations where relatively dilute rinse water solutions must be concentrated to levels acceptable for replacement in the plating bath, a combination of the two technologies might provide the best process alternative.

  5. Low temperature n-butane oxidation skeletal mechanism, based on multilevel approach

    SciTech Connect (OSTI)

    Strelkova, M.I.; Sukhanov, L.P.; Kirillov, I.A.; Safonov, A.A.; Umanskiy, S.Ya.; Potapkin, B.V.; Pasman, H.J.; Tentner, A.M.

    2010-04-15

    In order to reconcile an increasingly large deviation (order of magnitude) of the ignition delay time at decreasing initial temperature, computed using the prior art kinetic schemes, with the available experimental values, a new skeletal mechanism (54 species, 94 reactions) for low-temperature (500-800 K) ignition of n- butane in air based on ab initio calculations is developed. The skeletal mechanism obtained accurately reproduces n-butane combustion kinetics for the practically important ranges of pressure, temperature and fuel-air equivalence ratio, especially in the low-temperature range. The elaborated first principal skeletal chemical kinetic mechanism of n-butane oxidation was validated against available experimental results for normal and elevated initial pressure (1-15 atm) using the Chemical Work Bench code. A good agreement with experiments was shown. (author)

  6. Theoretical study of reactions of HO{sub 2} in low-temperature oxidation of benzene

    SciTech Connect (OSTI)

    Altarawneh, Mohammednoor; Dlugogorski, Bogdan Z.; Kennedy, Eric M.; Mackie, John C.

    2010-07-15

    We have generated a set of thermodynamic and kinetic parameters for the reactions involving HO{sub 2} in the very early stages of benzene oxidation at low temperatures using density functional theory (DFT). In particular, we report the rate constants for the reactions of HO{sub 2} with benzene and phenyl. The calculated reaction rate constant for the abstraction of H-C{sub 6}H{sub 5} by HO{sub 2} is found to be in good agreement with the limited experimental values. HO{sub 2} addition to benzene is found to be more important than direct abstraction. We show that the reactions of HO{sub 2} with the phenyl radical generate the propagating radical OH in a highly exoergic reaction. The results presented herein should be useful in modeling the oxidation of aromatic compounds at low temperatures. (author)

  7. Low temperature photochemical vapor deposition of alloy and mixed metal oxide films

    DOE Patents [OSTI]

    Liu, David K. (San Pablo, CA)

    1992-01-01

    Method and apparatus for formation of an alloy thin film, or a mixed metal oxide thin film, on a substrate at relatively low temperatures. Precursor vapor(s) containing the desired thin film constituents is positioned adjacent to the substrate and irradiated by light having wavelengths in a selected wavelength range, to dissociate the gas(es) and provide atoms or molecules containing only the desired constituents. These gases then deposit at relatively low temperatures as a thin film on the substrate. The precursor vapor(s) is formed by vaporization of one or more precursor materials, where the vaporization temperature(s) is selected to control the ratio of concentration of metals present in the precursor vapor(s) and/or the total precursor vapor pressure.

  8. The yield of Amorphous Solids Under Stress Control at Low Temperatures

    E-Print Network [OSTI]

    Valery Ilyin; Itamar Procaccia; Carmel Shor; Murari Singh

    2015-04-21

    The yield of amorphous solids like metallic glasses under external stress was discussed asserting that it is related to the glass transition by increasing temperature, or that it can be understood using statistical theories of various sorts. Here we study the approach to stress-controlled yield and argue that neither assertions can be supported, at least at low temperatures. The yield of amorphous solids at low temperatures is a highly structured phenomenon, characterized by a specific series of mechanical instabilities, and having no similarity at all to fluidization by increased temperature, real or fictive. The series of instabilities followed by stress controlled yield at low but finite temperature protocols can be predicted by analyzing athermal quasi-static strain controlled protocols, making the latter highly relevant for the deep understanding of the mechanical properties of amorphous solids.

  9. A Detailed Chemical Kinetic Analysis of Low Temperature Non-Sooting Diesel Combustion

    SciTech Connect (OSTI)

    Aceves, S M; Flowers, D L

    2004-10-01

    We have developed a model of the diesel fuel injection process for application to analysis of low temperature non-sooting combustion. The model uses a simplified mixing correlation and detailed chemical kinetics, and analyzes a parcel of fuel as it moves along the fuel jet, from injection into evaporation and ignition. The model predicts chemical composition and soot precursors, and is applied at conditions that result in low temperature non-sooting combustion. Production of soot precursors is the first step toward production of soot, and modeling precursor production is expected to give insight into the overall evolution of soot inside the engine. The results of the analysis show that the model has been successful in describing many of the observed characteristics of low temperature combustion. The model predicts results that are qualitatively similar to those obtained for soot formation experiments at conditions in which the EGR rate is increased from zero to very high values as the fueling rate is kept constant. The model also describes the two paths to achieve non-sooting combustion. The first is smokeless rich combustion and the second is modulated kinetics (MK). The importance of the temperature after ignition and the equivalence ratio at the time of ignition is demonstrated, as these parameters can be used to collapse onto a single line all the results for soot precursors for multiple fueling rates. A parametric analysis indicates that precursor formation increases considerably as the gas temperature in the combustion chamber and the characteristic mixing time are increased. The model provides a chemical kinetic description of low temperature diesel combustion that improves the understanding of this clean and efficient regime of operation.

  10. Hydrothermal metamorphism and low-temperature alteration on the Mid-Atlantic ridge 

    E-Print Network [OSTI]

    Peron, Philippe Raymond

    1978-01-01

    and trace el- ement compositions and mineralogy of low-temperature altered basalts and hydrotherally alt. ered (metamorphosed) basalts; (2) to compare these an- alyses to those of experimentally altered basalts and to those of meta- morphosed oceanic... by changes of whole rock elemental compositions. Humphris (1975) finds TAB1. E 1: Minerals commonly found in metamorphic submarine basalts. Study Minerals Method of identification Miyashiro et al. (1971) chlorite, quartz, epidote albite, natrolite...

  11. Effects of neutron radiation on power silicon diodes at low temperatures 

    E-Print Network [OSTI]

    English, Kevin Joseph

    1991-01-01

    as opposed to lightly doped. Since the primary mechanism of conduction in the base region is injected carrier modulation, this last assumption should not cause a noticeable variation between these computations and the actual diodes. L/W 200 150 ----- I...EFFECIS OF NEUTRON RADIATION ON POWER SILICON DIODES AT LOW TEMPERATURES A Thesis by KEVIN JOSEPH ENGLISH Submitted to the Office of Graduate Studies Texas A&M University in partial fulfillment of the requirements for the degree of MASTER...

  12. Convergence to equilibrium of a linearized quantum Boltzmann equation for bosons at very low temperature

    E-Print Network [OSTI]

    Miguel Escobedo; Minh-Binh Tran

    2014-12-02

    We consider an approximation of the linearised equation of the homogeneous Boltzmann equation that describes the distribution of quasiparticles in a dilute gas of bosons at low temperature. The corresponding collision frequency is neither bounded from below nor from above. We prove the existence and uniqueness of solutions satisfying the conservation of energy. We show that these solutions converge to the corresponding stationary state, at an algebraic rate as time tends to infinity.

  13. Negative thermal expansion and anomalies of heat capacity of LuB 50 at low temperatures

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Novikov, V. V.; Zhemoedov, N. A.; Matovnikov, A. V.; Mitroshenkov, N. V.; Kuznetsov, S. V.; Bud'ko, S. L.

    2015-07-20

    Heat capacity and thermal expansion of LuB50 boride were experimentally studied in the 2–300 K temperature range. The data reveal an anomalous contribution to the heat capacity at low temperatures. The value of this contribution is proportional to the first degree of temperature. It was identified that this anomaly in heat capacity is caused by the effect of disorder in the LuB50crystalline structure and it can be described in the soft atomic potential model (SAP). The parameters of the approximation were determined. The temperature dependence of LuB50 heat capacity in the whole temperature range was approximated by the sum ofmore »SAP contribution, Debye and two Einstein components. The parameters of SAP contribution for LuB50 were compared to the corresponding values for LuB66, which was studied earlier. Negative thermal expansion at low temperatures was experimentally observed for LuB50. The analysis of the experimental temperature dependence for the Gruneisen parameter of LuB50 suggested that the low-frequency oscillations, described in SAP mode, are responsible for the negative thermal expansion. Thus, the glasslike character of the behavior of LuB50 thermal characteristics at low temperatures was confirmed.« less

  14. Development of 400/sup 0/F sealants for flat plate solar collector construction and installation. Final report, 1 October 1978-30 September 1979

    SciTech Connect (OSTI)

    Morris, L.; Schubert, R.J.

    1980-03-01

    Twenty candidate sealants representing ten different polymer types were evaluated as potential solar collector sealants. Polymer types tested included epichlorohydrin rubber, EPDM rubber, silicone, polysulfide, acrylate rubber, and a fluoroelastomer. Initial screening of sealants consisted of measuring high temperature stability and adhesion retention. Several sealant compositions exhibited satisfactory performance in these tests and were selected for further evaluation. These materials were based on an EPDM rubber, a Viton fluoroelastomer, and silicone polymers. Further testing of these candidate materials included determination of adhesion retention under uv/water/heat conditions, fogging temperature, low temperature flexibility, and physical properties. Four silicone-based materials appeared to be suitable candidates for sealing solar collectors. These include Dow Corning 90-006-02 and 3120, General Electric 1200, and PR-1939 from Products Research and Chemical Corporation.

  15. YEAR

    National Nuclear Security Administration (NNSA)

    2012 Males 149 Females 115 YEAR 2012 SES 17 EX 1 EJEK 7 EN 05 2 EN 04 9 EN 03 2 NN (Engineering) 56 NQ (ProfTechAdmin) 165 NU (TechAdmin Support) 4 GS 13 1 YEAR 2012 American...

  16. YEAR

    National Nuclear Security Administration (NNSA)

    9 Females 24 PAY PLAN YEAR 2014 SES 1 EJEK 4 EN 05 3 EN 04 22 EN 03 8 NN (Engineering) 15 NQ (ProfTechAdmin) 27 NU (TechAdmin Support) 3 YEAR 2014 American Indian Alaska Native...

  17. YEAR

    National Nuclear Security Administration (NNSA)

    8 Females 25 PAY PLAN YEAR 2014 SES 1 EJEK 3 EN 05 1 EN 04 25 EN 03 1 NN (Engineering) 25 NQ (ProfTechAdmin) 25 NU (TechAdmin Support) 2 YEAR 2014 American Indian Alaska Native...

  18. Comparative studies of low-temperature watergas shift reaction over Pt=CeO2, Au=CeO2,

    E-Print Network [OSTI]

    Gulari, Erdogan

    , has shown that ceria affects in a number of catalytic reactions. Cerium oxide or Ceria (CeO2) may attention re- cently because of their catalytic activity in low temperature CO oxidation, catalytic; accepted 13 March 2003 Abstract We studied catalytic low-temperature water­gas shift (WGS) reaction over

  19. On the detection of higher order carbon sulfides (CSx; x = 46) in low temperature carbon disulfide ices

    E-Print Network [OSTI]

    Kaiser, Ralf I.

    been exploited to trap and to produce carbon sulfur clusters. Pyro- lysis and ultra violet (UVOn the detection of higher order carbon sulfides (CSx; x = 4­6) in low temperature carbon disulfide (CS6, C2) ­ were detected for the first time via infrared spectroscopy in low temperature car- bon

  20. PHILOSOPHICAL MAGAZINE A, 1999, VOL. 79, NO. 10, 2485 2504 Low-temperature dynamic precipitation in a

    E-Print Network [OSTI]

    Niewczas, Marek

    PHILOSOPHICAL MAGAZINE A, 1999, VOL. 79, NO. 10, 2485± 2504 Low-temperature dynamic precipitation in revised form 18 November 1998] Abstract Dynamic precipitation during low-temperature deformation-situ resistivity in the temperature range 4.2± 300K. At 300K, dynamic precipitation is observed both

  1. Tensioning device for a stretched membrane collector

    DOE Patents [OSTI]

    Murphy, L.M.

    1984-01-01

    Disclosed is a solar concentrating collector comprising an elestic membrane member for concentrating sunlight, a frame for holding the membrane member in plane and in tension, and a tensioning means for varying the tension of the membrane member. The tensioning means is disposed at the frame and is adapted to releasably attach the membrane member thereto. The tensioning means is also adapted to uniformly and symmetrically subject the membrane member to stretching forces such that membrane stresses produced thereby are distributed uniformly over a thickness of the membrane member and reciprocal twisting moments are substantially prevented from acting about said frame.

  2. Tensioning device for a stretched membrane collector

    DOE Patents [OSTI]

    Murphy, Lawrence M. (Lakewood, CO)

    1984-01-01

    Disclosed is a solar concentrating collector comprising an elastic membrane member for concentrating sunlight, a frame for holding the membrane member in plane and in tension, and a tensioning means for varying the tension of the membrane member. The tensioning means is disposed at the frame and is adapted to releasably attach the membrane member thereto. The tensioning means is also adapted to uniformly and symmetrically subject the membrane member to stretching forces such that membrane stresses produced thereby are distributed uniformly over a thickness of the membrane member and reciprocal twisting moments are substantially prevented from acting about said frame.

  3. Low-Temperature Biodiesel Research Reveals Potential Key to Successful Blend Performance (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-02-01

    Relatively low-cost solutions could improve reliability while making biodiesel blends an affordable option. While biodiesel has very low production costs and the potential to displace up to 10% of petroleum diesel, until now, issues with cold weather performance have prevented biodiesel blends from being widely adopted. Some biodiesel blends have exhibited unexplained low-temperature performance problems even at blend levels as low as 2% by volume. The most common low-temperature performance issue is vehicle stalling caused by fuel filter clogging, which prevents fuel from reaching the engine. Research at the National Renewable Energy Laboratory (NREL) reveals the properties responsible for these problems, clearing a path for the development of solutions and expanded use of energy-conserving and low-emissions alternative fuel. NREL researchers set out to study the unpredictable nature of biodiesel crystallization, the condition that impedes the flow of fuel in cold weather. Their research revealed for the first time that saturated monoglyceride impurities common to the biodiesel manufacturing process create crystals that can cause fuel filter clogging and other problems when cooling at slow rates. Biodiesel low-temperature operational problems are commonly referred to as 'precipitates above the cloud point (CP).' NREL's Advanced Biofuels team spiked distilled soy and animal fat-derived B100, as well as B20, B10, and B5 biodiesel blends with three saturated monoglycerides (SMGs) at concentration levels comparable to those of real-world fuels. Above a threshold or eutectic concentration, the SMGs (monomyristin, monopalmitin, and monostearin) were shown to significantly raise the biodiesel CP, and had an even greater impact on the final melting temperature. Researchers discovered that upon cooling, monoglyceride initially precipitates as a metastable crystal, but it transforms over time or upon slight heating into a more stable crystal with a much lower solubility and higher melting temperature - and with increased potential to cause vehicle performance issues. This explains why fuel-filter clogging typically occurs over the course of long, repeated diurnal cooling cycles. The elevated final melting points mean that restarting vehicles with clogged filters can be difficult even after ambient temperatures have warmed to well above CP. By examining how biodiesel impurities affect filtration and crystallization during warming and cooling cycles, NREL researchers uncovered an explanation for poor biodiesel performance at low temperatures. The observation of a eutectic point, or a concentration below which SMGs have no effect, indicates that SMGs do not have to be completely removed from biodiesel to solve low-temperature performance problems.

  4. COMPARISON OF PROPORTIONAL AND ON/OFF SOLAR COLLECTOR LOOP CONTROL STRATEGIES USING A DYNAMIC COLLECTOR MODEL

    E-Print Network [OSTI]

    Schiller, Steven R.

    2013-01-01

    Proceedings of the Solar Energy Storage Options Workshop (Heilbein, s. "Solar Applications of Thermal Energy Storage."the fact that solar collectors act as storage devices. \\~en

  5. Efficient solar cooling: first ever non-tracking solar collectors powering a double effect absorption chiller

    E-Print Network [OSTI]

    Poiry, Heather Marie

    2011-01-01

    23-2011 Power [kW] Chiller Sun Collectors Natural Gas Figurea North-South collector showing the incoming sun rays, reda North-South collector showing the incoming sun rays, red

  6. A SOLAR TEST COLLECTOR FOR EVALUATION OF BOTH SELECTIVE AND NON-SELECTIVE ABSORBERS

    E-Print Network [OSTI]

    Lampert, Carl M.

    2011-01-01

    respect to The collector pipes consist the sun, to suit thethe collector so it will be perpendicular to the sun's rayssun. model has been presented which models this collector's

  7. Efficient solar cooling: first ever non-tracking solar collectors powering a double effect absorption chiller

    E-Print Network [OSTI]

    Poiry, Heather Marie

    2011-01-01

    Ari Rabl, “Active Solar Collectors and Their Applications,”A. and Winston, R. (1980) “Solar collectors for low anda standard flat plate solar collector, and to the right is a

  8. A SOLAR TEST COLLECTOR FOR EVALUATION OF BOTH SELECTIVE AND NON-SELECTIVE ABSORBERS

    E-Print Network [OSTI]

    Lampert, C.M.

    2011-01-01

    Standards for ~sting Solar Collectors and Thermal StorageLBL-6974 Rev. e. ' A SOLAR TEST COLLECTOR FOR EVALUATION OF+ 0.66 Fig. L r2 r2 Solar test collector flow chart. Type

  9. METAL FOILS FOR DIRECT APPLICATION OF ABSORBER COATINGS ON SOLAR COLLECTORS

    E-Print Network [OSTI]

    Lampert, Carl M.

    2011-01-01

    Plated Metal Foils and Solar Collector Conference. U. S.Surfaces on Flat Plate Solar Collectors". Proceedings of 2ndSputtering for Depositing Solar Collector Coatings i i •

  10. METAL FOILS FOR DIRECT APPLICATION OF ABSORBER COATINGS ON SOLAR COLLECTORS

    E-Print Network [OSTI]

    Lampert, Carl M.

    2011-01-01

    for Depositing Solar Collector Coatings i i • Proceedings ofSymposium on Coatings for Solar Collectors, St. Louis, MO,OF ABSORBER COATINGS ON SOLAR COLLECTORS Carl M. Lampert

  11. A SOLAR TEST COLLECTOR FOR EVALUATION OF BOTH SELECTIVE AND NON-SELECTIVE ABSORBERS

    E-Print Network [OSTI]

    Lampert, C.M.

    2011-01-01

    solar best collector was designed for the testing of thermally absorbing coatingssolar test collector was designed so that certain collector parameters could be held constant or controlled and yet different coatings

  12. METAL FOILS FOR DIRECT APPLICATION OF ABSORBER COATINGS ON SOLAR COLLECTORS

    E-Print Network [OSTI]

    Lampert, Carl M.

    2011-01-01

    of the AES Coatings for Solar Collectors Symposium. Atlanta.Symposium on Coatings for Solar Collectors, St. Louis, MO,OF ABSORBER COATINGS ON SOLAR COLLECTORS Carl M. Lampert

  13. Combined current collector and electrode separator

    DOE Patents [OSTI]

    Gerenser, R.J.; Littauer, E.L.

    1983-08-23

    This relates to reactive metal cells wherein there is a cathode and a consumable anode. It is necessary to separate the cathode from the anode so that an electrolyte may constantly flow over the face of the anode opposing the cathode. It has been found that this separator may also beneficially function as a current collector. The combined current collector and separator includes a peripheral supporting frame of which a portion may function as a bus-bar. A plurality of bars or ribs extend in parallel relation across the opening defined by the supporting frame and are electrically connected to the bus-bar portion. It is preferred that each bar or rib have a pointed or line edge which will engage and slightly bite into the associated anode to maintain the bar or rib in electrical contact with the anode. This abstract forms no part of the specification of this application and is not to be construed as limiting the claims of the application. 6 figs.

  14. Project Profile: Next-Generation Solar Collectors for CSP

    Broader source: Energy.gov [DOE]

    3M Company, under the 2012 SunShot Concentrating Solar Power (CSP) R&D FOA, is developing high-reflectivity films and high-rigidity structures that can replace current solar collectors that use heavy glass mirrors. Solar collectors represent the most expensive component of a CSP system.

  15. A new parabolic trough solar collector P. Kohlenbach1

    E-Print Network [OSTI]

    A new parabolic trough solar collector P. Kohlenbach1 , S. McEvoy1 , W. Stein1 , A. Burton1 , K) power generation system. The parabolic trough collectors have been installed in the National Solar in a 2x2 matrix with a total aperture area of approximately 132m2 . The mirrors reflect the sun

  16. Accepted Manuscript Title: Metal Current Collector-Free Freestanding

    E-Print Network [OSTI]

    Cui, Yi

    energy storage devices with large capacities to keep pace with their ever-growing demand in variousAccepted Manuscript Title: Metal Current Collector-Free Freestanding Silicon-Carbon 1D, Metal Current Collector-Free Freestanding Silicon-Carbon 1D Nanocomposites for Ultralight Anodes

  17. Connectable solar air collectors Solar Energy Centre Denmark

    E-Print Network [OSTI]

    Connectable solar air collectors Solar Energy Centre Denmark Danish Technological Institute SEC-R-22 #12;Connectable solar air collectors Søren Østergaard Jensen Miroslav Bosanac Solar Energy Centre for renewable energy of the Danish Energy Agency. The project group behind the project was: Solar Energy Centre

  18. Current collectors for rechargeable Li-Air batteries

    SciTech Connect (OSTI)

    Veith, Gabriel M [ORNL; Dudney, Nancy J [ORNL

    2011-01-01

    Here we report the negative influence of porous nickel foam for use as current collectors in rechargeable Li-air batteries. Uncoated nickel foam promotes the decomposition of LiPF6-organic carbonate electrolytes under normal charging conditions reported for rechargeable Li-air cells. We have identified Ni free porous carbon supports as more appropriate cathode current collectors.

  19. YEAR

    National Nuclear Security Administration (NNSA)

    -9.09% YEAR 2012 2013 SES 1 1 0.00% EN 05 1 1 0.00% EN 04 11 11 0.00% NN (Engineering) 8 8 0.00% NQ (ProfTechAdmin) 17 14 -17.65% NU (TechAdmin Support) 2 2...

  20. YEAR

    National Nuclear Security Administration (NNSA)

    Females 863 YEAR 2013 SES 102 EX 3 SL 1 EJEK 89 EN 05 41 EN 04 170 EN 03 18 NN (Engineering) 448 NQ (ProfTechAdmin) 1249 NU (TechAdmin Support) 76 NV (Nuc Mat Courier) 321...

  1. YEAR

    National Nuclear Security Administration (NNSA)

    Females 942 YEAR 2012 SES 108 EX 4 SL 1 EJEK 96 EN 05 45 EN 04 196 EN 03 20 NN (Engineering) 452 NQ (ProfTechAdmin) 1291 NU (TechAdmin Support) 106 NV (Nuc Mat Courier) 335...

  2. YEAR

    National Nuclear Security Administration (NNSA)

    YEAR 2012 2013 SES 2 1 -50.00% EN 05 0 1 100.00% EN 04 4 4 0.00% NN (Engineering) 13 12 -7.69% NQ (ProfTechAdmin) 13 9 -30.77% NU (TechAdmin Support) 1 1...

  3. Efficiency of a solar collector with internal boiling

    SciTech Connect (OSTI)

    Neeper, D.A.

    1986-01-01

    The behavior of a solar collector with a boiling fluid is analyzed to provide a simple algebraic model for future systems simulations, and to provide guidance for testing. The efficiency equation is developed in a form linear in the difference between inlet and saturation (boiling) temperatures, whereas the expression upon which ASHRAE Standard 109P is based utilizes the difference between inlet and ambient temperatures. The coefficient of the revised linear term is a weak function of collector parameters, weather, and subcooling of the working fluid. For a glazed flat-plate collector with metal absorber, the coefficient is effectively constant. Therefore, testing at multiple values of insolation and subcooling, as specified by ASHRAE 109P, should not be necessary for most collectors. The influences of collector properties and operating conditions on efficiency are examined.

  4. Selective flotation of phosphate minerals with hydroxamate collectors

    DOE Patents [OSTI]

    Miller, Jan D. (Salt Lake City, UT); Wang, Xuming (Salt Lake City, UT); Li, Minhua (Salt Lake City, UT)

    2002-01-01

    A method is disclosed for separating phosphate minerals from a mineral mixture, particularly from high-dolomite containing phosphate ores. The method involves conditioning the mineral mixture by contacting in an aqueous in environment with a collector in an amount sufficient for promoting flotation of phosphate minerals. The collector is a hydroxamate compound of the formula; ##STR1## wherein R is generally hydrophobic and chosen such that the collector has solubility or dispersion properties it can be distributed in the mineral mixture, typically an alkyl, aryl, or alkylaryl group having 6 to 18 carbon atoms. M is a cation, typically hydrogen, an alkali metal or an alkaline earth metal. Preferably, the collector also comprises an alcohol of the formula, R'--OH wherein R' is generally hydrophobic and chosen such that the collector has solubility or dispersion properties so that it can be distributed in the mineral mixture, typically an alkyl, aryl, or alkylaryl group having 6 to 18 carbon atoms.

  5. Performance of a double pass solar air collector

    SciTech Connect (OSTI)

    Ramani, B.M.; Gupta, Akhilesh; Kumar, Ravi

    2010-11-15

    Double pass counter flow solar air collector with porous material in the second air passage is one of the important and attractive design improvement that has been proposed to improve the thermal performance. This paper presents theoretical and experimental analysis of double pass solar air collector with and without porous material. A mathematical model has been developed based on volumetric heat transfer coefficient. Effects of various parameters on the thermal performance and pressure drop characteristics have been discussed. Comparison of results reveals that the thermal efficiency of double pass solar air collector with porous absorbing material is 20-25% and 30-35% higher than that of double pass solar air collector without porous absorbing material and single pass collector respectively. (author)

  6. MINICHANNEL-TUBE SOLAR THERMAL COLLECTORS FOR LOW TO MEDIUM TEMPERATURE APPLICATIONS

    E-Print Network [OSTI]

    Duong, Van Thuc

    2015-01-01

    minichannel solar collector by analyzing efficiency (q fminichannel solar collector by analyzing efficiency (q ffluid. Increase in efficiency of solar water heaters can

  7. METAL FOILS FOR DIRECT APPLICATION OF ABSORBER COATINGS ON SOLAR COLLECTORS

    E-Print Network [OSTI]

    Lampert, Carl M.

    2011-01-01

    for Depositing Solar Collector Coatings i i • Proceedingsof the AES Coatings for Solar Collectors Symposium. Atlanta.48. REFERENCES C. M. • "Coatings for Enhanced Photothermal

  8. MINICHANNEL-TUBE SOLAR THERMAL COLLECTORS FOR LOW TO MEDIUM TEMPERATURE APPLICATIONS

    E-Print Network [OSTI]

    Duong, Van Thuc

    2015-01-01

    the abundance and potential of harnessing solar energy: itminichannel solar collector has the potential to competeMarket potential of the minichannel solar collectors are

  9. Low temperature laser scanning microscopy of a superconducting radio-frequency cavity

    SciTech Connect (OSTI)

    Ciovati, Gianluigi; Baldwin, Charles; Cheng, Guangfeng; Flood, Roger; Jordan, Kevin; Kneisel, Peter; Morrone, Michael; Nemes, George; Turlington, Larry; Wang, Haipeng; Wilson, Katherine

    2012-03-16

    An apparatus was developed to obtain, for the first time, 2D maps of the surface resistance of the inner surface of an operating superconducting radio-frequency niobium cavity by a low-temperature laser scanning microscopy technique. This allows identifying non-uniformities of the surface resistance with a spatial resolution of about one order of magnitude better than with earlier methods. A signal-to-noise ratio of about 10 dB was obtained with 240 mW laser power and 1 Hz modulation frequency. The various components of the apparatus, the experimental procedure and results are discussed in details in this contribution.

  10. Low temperature laser scanning microscopy of a superconducting radio-frequency cavity

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Ciovati, G.; Anlage, Steven M.; Baldwin, C.; Cheng, G.; Flood, R.; Jordan, K.; Kneisel, P.; Morrone, M.; Nemes, G.; Turlington, L.; et al

    2012-03-16

    An apparatus was created to obtain, for the first time, 2D maps of the surface resistance of the inner surface of an operating superconducting radio-frequency niobium cavity by a low-temperature laser scanning microscopy technique. This allows identifying non-uniformities of the surface resistance with a spatial resolution of about one order of magnitude better than with earlier methods. A signal-to-noise ratio of about 10 dB was obtained with 240 mW laser power and 1 Hz modulation frequency. The various components of the apparatus, the experimental procedure and results are discussed in details in this contribution.

  11. Characterization of low-temperature microwave loss of thin aluminum oxide formed by plasma oxidation

    SciTech Connect (OSTI)

    Deng, Chunqing, E-mail: cdeng@uwaterloo.ca; Otto, M.; Lupascu, A., E-mail: alupascu@uwaterloo.ca [Institute for Quantum Computing, Department of Physics and Astronomy, and Waterloo Institute for Nanotechnology, University of Waterloo, Waterloo, Ontario N2L 3G1 (Canada)

    2014-01-27

    We report on the characterization of microwave loss of thin aluminum oxide films at low temperatures using superconducting lumped resonators. The oxide films are fabricated using plasma oxidation of aluminum and have a thickness of 5?nm. We measure the dielectric loss versus microwave power for resonators with frequencies in the GHz range at temperatures from 54 to 303?mK. The power and temperature dependence of the loss are consistent with the tunneling two-level system theory. These results are relevant to understanding decoherence in superconducting quantum devices. The obtained oxide films are thin and robust, making them suitable for capacitors in compact microwave resonators.

  12. Liquid phase low temperature method for production of methanol from synthesis gas and catalyst formulations therefor

    DOE Patents [OSTI]

    Mahajan, Devinder

    2005-07-26

    The invention provides a homogenous catalyst for the production of methanol from purified synthesis gas at low temperature and low pressure which includes a transition metal capable of forming transition metal complexes with coordinating ligands and an alkoxide, the catalyst dissolved in a methanol solvent system, provided the transition metal complex is not transition metal carbonyl. The coordinating ligands can be selected from the group consisting of N-donor ligands, P-donor ligands, O-donor ligands, C-donor ligands, halogens and mixtures thereof.

  13. Carrier dynamics in Beryllium doped low-temperature-grown InGaAs/InAlAs

    SciTech Connect (OSTI)

    Globisch, B., E-mail: Bjoern.Globisch@hhi.fraunhofer.de; Dietz, R. J. B.; Stanze, D.; Göbel, T.; Schell, M. [Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute, Einsteinufer 37, 10587 Berlin (Germany)

    2014-04-28

    The electron and hole dynamics in low-temperature-grown InGaAs/InAlAs multiple quantum well structures are studied by optical pump-probe transmission measurements for Beryllium (Be) doping levels between 3?×?10{sup 17}?cm{sup ?3} and 4?×?10{sup 18}?cm{sup ?3}. We investigate electron dynamics in the limit cases of unsaturated and completely saturated electron trapping. By expanding a rate equation model in these limits, the details of carrier dynamics are revealed. Electrons are trapped by ionized arsenic antisites, whereas recombination occurs between trapped electrons and holes trapped by negatively charged Be dopants.

  14. Diffusion Dynamics of Water Molecules in a LiCl Solution: a Low-Temperature Crossover

    SciTech Connect (OSTI)

    Mamontov, Eugene [ORNL

    2009-01-01

    A quasielastic neutron scattering experiment probing the dynamics of water molecules on the pico- to nanosecond time scale in an aqueous solution of lithium chloride has detected a crossover at about 220-230 K between the high-temperature non-Arrhenius and low-temperature Arrhenius behavior. This is the first experiment where the crossover in the dynamics of water molecules is detected in bulk rather than in confinement. The results suggest that the dynamic crossover observed in the current and many recent experiments is not linked to the specific properties of water; instead, it may represent a more general dynamic transition.

  15. Vacancy formation and strain in low-temperature Cu/Cu(100) growth

    SciTech Connect (OSTI)

    Voter, Arthur F [Los Alamos National Laboratory; Uberuaga, Blas P [Los Alamos National Laboratory; Shim, Yunsic [UNIV. OF TOLEDO; Borovikov, Valery [UNIV. OF TOLEDO

    2008-01-01

    The development of compressive strain in metal thin films grown at low temperature has recently been revealed via X-ray diffraction and explained by the assumption that a large number of vacancies were incorporated into the growing films. The results of the molecular dynamics and parallel temperature-accelerated dynamics simulations suggest that the key factor responsible for the experimentally observed strain is an increased nanoscale surface roughness due to the suppression of thermally activated events combined with the effects of shadowing due to off-normal deposition conditions.

  16. Development of low-cost polymer film solar collectors. Annual report

    SciTech Connect (OSTI)

    Andrews, J.W.; Le Doux, P.; Metz, P.D.; Wilhelm, W.G.

    1983-09-01

    This report covers work performed on the Brookhaven National Laboratory polymer film collector project during the period October 1, 1981 to November 1, 1982, in four major areas of endeavor: materials, engineering, economics, and testing. It also describes the search for solutions to the major problem - delamination of the polymer and metal sheets in the absorber - which occurred during the severe conditions associated with solar cooling applications. Finally, it outlines the plan of work for fiscal year 1983.

  17. YEAR

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal GasAdministration Medal01 Sandia4)9 Federal RegisterStorm1 3 6370-Rev.National26 YEAR

  18. YEAR

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal GasAdministration Medal01 Sandia4)9 Federal RegisterStorm1 3 6370-Rev.National26 YEAR93

  19. YEAR

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal GasAdministration Medal01 Sandia4)9 Federal RegisterStorm1 3 6370-Rev.National26 YEAR93

  20. YEAR

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal GasAdministration Medal01 Sandia4)9 Federal RegisterStorm1 3 6370-Rev.National26 YEAR9374

  1. YEAR

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal GasAdministration Medal01 Sandia4)9 Federal RegisterStorm1 3 6370-Rev.National268 YEAR

  2. YEAR

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal GasAdministration Medal01 Sandia4)9 Federal RegisterStorm1 3 6370-Rev.National268 YEAR17

  3. YEAR

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal GasAdministration Medal01 Sandia4)9 Federal RegisterStorm1 3 6370-Rev.National268255 YEAR

  4. YEAR

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal GasAdministration Medal01 Sandia4)9 Federal RegisterStorm1 3446 YEAR 2014 Males 1626

  5. YEAR

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal GasAdministration Medal01 Sandia4)9 Federal RegisterStorm1 3446 YEAR 2014 Males 16268

  6. YEAR

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal GasAdministration Medal01 Sandia4)9 Federal RegisterStorm1 3446 YEAR 2014 Males 16268563

  7. YEAR

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal GasAdministration Medal01 Sandia4)9 Federal RegisterStorm1 3446 YEAR 2014 Males 162685638

  8. YEAR

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity of NaturalDukeWakefield Municipal GasAdministration Medal01 Sandia4)9 Federal RegisterStorm1 3446 YEAR 2014 Males

  9. Glass heat pipe evacuated tube solar collector

    DOE Patents [OSTI]

    McConnell, Robert D. (Lakewood, CO); Vansant, James H. (Tracy, CA)

    1984-01-01

    A glass heat pipe is adapted for use as a solar energy absorber in an evacuated tube solar collector and for transferring the absorbed solar energy to a working fluid medium or heat sink for storage or practical use. A capillary wick is formed of granular glass particles fused together by heat on the inside surface of the heat pipe with a water glass binder solution to enhance capillary drive distribution of the thermal transfer fluid in the heat pipe throughout the entire inside surface of the evaporator portion of the heat pipe. Selective coatings are used on the heat pipe surface to maximize solar absorption and minimize energy radiation, and the glass wick can alternatively be fabricated with granular particles of black glass or obsidian.

  10. Alignment method for solar collector arrays

    DOE Patents [OSTI]

    Driver, Jr., Richard B

    2012-10-23

    The present invention is directed to an improved method for establishing camera fixture location for aligning mirrors on a solar collector array (SCA) comprising multiple mirror modules. The method aligns the mirrors on a module by comparing the location of the receiver image in photographs with the predicted theoretical receiver image location. To accurately align an entire SCA, a common reference is used for all of the individual module images within the SCA. The improved method can use relative pixel location information in digital photographs along with alignment fixture inclinometer data to calculate relative locations of the fixture between modules. The absolute locations are determined by minimizing alignment asymmetry for the SCA. The method inherently aligns all of the mirrors in an SCA to the receiver, even with receiver position and module-to-module alignment errors.

  11. Apparatus and method for maintaining low temperatures about an object at a remote location

    DOE Patents [OSTI]

    Steyert, Jr., William A. (Los Alamos, NM); Overton, Jr., William C. (Los Alamos, NM)

    1982-01-01

    The disclosure is directed to an apparatus and method for maintaining a body at cryogenic temperatures at a remote location such as down a borehole for an extended period of time. A housing contains a body comprising a material having a high specific heat at cryogenic temperatures such as between about 2 and 15 K. The body contains an orifice for containing an instrument or instruments operable at superconducting temperatures. The apparatus is precooled at the surface and lowered into a borehole to a desired depth, such as 2 to 3 miles. The instruments are operated, and the apparatus withdrawn, the material of the body maintaining the very low temperatures at which the instrument(s) operate for a sufficient period of time at the remote or downhole location. The material may comprise a rare earth compound, such as Gd.sub.2 O.sub.3, Gd.sub.2 Se.sub.3, Gd.sub.2 O.sub.2 S or GdAlO.sub.3. Monoclinic and C-phase gadolinium oxides work well. A low temperature is maintainable at a remote location for several hours.

  12. Apparatus and method for maintaining low temperatures about an object at a remote location. [Patent application

    DOE Patents [OSTI]

    Steyert, W.A. Jr.; Overton, W.C. Jr.

    1980-10-29

    The disclosure is directed to an apparatus and method for maintaining a body at cryogenic temperatures at a remote location such as down a borehole for an extended period of time. A housing contains a body comprising a material having a high specific heat at cryogenic temperatures such as between about 2 and 15 K. The body contains an orifice for containing an instrument or instruments operable at superconducting temperatures. The apparatus is precooled at the surface and lowered into a borehole to a desired depth, such as 2 to 3 miles. The instruments are operated, and the apparatus withdrawn, the material of the body maintaining the very low temperatures at which the instrument(s) operate for a sufficient period of time at the remote or downhole location. The material may comprise a rare earth compound, such as Gd/sub 2/O/sub 3/, Gd/sub 2/Se/sub 3/, Gd/sub 2/O/sub 2/S or GdAlO/sub 3/. Monoclinic and C-phase gadolinium oxides work well. A low temperature is maintainable at a remote location for several hours.

  13. Casimir-Foucault interaction: Free energy and entropy at low temperature

    SciTech Connect (OSTI)

    Intravaia, Francesco; Ellingsen, Simen A.; Henkel, Carsten [Theoretical Division, MS B213, Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States); Department of Energy and Process Engineering, Norwegian University of Science and Technology, N-7491 Trondheim (Norway); Institut fuer Physik und Astronomie, Universitaet Potsdam, Karl-Liebknecht-Strasse 24/25, D-14476 Potsdam (Germany)

    2010-09-15

    It was recently found that thermodynamic anomalies which arise in the Casimir effect between metals described by the Drude model can be attributed to the interaction of fluctuating Foucault (or eddy) currents [F. Intravaia and C. Henkel, Phys. Rev. Lett. 103, 130405 (2009).] We focus on the transverse electric (TE) polarization, where the anomalies occur, and show explicitly that the two leading terms of the low-temperature correction to the Casimir free energy of interaction between two plates are identical to those pertaining to the Foucault current interaction alone, up to a correction which is very small for good metals. Moreover, a mode density along real frequencies is introduced, showing that the TE contribution to the Casimir free energy, as given by the Lifshitz theory, separates in a natural manner into contributions from eddy currents and propagating cavity modes, respectively. The latter have long been known to be of little importance to the low-temperature Casimir anomalies. This convincingly demonstrates that eddy current modes are responsible for the large temperature correction to the Casimir effect between Drude metals, predicted by the Lifshitz theory, but not observed in experiments.

  14. Low temperature formation of electrode having electrically conductive metal oxide surface

    DOE Patents [OSTI]

    Anders, Simone (Albany, CA); Anders, Andre (Albany, CA); Brown, Ian G. (Berkeley, CA); McLarnon, Frank R. (Orinda, CA); Kong, Fanping (Berkeley, CA)

    1998-01-01

    A low temperature process is disclosed for forming metal suboxides on substrates by cathodic arc deposition by either controlling the pressure of the oxygen present in the deposition chamber, or by controlling the density of the metal flux, or by a combination of such adjustments, to thereby control the ratio of oxide to metal in the deposited metal suboxide coating. The density of the metal flux may, in turn, be adjusted by controlling the discharge current of the arc, by adjusting the pulse length (duration of on cycle) of the arc, and by adjusting the frequency of the arc, or any combination of these parameters. In a preferred embodiment, a low temperature process is disclosed for forming an electrically conductive metal suboxide, such as, for example, an electrically conductive suboxide of titanium, on an electrode surface, such as the surface of a nickel oxide electrode, by such cathodic arc deposition and control of the deposition parameters. In the preferred embodiment, the process results in a titanium suboxide-coated nickel oxide electrode exhibiting reduced parasitic evolution of oxygen during charging of a cell made using such an electrode as the positive electrode, as well as exhibiting high oxygen overpotential, resulting in suppression of oxygen evolution at the electrode at full charge of the cell.

  15. Investigating the low-temperature impedance increase of lithium-ion cells.

    SciTech Connect (OSTI)

    Abraham, D. P.; Heaton, J. R.; Kang, S.-H.; Dees, D. W.; Jansen, A. N.; Chemical Engineering

    2008-01-01

    Low-temperature performance loss is a significant barrier to commercialization of lithium-ion cells in hybrid electric vehicles. Increased impedance, especially at temperatures below 0 C, reduces the cell pulse power performance required for cold engine starts, quick acceleration, or regenerative braking. Here we detail electrochemical impedance spectroscopy data on binder- and carbon-free layered-oxide and spinel-oxide electrodes, obtained over the +30 to ?30 C temperature range, in coin cells containing a lithium-preloaded Li{sub 4/3}Ti{sub 5/3}O{sub 4} composite (LTOc) counter electrode and a LiPF{sub 6}-bearing ethylene carbonate/ethyl methyl carbonate electrolyte. For all electrodes studied, the impedance increased with decreasing cell temperature; the increases observed in the midfrequency arc dwarfed the increases in ohmic resistance and diffusional impedance. Our data suggest that the movement of lithium ions across the electrochemical interface on the active material may have been increasingly hindered at lower temperatures, especially below 0 C. Low-temperature performance may be improved by modifying the electrolyte-active material interface (for example, through electrolyte composition changes). Increasing surface area of active particles (for example, through nanoparticle use) can lower the initial electrode impedance and lead to lower cell impedances at -30 C.

  16. MODELING COMPETITIVE ADSORPTION IN UREA-SCR CATALYSTS FOR EFFECTIVE LOW TEMPERATURE NOX CONTROL

    SciTech Connect (OSTI)

    Devarakonda, Maruthi N.; Tonkyn, Russell G.; Tran, Diana N.; Lee, Jong H.; Herling, Darrell R.

    2010-09-17

    Although the SCR technology exhibits higher NOx reduction efficiency over a wider range of temperatures among the lean NOx reduction technologies, further improvement in low-temperature performance is required to meet the future emission standards and to lower the system cost. In order to improve the catalyst technologies and optimize the system performance, it is critical to understand the reaction mechanisms and catalyst behaviors with respect to operating conditions. For example, it is well known that the ammonia coverage on catalyst surface is critical for NOx reduction efficiency. However, the level of ammonia storage is influenced by competitive adsorption by other species, such as H2O and NO2. Moreover, hydrocarbon species that slip through the upstream DOC during the cold-start period can also inhibit the SCR performance, especially at low temperatures. Therefore, a one-dimensional detailed kinetic model that can account for the effects of such competitive adsorption has been developed based on steady state surface isotherm tests on a commercial Fe-zeolite catalyst. The model is developed as a C language S-function and implemented in Matlab/Simulink environment. Rate kinetics of adsorption and desorption of each of the adsorbents are determined from individual adsorption tests and validated for a set of test conditions that had all the adsorbents in the feed gas.

  17. Low temperature pyrotechnic smokes: A potential low cost alternative to nonpyrotechnic smoke for access delay applications

    SciTech Connect (OSTI)

    Greenholt, C.J.

    1995-07-01

    Smokes are frequently used as visual obscurants in access delay applications. A new generation of low temperature pyrotechnic smokes is being developed. Terephthalic Acid (TPA) smoke was developed by the U.S. Army and Sebacic Acid (SA) smoke is being developed by Thiokol Corp. The advantages these smokes offer over traditional pyrotechnic smokes include; low generation temperature (approximately 450{degree}C), lower toxicity, and lower corrosivity. The low generation temperature reduces smoke layering effects and allows the addition of sensory irritants, such as o-Chlorobenzylidene Malononitrile (CS), to the formulation. Some advantages low temperature pyrotechnic smokes offer over nonpyrotechnic smokes include; low cost, simplicity, compactness, light weight, long storage life, and orientation insensitive operation. Low cost permits distribution of multiple units for reduced vulnerability and refill flexibility. Some disadvantages may include the combustibility of the smoke particulate; however, the published lower explosive limit of the mentioned materials is approximately ten times greater than the concentration required for effective obscuration. The TPA smoke cloud contains small quantities of benzene, formaldehyde, and carbon monoxide; no benzene or formaldehyde was identified during preliminary SA smoke analyses performed by Thiokol Corp. Sandia performed tests and analyses on TPA smoke to determine the smoke cloud composition, the quantity of particulate produced per canister, and the relationship between airborne particulate concentration and measured optical density values. Current activities include characterization of SA smoke.

  18. A University Consortium on Low Temperature Combustion for High Efficiency, Ultra-Low Emission Engines

    SciTech Connect (OSTI)

    Dennis N. Assanis; Arvind Atreya; Jyh-Yuan Chen; Wai K. Cheng; Robert W. Dibble; Chris Edwards; Zoran S. Filipi; Christian Gerdes; Hong Im; George A. Lavoie; Margaret S. Wooldridge

    2009-12-31

    The objective of the University consortium was to investigate the fundamental processes that determine the practical boundaries of Low Temperature Combustion (LTC) engines and develop methods to extend those boundaries to improve the fuel economy of these engines, while operating with ultra low emissions. This work involved studies of thermal effects, thermal transients and engine management, internal mixing and stratification, and direct injection strategies for affecting combustion stability. This work also examined spark-assisted Homogenous Charge Compression Ignition (HCCI) and exhaust after-treatment so as to extend the range and maximize the benefit of Homogenous Charge Compression Ignition (HCCI)/ Partially Premixed Compression Ignition (PPCI) operation. In summary the overall goals were: ? Investigate the fundamental processes that determine the practical boundaries of Low Temperature Combustion (LTC) engines. ? Develop methods to extend LTC boundaries to improve the fuel economy of HCCI engines fueled on gasoline and alternative blends, while operating with ultra low emissions. ? Investigate alternate fuels, ignition and after-treatment for LTC and Partially Premixed compression Ignition (PPCI) engines.

  19. Two stage, low temperature, catalyzed fluidized bed incineration with in situ neutralization for radioactive mixed wastes

    SciTech Connect (OSTI)

    Wade, J.F.; Williams, P.M.

    1995-05-17

    A two stage, low temperature, catalyzed fluidized bed incineration process is proving successful at incinerating hazardous wastes containing nuclear material. The process operates at 550{degrees}C and 650{degrees}C in its two stages. Acid gas neutralization takes place in situ using sodium carbonate as a sorbent in the first stage bed. The feed material to the incinerator is hazardous waste-as defined by the Resource Conservation and Recovery Act-mixed with radioactive materials. The radioactive materials are plutonium, uranium, and americium that are byproducts of nuclear weapons production. Despite its low temperature operation, this system successfully destroyed poly-chlorinated biphenyls at a 99.99992% destruction and removal efficiency. Radionuclides and volatile heavy metals leave the fluidized beds and enter the air pollution control system in minimal amounts. Recently collected modeling and experimental data show the process minimizes dioxin and furan production. The report also discusses air pollution, ash solidification, and other data collected from pilot- and demonstration-scale testing. The testing took place at Rocky Flats Environmental Technology Site, a US Department of Energy facility, in the 1970s, 1980s, and 1990s.

  20. One-Dimensional Ceria as Catalyst for the Low-Temperature Water-Gas Shift Reaction

    SciTech Connect (OSTI)

    Han, W.; Wen, W; Hanson, J; Teng, X; Marinkovic, N; Rodriguez, J

    2009-01-01

    Synchrotron-based in situ time-resolved X-ray diffraction and X-ray absorption spectroscopy were used to study pure ceria and Pd-loaded ceria nanotubes and nanorods (1D-ceria) as catalysts for the water-gas shift (WGS) reaction. While bulk ceria is very poor as WGS catalysts, pure 1D-ceria displayed catalytic activity at a temperature as low as 300 C. The reduction of the pure 1D-ceria in pure hydrogen started at 150 C, which is a much lower temperature than those previously reported for the reduction of 3D ceria nanoparticles. This low reduction temperature reflects the novel morphology of the oxide systems and may be responsible for the low-temperature WGS catalytic activity seen for the 1D-ceria. Pd-loaded 1D ceria displayed significant WGS activity starting at 200 C. During pretreatment in H{sub 2}, the ceria lattice parameter increased significantly around 60 C, which indicates that Pd-oxygen interactions may facilitate the reduction of Pd-loaded 1D-ceria. Pd and ceria both participate in the formation of the active sites for the catalytic reactions. The low-temperature hydrogen pretreatment results in higher WGS activity for Pd-loaded 1D-ceria.

  1. Low Temperature Autoignition of C8H16O2 Ethyl and Methyl Esters in a Motored Engine

    Office of Energy Efficiency and Renewable Energy (EERE)

    The alkyl chain of fatty acid esters experience the typical paraffin-like low temperature oxidation sequence; the alkyl chain length of fatty acid esters has a crucial impact on the ignition behavior of fatty acid esters

  2. Vehicle Technologies Office Merit Review 2014: Low Temperature Emission Control to Enable Fuel-Efficient Engine Commercialization

    Broader source: Energy.gov [DOE]

    Presentation given by Oak Ridge National Laboratory at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about low temperature...

  3. The Characterization of Two-Stage Ignition Effects on Late Injection Low Temperature Combustion Using Biodiesel and Biodiesel Blends 

    E-Print Network [OSTI]

    Tompkins, Brandon T

    2015-08-12

    The first stage of ignition in saturated hydrocarbon fuels (in diesel combustion) is characterized as low temperature heat release (LTHR) or cool flame combustion. LTHR takes place as a series of isomerization reactions at temperatures from 600K...

  4. Vehicle Technologies Office Merit Review 2015: Low Temperature Emission Control to Enable Fuel-Efficient Engine Commercialization

    Office of Energy Efficiency and Renewable Energy (EERE)

    Presentation given by Oak Ridge National Laboratory at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about low temperature...

  5. Low-Temperature Synthesis of Anatase TiO[subscript 2] Nanoparticles with Tunable Surface Charges for Enhancing Photocatalytic Activity

    E-Print Network [OSTI]

    Li, Ye

    In this work, the positively or negatively charged anatase TiO[subscript 2] nanoparticles were synthesized via a low temperature precipitation-peptization process (LTPPP) in the presence of poly(ethyleneimine) (PEI) and ...

  6. Low-temperature germanium ultra-high vacuum chemical vapor deposition for back-end photonic integration

    E-Print Network [OSTI]

    Kimerling, Lionel C.

    Polycrystalline germanium (poly-Ge) grown on amorphous Si (a-Si) by ultra-high vacuum chemical vapor deposition (UHVCVD) over oxide barriers at low temperatures (Tles450degC) exhibits a larger grain size and lower defect ...

  7. LCD, low-temperature soldering and compound semiconductor : the sources, market, applications and future prospects of indium in Malaysia

    E-Print Network [OSTI]

    Yong, Foo Nun

    2006-01-01

    Indium is a minor but very valuable metal. Decreasing supplies of indium from refining and increasing demands from LCD, low-temperature soldering and compound semiconductors have stimulated the indium price increase ...

  8. Development of Low Temperature Combustion Modes to Reduce Overall Emissions from a Medium-Duty, Four Cylinder Diesel Engine 

    E-Print Network [OSTI]

    Breen, Jonathan Robert

    2011-10-21

    Low temperature combustion (LTC) is an appealing new method of combustion that promises low nitric oxides and soot emissions while maintaining or improving on engine performance. The three main points of this study were ...

  9. Low-temperature magnetron sputter-deposition, hardness, and electrical resistivity of amorphous and crystalline alumina thin films

    E-Print Network [OSTI]

    Marks, Laurence D.

    have many properties that are useful for applications in optical electronics, and cutting tool be coated with alumina. Therefore, low-temperature synthesis of crystalline alumina is of great

  10. Very low temperature radiant heating/cooling indoor end system for efficient use of renewable energies

    SciTech Connect (OSTI)

    Ren, Jianbo; Wang, Yiping; Wang, Congrong; Xiong, Weicheng; Zhu, Li

    2010-06-15

    Solar or solar-assisted space heating systems are becoming more and more popular. The solar energy utilization efficiency is high when the collector is coupled with indoor radiant heating suppliers, since in principle, lower supply temperature means lower demand temperature and then the system heat loss is less. A new type radiant end system is put forward for even lower supply temperature compared to the conventional radiant floor heating systems. A three dimensional model was established to investigate its energy supply capacities. Simulation results show that 50 W per meter length tube can be achieved with the medium temperature of 30 C for heating and 15 C for cooling. The predicted results agree well with the actual data from a demonstration building. Furthermore, it is demonstrated that a supply temperature of 22 C in winter and of 17 C in summer already met the indoor requirements. The new end system has good prospects for effective use of local renewable resources. (author)

  11. Electron beam collector for a microwave power tube

    DOE Patents [OSTI]

    Dandl, Raphael A. (Oak Ridge, TN)

    1980-01-01

    This invention relates to a cylindrical, electron beam collector that efficiently couples the microwave energy out of a high power microwave source while stopping the attendant electron beam. The interior end walls of the collector are a pair of facing parabolic mirrors and the microwave energy from an input horn is radiated between the two mirrors and reassembled at the entrance to the output waveguide where the transmitted mode is reconstructed. The mode transmission through the collector of the present invention has an efficiency of at least 94%.

  12. Conductivity fuel cell collector plate and method of fabrication

    SciTech Connect (OSTI)

    Braun, James C. (Juno Beach, FL)

    2002-01-01

    An improved method of manufacturing a PEM fuel cell collector plate is disclosed. During molding a highly conductive polymer composite is formed having a relatively high polymer concentration along its external surfaces. After molding the polymer rich layer is removed from the land areas by machining, grinding or similar process. This layer removal results in increased overall conductivity of the molded collector plate. The polymer rich surface remains in the collector plate channels, providing increased mechanical strength and other benefits to the channels. The improved method also permits greater mold cavity thickness providing a number of advantages during the molding process.

  13. Theoretical and experimental investigation of heat pipe solar collector

    SciTech Connect (OSTI)

    Azad, E.

    2008-09-15

    Heat pipe solar collector was designed and constructed at IROST and its performance was measured on an outdoor test facility. The thermal behavior of a gravity assisted heat pipe solar collector was investigated theoretically and experimentally. A theoretical model based on effectiveness-NTU method was developed for evaluating the thermal efficiency of the collector, the inlet, outlet water temperatures and heat pipe temperature. Optimum value of evaporator length to condenser length ratio is also determined. The modelling predictions were validated using experimental data and it shows that there is a good concurrence between measured and predicted results. (author)

  14. Scale Resistant Heat Exchanger for Low Temperature Geothermal Binary Cycle Power Plant

    SciTech Connect (OSTI)

    Hays, Lance G.

    2014-11-18

    Phase 1 of the investigation of improvements to low temperature geothermal power systems was completed. The improvements considered were reduction of scaling in heat exchangers and a hermetic turbine generator (eliminating seals, seal system, gearbox, and lube oil system). A scaling test system with several experiments was designed and operated at Coso geothermal resource with brine having a high scaling potential. Several methods were investigated at the brine temperature of 235 ºF. One method, circulation of abradable balls through the brine passages, was found to substantially reduce scale deposits. The test heat exchanger was operated with brine outlet temperatures as low as 125 ºF, which enables increased heat input available to power conversion systems. For advanced low temperature cycles, such as the Variable Phase Cycle (VPC) or Kalina Cycle, the lower brine temperature will result in a 20-30% increase in power production from low temperature resources. A preliminary design of an abradable ball system (ABS) was done for the heat exchanger of the 1 megawatt VPC system at Coso resource. The ABS will be installed and demonstrated in Phase 2 of this project, increasing the power production above that possible with the present 175 ºF brine outlet limit. A hermetic turbine generator (TGH) was designed and manufacturing drawings produced. This unit will use the working fluid (R134a) to lubricate the bearings and cool the generator. The 200 kW turbine directly drives the generator, eliminating a gearbox and lube oil system. Elimination of external seals eliminates the potential of leakage of the refrigerant or hydrocarbon working fluids, resulting in environmental improvement. A similar design has been demonstrated by Energent in an ORC waste heat recovery system. The existing VPC power plant at Coso was modified to enable the “piggyback” demonstration of the TGH. The existing heat exchanger, pumps, and condenser will be operated to provide the required process conditions for the TGH demonstration. Operation of the TGH with and without the ABS system will demonstrate an increase in geothermal resource productivity for the VPC from 1 MW/(million lb) of brine to 1.75 MW/(million lb) of brine, a 75% increase.

  15. Characterization of neutron transmutation doped (NTD) Ge for low temperature sensor development

    E-Print Network [OSTI]

    S. Mathimalar; V. Singh; N. Dokania; V. Nanal; R. G. Pillay; S. Pal; S. Ramakrishnan; A. Shrivastava; Priya Maheshwari; P. K. Pujari; S. Ojha; D. Kanjilal; K. C. Jagadeesan; S. V. Thakare

    2014-12-05

    Development of NTD Ge sensors has been initiated for low temperature (mK) thermometry in The India-based Tin detector (TIN.TIN). NTD Ge sensors are prepared by thermal neutron irradiation of device grade Ge samples at Dhruva reactor, BARC, Mumbai. Detailed measurements have been carried out in irradiated samples for estimating the carrier concentration and fast neutron induced defects. The Positron Annihilation Lifetime Spectroscopy (PALS) measurements indicated monovacancy type defects for all irradiated samples, while Channeling studies employing RBS with 2 MeV alpha particles, revealed no significant defects in the samples exposed to fast neutron fluence of $\\sim 4\\times10^{16}/cm^2$. Both PALS and Channeling studies have shown that vacuum annealing at 600 $^\\circ$C for $\\sim2$ hours is sufficient to recover the damage in the irradiated samples, thereby making them suitable for the sensor development.

  16. Rheological properties vs Local Dynamics in model disordered materials at Low Temperature

    E-Print Network [OSTI]

    C. Fusco; T. Albaret; A. Tanguy

    2014-03-31

    We study the rheological response at low temperature of a sheared model disordered material as a function of the bond rigidity. We find that the flow curves follow a Herschel-Bulkley law, whatever is the bond rigidity, with an exponent close to 0.5. Interestingly, the apparent viscosity can be related to a single relevant time scale $t_{rel}$, suggesting a strong connection between the local dynamics and the global mechanical behaviour. We propose a model based on the competition between the nucleation and the avalanche-like propagation of spatial strain heterogeneities. This model can explain the Herschel-Bulkley exponent on the basis of the size dependence of the heterogeneities on the shear rate.

  17. Single Molecule Switches and Molecular Self-Assembly: Low Temperature STM Investigations and Manipulations

    SciTech Connect (OSTI)

    Iancu, Violeta

    2006-08-01

    This dissertation is devoted to single molecule investigations and manipulations of two porphyrin-based molecules, chlorophyll-a and Co-popphyrin. The molecules are absorbed on metallic substrates and studied at low temperatures using a scanning tunneling microscope. The electronic, structural and mechanical properties of the molecules are investigated in detail with atomic level precision. Chlorophyll-a is the key ingredient in photosynthesis processes while Co-porphyrin is a magnetic molecule that represents the recent emerging field of molecular spintronics. Using the scanning tunneling microscope tip and the substrate as electrodes, and the molecules as active ingredients, single molecule switches made of these two molecules are demonstrated. The first switch, a multiple and reversible mechanical switch, is realized by using chlorophyll-a where the energy transfer of a single tunneling electron is used to rotate a C-C bond of the molecule's tail on a Au(111) surface. Here, the det

  18. Kinetics of Methane Hydrate Decomposition Studied via in Situ Low Temperature X-ray Powder Diffraction

    SciTech Connect (OSTI)

    Everett, Susan M; Rawn, Claudia J; Keffer, David J.; Mull, Derek L; Payzant, E Andrew; Phelps, Tommy Joe

    2013-01-01

    Gas hydrates are known to have a slowed decomposition rate at ambient pressure and temperatures below the melting point of ice termed self-preservation or anomalous preservation. As hydrate exothermically decomposes, gas is released and water of the clathrate cages transforms into ice. Two regions of slowed decomposition for methane hydrate, 180 200 K and 230 260 K, were observed, and the kinetics were studied by in situ low temperature x-ray powder diffraction. The kinetic constants for ice formation from methane hydrate were determined by the Avrami model within each region and activation energies, Ea, were determined by the Arrhenius plot. Ea determined from the data for 180 200 K was 42 kJ/mol and for 230 260 K was 22 kJ/mol. The higher Ea in the colder temperature range was attributed to a difference in the microstructure of ice between the two regions.

  19. Low temperature magnetic properties of magnesium substituted YbMnO{sub 3}

    SciTech Connect (OSTI)

    Sattibabu, Bhumireddi Bhatnagar, Anil K. Mohan, Dasari Das, Dibakar Sundararaman, Mahadevan; Siruguri, Vasudeva; Rayaprol, Sudhindra

    2014-04-24

    Structural and magnetic properties of polycrystalline Yb{sub 1?x}Mg{sub x}MnO{sub 3} (x = 0, 0.05 and 0.10) hexagonal compounds prepared by solid state method, have been studied. The structural analyses of the samples were carried out by Rietveld analysis of neutron diffraction data. With increasing Mg content, we find that the lattice parameter a decreases and c increases whereas the overall Mn-O bond length decreases. Magnetization measured as a function of magnetic field at 2.5 K exhibits hysteresis, which is attributed to ferromagnetic like ordering of Yb{sup 3+} sublattice. Temperature dependence of ac magnetic susceptibility, ?{sub ac}(T), shows no signature of spin-glass behavior. ?”(T) exhibits a sudden increase at low temperatures which is due to ordering of Yb{sup 3+} sublattice.

  20. Detailed kinetic models for the low-temperature auto ignition of gasoline surrogates

    E-Print Network [OSTI]

    Bounaceur, Roda; Fournet, René; Warth, Valérie; Battin-Leclerc, Frédérique

    2009-01-01

    In the context of the search for gasoline surrogates for kinetic modeling purpose, this paper describes a new model for the low-temperature auto-ignition of n-heptane/iso-octane/hexene/toluene blends for the different linear isomers of hexene. The model simulates satisfactory experimental results obtained in a rapid compression machine for temperatures ranging from 650 to 850 K in the case of binary and ternary mixtures including iso octane, 1-hexene and toluene. Predictive simulations have also been performed for the autoignition of n heptane/iso octane/hexene/toluene quaternary mixtures: the predicted reactivity is close to that of pure iso octane with a retarding effect when going from 1- to 3-alkene.

  1. Low-temperature ferromagnetic properties in Co-doped Ag{sub 2}Se nanoparticles

    SciTech Connect (OSTI)

    Yang, Fengxia E-mail: xia9020@hust.edu.cn; Yu, Gen; Han, Chong; Liu, Tingting; Zhang, Duanming; Xia, Zhengcai E-mail: xia9020@hust.edu.cn

    2014-01-06

    ?-Ag{sub 2}Se is a topologically nontrivial insulator. The magnetic properties of Co-doped Ag{sub 2}Se nanoparticles with Co concentrations up to 40% were investigated. The cusp of zero-field-cooling magnetization curves and the low-temperature hysteresis loops were observed. With increasing concentration of Co{sup 2+} ions mainly substituting Ag{sub I} sites in the Ag{sub 2}Se structure, the resistivity, Curie temperature T{sub c}, and magnetization increased. At 10?T, a sharp drop of resistance near T{sub c} was detected due to Co dopants. The ferromagnetic behavior in Co-doped Ag{sub 2}Se might result from the intra-layer ferromagnetic coupling and surface spin. This magnetic semiconductor is a promising candidate in electronics and spintronics.

  2. Low-temperature plasma-deposited silicon epitaxial films: Growth and properties

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Demaurex, Bénédicte; Bartlome, Richard; Seif, Johannes P.; Geissbühler, Jonas; Alexander, Duncan T. L.; Jeangros, Quentin; Ballif, Christophe; De Wolf, Stefaan

    2014-08-05

    Low-temperature (? 180 °C) epitaxial growth yields precise thickness, doping, and thermal-budget control, which enables advanced-design semiconductor devices. In this paper, we use plasma-ehanced chemical vapor deposition to grow homo-epitaxial layers and study the different growth modes on crystalline silicon substrates. In particular, we determine the conditions leading to epitaxial growth in light of a model that depends only on the silane concentration in the plasma and the mean free path length of surface adatoms. For such growth, we show that the presence of a persistent defective interface layer between the crystalline silicon substrate and the epitaxial layer stems notmore »only from the growth conditions but also from unintentional contamination of the reactor. As a result of our findings, we determine the plasma conditions to grow high-quality bulk epitaxial films and propose a two-step growth process to obtain device-grade material.« less

  3. Collision dynamics of polyatomic molecules containing carbon rings at low temperatures

    SciTech Connect (OSTI)

    Li, Zhiying; Heller, Eric J.; Krems, Roman V.

    2014-09-14

    We explore the collision dynamics of complex hydrocarbon molecules (benzene, coronene, adamantane, and anthracene) containing carbon rings in a cold buffer gas of {sup 3}He. For benzene, we present a comparative analysis of the fully classical and fully quantum calculations of elastic and inelastic scattering cross sections at collision energies between 1 and 10 cm{sup ?1}. The quantum calculations are performed using the time-independent coupled channel approach and the coupled-states approximation. We show that the coupled-states approximation is accurate at collision energies between 1 and 20 cm{sup ?1}. For the classical dynamics calculations, we develop an approach exploiting the rigidity of the carbon rings and including low-energy vibrational modes without holonomic constraints. Our results illustrate the effect of the molecular shape and the vibrational degrees of freedom on the formation of long-lived resonance states that lead to low-temperature clustering.

  4. Low energy conversion electron detection in superfluid He3 at ultra-low temperature

    E-Print Network [OSTI]

    E. Moulin; C. Winkelmann; J. F. Macias-Perez; Yu. M. Bunkov; H. Godfrin; D. Santos

    2005-04-12

    We report on the first results of the MACHe3 (MAtrix of Cells of Helium 3) prototype experiment concerning the measurement of low energy conversion electrons at ultra-low temperature. For the first time, the feasibility of the detection of low energy electrons is demonstrated in superfluid He3-B cooled down to 100 microK. Low energy electrons at 7.3 keV coming from the K shell conversion of the 14.4 keV nuclear transition of a low activity Co57 source are detected, opening the possibility to use a He3-based detector for the detection of Weakly Interacting Massive Particles (WIMPs) which are expected to release an amount of energy higher-bounded by 5.6 keV.

  5. Improved tunneling magnetoresistance at low temperature in manganite junctions grown by molecular beam epitaxy

    SciTech Connect (OSTI)

    Werner, R.; Kleiner, R.; Koelle, D.; Petrov, A. Yu.; Davidson, B. A.; Mino, L. Alvarez

    2011-04-18

    We report resistance versus magnetic field measurements for a La{sub 0.65}Sr{sub 0.35}MnO{sub 3}/SrTiO{sub 3}/La{sub 0.65}Sr{sub 0.35}MnO{sub 3} tunnel junction grown by molecular-beam epitaxy, that show a large field window of extremely high tunneling magnetoresistance (TMR) at low temperature. Scanning the in-plane applied field orientation through 360 deg., the TMR shows fourfold symmetry, i.e., biaxial anisotropy, aligned with the crystalline axis but not the junction geometrical long axis. The TMR reaches {approx}1900% at 4 K, corresponding to an interfacial spin polarization of >95% assuming identical interfaces. These results show that uniaxial anisotropy is not necessary for large TMR, and lay the groundwork for future improvements in TMR in manganite junctions.

  6. Optoelectronic and low temperature thermoelectric studies on nanostructured thin films of silver gallium selenide

    SciTech Connect (OSTI)

    Jacob, Rajani, E-mail: reenatara@rediffmail.com; Philip, Rachel Reena, E-mail: reenatara@rediffmail.com; Nazer, Sheeba, E-mail: reenatara@rediffmail.com; Abraham, Anitha, E-mail: reenatara@rediffmail.com; Nair, Sinitha B., E-mail: reenatara@rediffmail.com [Thin film research lab, U.C. College, Aluva, Kerala (India); Pradeep, B.; Urmila, K. S. [Solid State Physics Laboratory, Cochin University of Science and Technology, Cochin (India); Okram, G. S. [UGC-DAE CSR, Khandwa Road, Indore-452 001, Madhya Pradesh (India)

    2014-01-28

    Polycrystalline thin films of silver gallium selenide were deposited on ultrasonically cleaned soda lime glass substrates by multi-source vacuum co-evaporation technique. The structural analysis done by X-ray diffraction ascertained the formation of nano structured tetragonal chalcopyrite thin films. The compound formation was confirmed by X-ray photo-electron spectroscopy. Atomic force microscopic technique has been used for surface morphological analysis. Direct allowed band gap ?1.78eV with high absorption coefficient ?10{sup 6}/m was estimated from absorbance spectra. Low temperature thermoelectric effects has been investigated in the temperature range 80–330K which manifested an unusual increase in Seebeck coefficient with negligible phonon drag toward the very low and room temperature regime. The electrical resistivity of these n-type films was assessed to be ?2.6?m and the films showed good photo response.

  7. Low-temperature conversion of high-moisture biomass: Topical report, January 1984--January 1988

    SciTech Connect (OSTI)

    Sealock, L.J. Jr.; Elliott, D.C.; Butner, R.S.; Neuenschwander, G.G.

    1988-10-01

    Pacific Northwest Laboratory (PNL) is developing a low-temperature, catalytic process that converts high-moisture biomass feedstocks and other wet organic substances to useful gaseous and liquid fuels. The advantage of this process is that it works without the need for drying or dewatering the feedstock. Conventional thermal gasification processes, which require temperatures above 750/degree/C and air or oxygen for combustion to supply reaction heat, generally cannot utilize feedstocks with moisture contents above 50 wt %, as the conversion efficiency is greatly reduced as a result of the drying step. For this reason, anaerobic digestion or other bioconversion processes traditionally have been used for gasification of high-moisture feedstocks. However, these processes suffer from slow reaction rates and incomplete carbon conversion. 50 refs., 21 figs., 22 tabs.

  8. Platinum-Modulated Cobalt Nanocatalysts for Low-Temperature Aqueous-Phase Fischer Tropsch Synthesis

    SciTech Connect (OSTI)

    Wang, Hang [Peking University; Zhou, Wu [ORNL; Liu, JinXun [Dalian Institute of Chemical Physics; Si, Rui [Brookhaven National Laboratory (BNL); Sun, Geng [Peking University; Zhong, Mengqi [Peking University; Su, Haiyan [Peking University; Zhao, Huabo [Peking University; Rodrigues, Jose [Brookhaven National Laboratory (BNL); Pennycook, Stephen J [ORNL; Idrobo Tapia, Juan C [ORNL; Li, Weixue [Dalian Institute of Chemical Physics; Kou, Yuan [Peking University; Ma, Ding [Peking University

    2013-01-01

    Fischer Tropsch synthesis (FTS) is an important catalytic process for liquid fuel generation, which converts coal/shale gas/biomass-derived syngas (a mixture of CO and H2) to oil. While FTS is thermodynamically favored at low temperature, it is desirable to develop a new catalytic system that could allow working at a relatively low reaction temperature. In this article, we present a one-step hydrogenation reduction route for the synthesis of Pt Co nanoparticles (NPs) which were found to be excellent catalysts for aqueous-phase FTS at 433 K. Coupling with atomic-resolution scanning transmission electron microscopy (STEM) and theoretical calculations, the outstanding activity is rationalized by the formation of Co overlayer structures on Pt NPs or Pt Co alloy NPs. The improved energetics and kinetics from the change of the transition states imposed by the lattice mismatch between the two metals are concluded to be the key factors responsible for the dramatically improved FTS performance.

  9. CO2 hydrate dissociation at low temperatures - formation and annealing of ice Ic

    E-Print Network [OSTI]

    Falenty, Andrzej; Kuhs, Werner F

    2015-01-01

    Dissociation of gas hydrates below 240 K leads to the formation of a metastable form of water ice, so called cubic ice (Ic). Through its defective nature and small particle size the surface film composed of such material is incapable of creating any significant diffusion barrier. Above 160 K, cubic ice gradually transforms to the stable hexagonal (Ih) form on laboratory time scales. The annealing, coupled with a parallel decomposition of gas hydrates, accelerates as temperature rises but already above 190 K the first process prevails, transforming cubic stacking sequences in-to ordinary Ih ice within a few minutes. Remaining stacking faults are removed through very slow isothermal annealing or after heating up above 240 K. The role of the proportion of cubic stacking on the decomposition rate is discussed. A better understanding of the dissociation kinetics at low temperatures is particularly im-portant for the critical evaluation of existing hypotheses that consider clathrates as a potential medium that acti...

  10. Low-temperature plasma-deposited silicon epitaxial films: Growth and properties

    SciTech Connect (OSTI)

    Demaurex, Bénédicte, E-mail: benedicte.demaurex@epfl.ch; Bartlome, Richard; Seif, Johannes P.; Geissbühler, Jonas; Ballif, Christophe; De Wolf, Stefaan [École Polytechnique Fédérale de Lausanne (EPFL), Institute of Microengineering (IMT), Photovoltaics and Thin-Film Electronics Laboratory, Maladière 71B, CH-2000 Neuchâtel (Switzerland); Alexander, Duncan T. L.; Jeangros, Quentin [École Polytechnique Fédérale de Lausanne (EPFL), Interdisciplinary Centre for Electron Microscopy (CIME), Station 12, CH-1015 Lausanne (Switzerland)

    2014-08-07

    Low-temperature (?200?°C) epitaxial growth yields precise thickness, doping, and thermal-budget control, which enables advanced-design semiconductor devices. In this paper, we use plasma-enhanced chemical vapor deposition to grow homo-epitaxial layers and study the different growth modes on crystalline silicon substrates. In particular, we determine the conditions leading to epitaxial growth in light of a model that depends only on the silane concentration in the plasma and the mean free path length of surface adatoms. For such growth, we show that the presence of a persistent defective interface layer between the crystalline silicon substrate and the epitaxial layer stems not only from the growth conditions but also from unintentional contamination of the reactor. Based on our findings, we determine the plasma conditions to grow high-quality bulk epitaxial films and propose a two-step growth process to obtain device-grade material.

  11. The Nosé–Hoover looped chain thermostat for low temperature thawed Gaussian wave-packet dynamics

    SciTech Connect (OSTI)

    Coughtrie, David J.; Tew, David P.

    2014-05-21

    We have used a generalised coherent state resolution of the identity to map the quantum canonical statistical average for a general system onto a phase-space average over the centre and width parameters of a thawed Gaussian wave packet. We also propose an artificial phase-space density that has the same behaviour as the canonical phase-space density in the low-temperature limit, and have constructed a novel Nosé–Hoover looped chain thermostat that generates this density in conjunction with variational thawed Gaussian wave-packet dynamics. This forms a new platform for evaluating statistical properties of quantum condensed-phase systems that has an explicit connection to the time-dependent Schrödinger equation, whilst retaining many of the appealing features of path-integral molecular dynamics.

  12. Low-temperature plasma-deposited silicon epitaxial films: Growth and properties

    SciTech Connect (OSTI)

    Demaurex, Bénédicte; Bartlome, Richard; Seif, Johannes P.; Geissbühler, Jonas; Alexander, Duncan T. L.; Jeangros, Quentin; Ballif, Christophe; De Wolf, Stefaan

    2014-08-07

    Low-temperature (? 180 °C) epitaxial growth yields precise thickness, doping, and thermal-budget control, which enables advanced-design semiconductor devices. In this paper, we use plasma-ehanced chemical vapor deposition to grow homo-epitaxial layers and study the different growth modes on crystalline silicon substrates. In particular, we determine the conditions leading to epitaxial growth in light of a model that depends only on the silane concentration in the plasma and the mean free path length of surface adatoms. For such growth, we show that the presence of a persistent defective interface layer between the crystalline silicon substrate and the epitaxial layer stems not only from the growth conditions but also from unintentional contamination of the reactor. Based on our findings, we determine the plasma conditions to grow high-quality bulk epitaxial films and propose a two-step growth process to obtain device-grade material.

  13. Modeling of scalar dissipation rates in flamelet models for low temperature combustion engine simulations

    E-Print Network [OSTI]

    Gupta, Saurabh; Pal, Pinaki; Im, Hong G

    2014-01-01

    The flamelet approach offers a viable framework for combustion modeling of homogeneous charge compression ignition (HCCI) engines under stratified mixture conditions. Scalar dissipation rate acts as a key parameter in flamelet-based combustion models which connects the physical mixing space to the reactive space. The aim of this paper is to gain fundamental insights into turbulent mixing in low temperature combustion (LTC) engines and investigate the modeling of scalar dissipation rate. Three direct numerical simulation (DNS) test cases of two-dimensional turbulent auto-ignition of a hydrogen-air mixture with different correlations of temperature and mixture fraction are considered, which are representative of different ignition regimes. The existing models of mean and conditional scalar dissipation rates, and probability density functions (PDFs) of mixture fraction and total enthalpy are a priori validated against the DNS data.

  14. Defect-free ZnO nanorods for low temperature hydrogen sensor applications

    SciTech Connect (OSTI)

    Ranwa, Sapana; Kumar, Mahesh; Kulriya, Pawan K.; Sahu, Vikas Kumar; Kukreja, L. M.

    2014-11-24

    Uniformly distributed and defect-free vertically aligned ZnO nanorods (NRs) with high aspect ratio are deposited on Si by sputtering technique. X-ray diffraction along with transmission electron microscopy studies confirmed the single crystalline wurtzite structure of ZnO. Absence of wide band emission in photoluminescence spectra showed defect-free growth of ZnO NRs which was further conformed by diamagnetic behavior of the NRs. H{sub 2} sensing mechanism based on the change in physical dimension of channel is proposed to explain the fast response (?21.6?s) and recovery times (?27?s) of ZnO NRs/Si/ZnO NRs sensors. Proposed H{sub 2} sensor operates at low temperature (?70?°C) unlike the existing high temperature (>150?°C) sensors.

  15. Nuclear spin conversion of water inside fullerene cages detected by low-temperature nuclear magnetic resonance

    SciTech Connect (OSTI)

    Mamone, Salvatore Concistrè, Maria; Carignani, Elisa; Meier, Benno; Krachmalnicoff, Andrea; Johannessen, Ole G.; Denning, Mark; Carravetta, Marina; Whitby, Richard J.; Levitt, Malcolm H.; Lei, Xuegong; Li, Yongjun; Goh, Kelvin; Horsewill, Anthony J.

    2014-05-21

    The water-endofullerene H{sub 2}O@C{sub 60} provides a unique chemical system in which freely rotating water molecules are confined inside homogeneous and symmetrical carbon cages. The spin conversion between the ortho and para species of the endohedral H{sub 2}O was studied in the solid phase by low-temperature nuclear magnetic resonance. The experimental data are consistent with a second-order kinetics, indicating a bimolecular spin conversion process. Numerical simulations suggest the simultaneous presence of a spin diffusion process allowing neighbouring ortho and para molecules to exchange their angular momenta. Cross-polarization experiments found no evidence that the spin conversion of the endohedral H{sub 2}O molecules is catalysed by {sup 13}C nuclei present in the cages.

  16. Full Scale Field Trial of the Low Temperature Mercury Capture Process

    SciTech Connect (OSTI)

    James Locke; Richard Winschel

    2011-09-30

    CONSOL Energy Inc., with partial funding from the Department of Energy (DOE) National Energy Technology Laboratory, designed a full-scale installation for a field trial of the Low-Temperature Mercury Control (LTMC) process, which has the ability to reduce mercury emissions from coal-fired power plants by over 90 percent, by cooling flue gas temperatures to approximately 230 °F and absorbing the mercury on the native carbon in the fly ash, as was recently demonstrated by CONSOL R&D on a slip-stream pilot plant at the Allegheny Energy Mitchell Station with partial support by DOE. LTMC has the potential to remove over 90 percent of the flue gas mercury at a cost at least an order of magnitude lower (on a $/lb mercury removed basis) than activated carbon injection. The technology is suitable for retrofitting to existing and new plants, and, although it is best suited to bituminous coal-fired plants, it may have some applicability to the full range of coal types. Installation plans were altered and moved from the original project host site, PPL Martins Creek plant, to a second host site at Allegheny Energyâ??s R. Paul Smith plant, before installation actually occurred at the Jamestown (New York) Board of Public Utilities (BPU) Samuel A. Carlson (Carlson) Municipal Generating Station Unit 12, where the LTMC system was operated on a limited basis. At Carlson, over 60% mercury removal was demonstrated by cooling the flue gas to 220-230 °F at the ESP inlet via humidification. The host unit ESP operation was unaffected by the humidification and performed satisfactorily at low temperature conditions.

  17. Self-Cleaning CSP Collectors, Concentrating Solar Power (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-09-01

    Boston University is one of the 2012 SunShot CSP R&D awardees for their advanced collectors. This fact sheet explains the motivation, description, and impact of the project.

  18. Hybrid solar collector using nonimaging optics and photovoltaic components

    E-Print Network [OSTI]

    2015-01-01

    thermal hybrid solar technology," Applied Energy, 87(2),thermal hybrid solar technology," Applied Energy, 87(2),thermal system, solar PVT collector, nonimaging optics, GaAs, solar energy,

  19. A Linear Parabolic Trough Solar Collector Performance Model 

    E-Print Network [OSTI]

    Qu, M.; Archer, D.; Masson, S.

    2006-01-01

    A performance model has been programmed for solar thermal collector based on a linear, tracking parabolic trough reflector focused on a surface-treated metallic pipe receiver enclosed in an evacuated transparent tube: a ...

  20. Project Profile: Advanced High Temperature Trough Collector Development

    Broader source: Energy.gov [DOE]

    The Solar Millennium Group and its subsidiary Flagsol, under the CSP R&D FOA, are completing work on an advanced parabolic trough collector that uses molten salt as a heat transfer fluid.